• Journal of Korean Academy of Nursing
• /
• v.25 no.1
• /
• pp.141-155
• /
• 1995

The objective of this study was to develop a scale to measure stress in infertile couples and to test its reliability and validity. Prior to item generation, a basic decision was made to conceptualize stress in infertile couples as including two dimensions and four subdimensions. The dimensions were, intrapersonal stress including cognitive and affective stress, and interpersonal stress including marital and social stress. Initially 95 items were generated from the inter-view data of 31 primary or secondary infertile women and from a literature review. These items were analyzed through the Index of Content Validity(CVI) and 69 items were selected which met 70% or more of the CVI. This preliminary Infertility Stress Scale were analyzed for reliability and construct validity. Item analysis and factor analysis were applied for construct validity. Forty items were selected through item analysis. This procedure was based on the inter-item correlation matrix, a corrected average inter-item correlation coefficient(.30~.70), a corrected item to total correlation coefficient (.03 or more) and information about the alpha estimate if this item was dropped from the scale. The result of the initial factor analysis including varimax rotation produced eight factors. Five items deleted because of factor complexity(indiscriminate factor loadings). The secondary factor analysis including varimax rotation produced seven factors that coincided with the conceptual framework posed for the scale developed. The seven factors were labeled as ‘meaning of children’,‘worthiness’,‘tenacious linking’,‘marital satisfaction’,‘sexual satisfaction’,‘familial adjustment’ and ‘social adjustment’. The alpha coefficient relating to internal consistency was .93 for reliability The results of this study suggest that the measurement derived from the Infertility Stress Scale is useful in assessing the stress of infertile couples.

• Journal of The Korean Association For Science Education
• /
• v.16 no.2
• /
• pp.190-199
• /
• 1996

The purpose of this study was twofold: (1) to design a system for constructing Likert attitude scales as supported by the sociopsychological and measurement literature, and (2) (using the design) to develop an affective component of "Attitudes toward Science" scale for high school students. The rationale for developing a new attitude scale is presented in the context of a review of existing attitude scales. As discussed in the literature review, many existing attitude scales are based on ill-defined theoretical constructs, and includes statements that do not appear to be assessing a single construct of attitude toward science. In addition, existing attitude scales do not distinguish between affective and behavioral and cognitive components of attitude toward science. Thus, this study was to carefully define the construct, subcomponents of attitude toward science, and develop an affective component of "Attitude toward Science" scale to reflect the construct and to distinguish between affective and behavioral and cognitive components of attitude toward science. The results of this study: (1) three-mains step for designing reliable and valid attitude scale were developed, and (2) 35 items(16 positive and 19 negative) for an affective component of "Attitudes toward Science" scale with the following characteristics were developed: (a) The internal consistency was estimated using Cronbach's coefficient ${\alpha}$, 0.9727. (b) The range of adjusted item-total correletion(${\gamma}$-value) were 0.58${\sim}$0.83. (c) The correlation coefficient ranged between 0.61 and 0.74 revealing a moderate relatedness between subcomponents. (d) The correlation coefficient for concurrent validity were 0.55 with TOSRA and 0.51 with SAl.

• Journal of Korean Academy of Nursing
• /
• v.32 no.3
• /
• pp.395-405
• /
• 2002

The purpose of this study was to develop the instrument to measure family functioning for Korean family with a chronic ill child, and to test the validity and reliability of the instrument. Method: The items of instrument were consisted based on researchers' previous study of concept analysis of the Korean family functioning. Twenty six item scale was developed with six domains. In order to test reliability and validity of the scale, data were collected from the 231 families, who have a child with a chronic illness. Data was collected between August and September in 2001 in a General Hospital in Seoul, Korea. Result: The results were as follows: As a result of the item analysis, 24 items were selected from the total of 26 items, excluding items with low correlation with total scale. Six factors were evolved by factor analysis. Six factors explained 61.4% of the total variance. The first factor 'Affective bonding' explained 15.4%, 2nd factor 'External relationship' 11.8%, 3rd factor 'Family norm' 10.5%, 4th factor 'Role and responsibilities' 8.3%, 5th factor ' Communication' 7.9%, and the 6th factor 'Financial resource' explained 7.3%. Cronbach's $\alpha$ coefficient of this scale was .87 and Guttman spilt- half coefficient was .84. Conclusion: The study support the reliability and validity of the scale. There were distinct differences in dimensions of family functioning scales developed in the U. S.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.3
• /
• pp.379-386
• /
• 2021

