• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.253-256
• /
• 2000

In general, Automated Storage/Retrieval Systems (AS/RS ) have racks of equal sized cells to utilize the concept of unit-load. Most of the techniques for the performance estimation of a unit-load AS/RS are a static model or computer simulation. Especially, their models were developed under assumption that the Storage/Retrieval (S/R) machine performs only single command (SC) or dual command (DC). In reality, defending on the operating policy and the status of the system at a particular time, the S/B machine performs a SC or a DC, or becomes .: idle. In order to resolve these weak points, we propose a stochastic model for the performance estimation of unit-load AS/RS by using a single-server queueing model. Expected numbers of waiting storage and retrieval commands are found

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.921-926
• /
• 1994

The characteristics of gate oxide significantly depend on the last chemical solution used in cleaning process. The standard RCA, HF-last, SC1-last, and HF-only processes are the pre-gate oxide cleaning processes utilized in this experiment. Cleaning process was followed by thermal oxidation in oxidation furnace at $900^{\circ}C$. A 100$\AA$ gate oxide was grown and characterized with using lifetime detector, VPD AAS, SIMS, TEM, and AFM. The results of HF-last and HF-only were shown to be very effective to remove the metallic impurities. And these two splits also showed long minority carrier lifetimes. The surface and interface morphologies of the oxide were examined with AFM and TEM. The rough surface morphologies were observed with the cleaning splits containing the SC1 solution. The smooth surface and interface was observed with the HF-only cleaning process.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.88-99
• /
• 2017

This study investigated the clinical characteristics of the Internet addiction risk group using MMPI-2 and discussed whether the MMPI-2 can be used for diagnosis, evaluation and intervention of the Internet addiction risk group. We verified the difference in the MMPI-2 scales between the addiction-risk group and the general user group, and verified whether the substance-related scales MAC-R, AAP, and AAS scales can distinguish between Internet addiction risk group and general users. The results of the analysis of the MMPI-2 characteristics of 39 Internet addiction risk group and 21 general user group who visited internet addiction counseling center showed significant difference in the D, Pa, Pt, Sc, and Si scales on the clinical scale. There was no difference in the MAC-R, AAS, and APS scales between the Internet addiction group and the general user group. This suggests, that it is not possible to screen the Internet addiction risk group with the supplementary measure, and it is necessary to develop a new scale to diagnose internet addiction.

• The Journal of the Korea Contents Association
• /
• v.16 no.4
• /
• pp.655-665
• /
• 2016

This research was conducted to verify the relationships among clinical scale of MMPI-2, Internet Addiction, and Smartphone Addiction. Participants were 190 college students(male: 95, female: 95) in an university in Seoul. Data were processed SPSS 22.0, using ANOVA, Pearson's correlation coefficient, and logistic regression analysis. As a result of analysis, first, MMPI-2 clinical scales which showed significant differences between a higher risk group of internet addiction and a non-higher risk group as follows: Hs, D, Pd, Pt, Sc, Si. Second, MMPI-2 clinical scales which showed significant differences between a higher risk group of smartphone addiction and a non-higher risk group as follows: Hs, Pa, Pt, Sc. Third, Logistic regression analysis revealed that Hs and Si among clinical scales of MMPI-2 were associated with internet addiction. Firth, Hs and Si among clinical scales of MMPI-2 were associated with smartphone addiction. Based on the results some implications and importances of mental health are discussed for reducing internet and smartphone addiction of college students.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.3
• /
• pp.112-131
• /
• 2011

This article reports the results of scientific analysis using SEM-EDX, XRD, TG/DTA, performed on 5 green glaze samples of the brick and roofing tile excavated from the Sacheonwang temple site in Gyeongju in order to verify the chemical compositions and melting temperature. The glaze samples on 2 clay statues have similar chemical composition (PbO 74~81%, $SiO_2$ 14~18%) and melting temperature range ($970{\sim}1070^{\circ}C$), whereas the 2 tiles of goblin's face and 1 rhomb brick have different characteristics. Sample SC 003 (made of PbO 63~67%, $SiO_2$ 25~28%), one of the tiles of goblin's face, shows low melting temperature range (below $970^{\circ}C$), and sample SC 004 (composed of PbO 64~70%, $SiO_2$ 19~25% and melting point $970{\sim}1070^{\circ}C$), the other tile of goblin's face, shows different chemical characteristics compared with 2 clay statues. The green glaze on rhomb brick shows different composition compared with all the others from Sacheonwang temple site in that it does not show any impurity elements other than the main components (PbO 87~88%, $SiO_2$ 12~13%) with very low melting temperature range ($750{\sim}770^{\circ}C$). Surprizingly, the chemical and optical characteristics of this green-glaze on rhomb brick are very similar to that on the bricks from Yeongmyo temple site, Gyeongju. The above results indicate that raw material and manufacturing method are not same for 5 green-glaze samples from Sacheonwang temple site and therefore suggests that further study on the provenance of raw material such as lead isotope analysis is necessary. Our work will provide basic data for future reproduction study of green glazed brick of Sacheonwang temple site, Gyeongju and will also serve as a reference data for the study of raw material and manufacturing method of green glaze from other sites of cultural assets.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.183-186
• /
• 1990

The lattice mismatch between ZnS and Si is negligible because of its value being 0.39%. In this study, $ZnS/_{(P)}Si$ solar cell were fabricated as a layer of ZnS is epitaxially grown on a silicon substrate by PVD method and its photovoltaic properties were measured and discussed. The heat treatment was done after deposition. As the temperature increased up to a certain value, the film has better perfection in crystal structure and electrical characteristics. Measurments of the change that occur in the ZnS films were made by SEM., X-ray diffraction. The optimal thickness of film showned $0.6{\mu}m$, being measured by SEM. The great improvement of the grain growth ZnS film came out after heat-treatment. The result obtained from the $ZnS/_{(P)}Si$ solar cell as follows:short circuit current; $I_{sc}=54mA/cm^2$,open voltage; $V_{oc}=400mV$, fill factor FF=0.72, conversion efficiency; ${\eta}=15.6%$ under the irradiation of 100 ($mW/cm^2$) focused by solar energy. And these are discussed in comparison with other kinds.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.63.2-63.2
• /
• 2010

삼중접합 태양전지에 상부전지로 이용되는 a-SiO:H 태양전지는 PECVD(Plasma Enhanced Chemical Vapour Deposition)을 이용하여 증착하였다. i a-SiO:H는 $CO_2/SiH_4$ 비율을 변화하여 밴드갭을 조절하였다. $CO_2/SiH_4$가 0에서 0.43으로 증가 할수록 밴드갭이 1.74 eV에서 1.94 eV로 증가하는 경향을 보였다. 이는 FTIR에서 나타난 결과인 Si-O-Si 결합의 증가 때문인 것으로 판단한다. 그에 반해서 광 전도도는 감소하는 경향을 보였다.그러나 암전도도와 광전도도의 비율인 광민감도는 $10^5$에서 $10^4$의 값으로 비정질 태양전지에 적용가능한 값을 보였다. 이러한 박막 특성을 가진 i a-SiO:H를 이용하여 비정질 실리콘 태양전지를 제작한 결과 $CO_2/SiH_4$의 비율이 증가함에 따라 태양전지의 $V_{oc}$가 0.8 V에서 0.5 V로 현저하게 감소하였고, $J_{sc}$와 FF 역시 11 $mA/cm^2$에서 4 $mA/cm^2$, 69%에서 50%로 감소하였다. 단위박막 결함을 측정하는 CPM(Constant Photocurrent Method)을 이용하여 i a-SiO:H 내부에 $10^{16}cm^{-3}$ 정도의 내부 결함을 관찰하였고 이는 태양전지의 특성 감소와 관련이 있는 것으로 판단한다.

• Journal of Sasang Constitutional Medicine
• /
• v.31 no.2
• /
• pp.1-11
• /
• 2019

Background Sasang constitutional medicine explains that the difference in eating habits depending on constitutional characteristics affects health status. The aim of the present study is to investigate research trend on Sasang constitution (SC) and eating habits. Method Research papers from 2010 to 2019 on SC and eating habits were searched in domestic and international 5 databases. As a result, 11 clinical studies related to the SC and eating habits were finally selected. From the finally selected research papers, subjects, study period, constitutional diagnostic tools used for studies, and eating habit evaluation tools were investigated. Results In a total of 11 research papers conducted as clinical studies regarding SC and eating habits for the recent 20 years, eating speed and meal size items were most frequently used, followed by the regularity of meals, unbalanced diets, breakfast. Taeumin was more likely to eat fast, eat a lot of food, or overeat while Soeumin was less likely to overeat or they eat less food. There was no significant difference in the regularity of meals depending on constitution, but each study showed different tendency. Conclusion This study closely reviewed Sasang constitutional eating habit items from the precedent studies to select the major items of eating habits as a constitutional health management index. The results of this study will contribute to selections of items and the development of tools to measure constitutional eating habits related to health status.

• Clean Technology
• /
• v.16 no.3
• /
• pp.191-197
• /
• 2010

Repair reaction of plasma damaged porous methyl doped SiOCH films was carried out with silylation agents dissolved in supercritical carbon dioxide ($scCO_2$) at various reaction time, pressure, and temperature. While a decrease in the characteristic bands at $3150{\sim}3560cm^{-1}$ was detectable, the difference of methyl peaks was not identified apparently in the FT-IR spectra. The surface hydrophobicity was rapidly recovered by the silylation. In order to induce effective repair in bulk phase, the wafer was heat treated before reaction under vacuum or ambient condition. The contact angle was slightly increased after the treatment and completely recovered after the subsequent silylation. Methyl groups were decreased after the plasma damage, but their recovery was not identified apparently from the FT-IR, spectroscopic ellipsometry, and secondary ion mass spectroscopy analyses. Furthermore, Ti evaporator was performed in a vacuum chamber to evaluate the pore sealing effect. The GDS analysis revealed that the open pores in the plasma damaged films were efficiently sealed with the silylation in $scCO_2$.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1277-1279
• /
• 1994

In the structure of ZnO/nip-SiC: H/metal substrate amorphous silicon (a-Si:H) solar cells, the effects of inserting a rear textured ZnO in the p-SiC:H/metal interface and a graded bandgap buffer layer in the i/p-SiC:H have been analysed by computer simulation. The incident light was taken to have an intensity of $100mW/cm^2$(AM-1). The thickness of the a-Si:H n, ${\delta}$-doped a-SiC:H p, and buffer layers was assumed to be $200{\AA},\;66{\AA}$, and $80{\AA}$, respectively. The scattering coefficients of the front and back ZnO were taken to be 0.2 and 0.7, respectively. Inserting the rear buffer layer significantly increases the open circuit voltage($V_{oc}$) due to reduction of the i/p interface recombination rate. The use of textured ZnO markedly improves collection efficiency in the long wavelengths( above ${\sim}550nm$ ) by back scattering and light confinement effects, resulting in dramatic enhancement of the short circuit current density($J_{sc}$). By using the rear buffer and textured ZnO, the i-layer thickness of the ceil for obtaining the maximum efficiency becomes thinner(${\sim}2500{\AA}$). From these results, it is concluded that the use of textured ZnO and buffer layer at the backside of the ceil is very effective for enhancing the conversion efficiency and reducing the degradation of a-Si:H pin-type solar cells.