Objective: The purpose of this study was to systematically review the trunk impairment scale that are used to assess the trunk control of stroke patients. Design: A systematic review Methods: Stroke subjects were categorized as acute, subacute, chronic. In this systematic review, the studies published between 2000 and 2020 were selected. A literature search using the keywords 'QUADAS', 'stroke', 'trunk impairment scale'. Data sources included RISS, GOOGLE Scholar and DBpia. We assessed the quality of assessment tools using Quality Assessment of Diagnostic Accuracy Studies tool. Results: We reviewed 18 studies. 7 of the 18 studies reported reliability results, 10 reported validity results. The QUADAS tool quality evaluation of 17 literatures extracted except for one randomized control test among 18 literatures showed a range of 3 to 13 points. 5 of the 18 studies are presented with the Cronbach alpha coefficient indicating reliability using internal consistency, all of which are more than 0.8. All studies that presented test-retest reliability, intra-rater reliability, and inter-rater reliability showed high agreement with an intra-class correlation coefficient of 0.75 or more. Conclusions: A systematic review of the study of the application of the trunk impairment scale for stroke patients will help provide criteria for future studies and application of the trunk impairment scale in clinical practice.

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.300-305
• /
• 1998

In this paper, integrated pressure sensor with calibration of offset voltage and full scale output and temperature compensation of offset voltage and full scale output were designed. The signal conditioning circuitry are designed that calibrate the offset voltage and full scale output to desired values and minimize the temperature drift of offset voltage and full scale output. Designed circuits are simulated using SPICE in a bipolar technology. The ion implanted resistor of different temperature coefficient were used to trimming the desired values. As a results, offset voltage was calibrated to 0.133V and the temperature drift of offset voltage was reduced to $42\;ppm/^{\circ}C$. Also, the full scale output was calibrated to 4.65V and the temperature coefficient of full scale output was reduced to $40ppm/^{\circ}C$ after temperature compensation.

• Journal of Environmental Health Sciences
• /
• v.22 no.2
• /
• pp.90-95
• /
• 1996

This study was performed to calculate the degration rate coefficient, operating parameters to meet the effluent standards, and the temperature adjustment coefficients to each parameter of pollution by seasonal variation of concentration and temperature of influent in livestock wastewater treatment by sequencing batch reactor process in field scale. The followings are the conclusions that were derived from this study. 1. In the field, temperature of livestock wastewater in reactor was 20.3$\circ$C in summer and 6.0$\circ$C in winter. The ratio of BOD:TKN: T-P in influent was 100:80:7. BOD loadings in winter and spring were 0.26 and 0.43 kg $BOD/m^3$ day, respectively. Those in summer and fall were 0.25 and 0.13 kg $BOD/m^3$ day, respectively. 2. The degradation rate coefficient for TKN was larger in summer and fall in which temperature was high than that in which temperature was high than that in winter and spring in which concentration was high. On the contrary, the phosphorus uptake rate was larger in winter and spring than that in summer and fall. 3. The hydraulic retention time in winter and spring was longer than that in summer and fall. Especially, in order to meet the standard for TKN of 120 mg/l in winter in which temperature of wastewater was 6.0$\circ$C, as the MLSS concentration was increased from 4, 000 to 7, 000 mg/l, the hydraulic retention time was increased from 212 to 121 hours. But, in order to shorten that less than 121 hours for the economical wastewater treatment, countermeasure to increase temperature of wastewater in the reactor should be considered. 4. the temperature adjustment coefficients for BOD, $COD_{Mn}$, TKN and T-P were 1.0241, 1.0225, 1.0541 and 1.0495, respectively. Namely, the treatment of TKN was most sensitively affected by temperature. For the purpose of the effective removal of nitrogen and phosphorus which are sensitive to temperature, it is necessary to keep the temperature of livestock wastewater more than 20$\circ$C which is the temperature of it in summer.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.4
• /
• pp.51-59
• /
• 2006

In this paper, the effect of variation of density and uniformity coefficient on shear strength was analyzed from the results of large scale shear test. In addition, the friction coefficient at critical state per vertical load was estimated using the equation proposed by Wood (1998). The test sample fur the test was obtained from the local quarry sites. Tests results show that the shear strength of $2.10g/cm^3$ is relatively larger than that of $1.85g/cm^3$ and uniformity coefficient (5.0) has larger shear strength than that in 10.0. In the meantime, the friction coefficient at critical state shows $1.0{\sim}1.6$ according to the test conditions.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.380-391
• /
• 2014

In this study, the scale effect on the performance of the podded propeller of tractor type is investigated. Turbulent flow computations are carried out for Reynolds numbers increasing progressively from model scale to full scale using the CFD analysis. The result of the flow calculation for model scale Reynolds numbers agrees well with that of the experiment of a large cavitation tunnel. The existing numerical analysis indicates that the performance of the podded propeller blades is mainly influenced by the advance coefficient and relatively little by the Reynolds number. However, the drag of pod housing with propeller in operation is different from that of pod housing without propeller due to the acceleration and swirl of propeller slipstream which is altered by propeller loading as well as the pressure recovery and friction according to Reynolds number, which suggests that the pod housing drag under the condition of propeller in operation is the key factor of the scale effect on the performance between model and full scale podded propellers. The so called 'drag ratio', which is the ratio of pod housing drag to total thrust of podded propeller, increases as the advance coefficient increases due to accelerated flow in the slipstream of the podded propeller. However, the increasing rate of the drag ratio reduces continuously as the Reynolds number increases from model to full scale progressively. The contribution of hydrodynamic forces, which acts on the parts composed of the pod housing with propeller operating in various loading conditions, to the thrust and the torque of the total propeller unit are presented for a range of Reynolds numbers from model to full scales.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.411-417
• /
• 2005

Surface texturing of tribological application is another attractive technology of friction reducing. Also, reduction of friction is therefore considered to be a necessary requirement for improved efficiency of machine. In this paper attempts to investigate the effect of density for micro-scale dimple pattern using photolithography on bearing steel flat mated with pin-on-disk. We demonstrated the lubrication mechanism for a Stribeck curve, which has a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. It is found that friction coefficient is depended on the density of surface pattern. It was thus verified that micro-scale dimple could affect the friction reduction considerably under mixed and hydrodynamic lubrication conditions from based on friction map. Lubrication condition regime has an influence on the friction coefficient induced the density of micro dimple.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.2
• /
• pp.137-140
• /
• 2009

Chromated copper arsenate (CCA), a long history of successful preservative, have raised environmental concerns. Adsorption characteristics of domestic soils for chromium, copper, and arsenic were assessed by measuring distribution coefficient ($K_d$) values of these metal components in a laboratory scale. The results revealed that $K_d$ values were higher in chromium, followed by arsenic and copper in soil matrix. Different soil matrixes resulted in varying mobilities of CCA components. The values of $K_d$ for all three metals increased with organic matter contents. The results suggest that the mobility of metal components may be very limited to the surface area adjacent to CCA-treated wood due to their fairly large distribution coefficient ($K_d$). However, the metal components would be persistent and accumulated in the soil, resulting in high chemical concentration in service area of treated wood.