• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.54-61
• /
• 2012

Makgeolli lees is a by-product of the makgeolli brew processing. Makgeolli lees contains high levels of fibers, which can be separated and used to develop foods rich in dietary fibers. The purpose of this study was to determine the effect of makgeolli fibers (0-4%) on proximate composition, caloric content, pH, color, cooking yield, textural profile, and sensory characteristics of chicken-emulsion sausages. The moisture content of 1, 2, and 3% makgeolli lees fiber-amended product was higher than the control, while that of the 4% product was not. Total calorie estimates of makgeolli lees fiber-amended sausages were lower than the control, except for in the case of the 4% treatment. Moreover, chicken sausages supplemented with makgeolli lees fiber had higher cooking yields and improved textural properties. Chicken emulsion sausages prepared with makgeolli lees fiber had improved overall acceptability, and the best results of sensory characteristics were obtained for the emulsion sausages containing 2% makgeolli lees fiber.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.361-366
• /
• 2004

Physicochemical and textural properties, and sensory evaluation of low-fat sausages (LFSs) manufactured with 0.3 and 0.6％ chitosan were investigated and compared with those of regular-fat sausages (RFSs). Although the batter pH was not changed with the addition of chitosan (p>0.05), product pH was reduced (p>0.05) with the addition of chitosan up to 0.6％. Proximate composition and cooking loss (％) were not affected by the addition of chitosan. Expressible moisture 1r91ues (EM, ％) of LESs were lower (p<0.05) than those of RFSs, but not affected by the addition of chitosan. The addition of chitosan in the sausage formulation became harder, springier and more cohesive (p<0.05), whereas, no differences were observed (p>0.05) in these values of sausages containing between 0.3 and 0.6％. Batter viscosity was not affected by the addition of chitosan, but LESs with or without chitosan had lower viscosity than RFSs due to high moisture (％). Sensory evaluation results showed that LFSs containing 0.3％ chitosan had most parameters similar to those of low-fat control. These results indicated that chitosan at the level of 0.3％ can be used for the manufacture of LFSs without quality defect.

• Food Science of Animal Resources
• /
• v.43 no.1
• /
• pp.1-9
• /
• 2023

The expansion and advancement of the meat product market have increased the demand for fermented sausages. A typical method for manufacturing high-quality fermented sausages is using a starter culture, which improves the taste, aroma, and texture. Currently, the starter culture for manufacturing fermented sausages is mainly composed of microorganisms such as lactic acid bacteria, yeast, and fungi, which generate volatile compounds by the oxidation of fatty acids. In addition, protein decomposition and changes in pH occur during the fermentation period. It can positively change the texture of the fermented sausage. In this review, we discuss the requirements (improving food safety, the safety of starter culture, enzyme activity, and color) of microorganisms used in starter cultures and the generation of flavor compounds (heptanal, octanal, nonanal, hexanal, 2-pentylfuran, 1-penten-3-ol, and 2-pentanone) from lipids. Furthermore, quality improvement (hardness and chewiness) due to texture changes after starter culture application during the manufacturing process are discussed.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.121-131
• /
• 2009

This study attempted to investigate the perception and usage status for meat products of dietitians in the food service business in Seoul and Gangwon province. 32.8% of dietitians decided the menu reflecting the taste of students. Most of the dietitians (89.2%) checked the manufacture date of the processed meat products when they were supplied. To address the question as to whether they could distinguish the difference among ham, pressed ham, and sausage, most of them answered; 'can distinguish a little' (47.5%) or 'can't distinguish' (36.7%). The most frequently provided processed meat products were ham (33.9%), followed by sausage (21.7%). However, it is assumed that the dietitians might have mistaken the pressed ham for the classic ham. The most common frequency of the serving processed meat product in the food services was once a month (41.6%). Most desired aspect of quality improvement for the processed meat products was answered as 'hygiene/safety' (31.5%), and followed by 'higher quality' (26%). In conclusion, the improvement of the product quality and the strengthening of public information would be prerequisites for expanding the use of processed meat products in the food services and business-to-business (B2B) market in the future.

• 한국유가공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.531-537
• /
• 2007

Small amounts of trans fatty acids exist naturally in beef and dairy foods. Also, they can be produced in the process of partial hydrogenation to manufacture shortning or margarine. They can provide a better palatability and shelf life. According to the recently studies, trans fatty acids can raise health risk such as heart diseases and coronary artery diseases. They can also increase low-density lipoprotein (LDL) cholesterol and decrease high-density lipoprotein (HDL) cholesterol in the blood plasma, therefore increasing the risk of atherosclerosis and diabetes. The aim of this study was to determine total lipids and trans fatty acids (TFAs) content in processed foods and meat products. The analysis of trans fatty acids was performed in 28 samples of donuts, 18 samples of bakeries, 4 samples of frozen doughs, 2 samples of popcorns, and 4 samples of meat products (ham, sausage, nuget, and bacon). Total lipids in processed foods and meat products were extracted by chloroform-Methanol method and acid digestion, respectively. They were analyzed by gas chromatography using a SP-2560 column and flame ionization detector. The amounts of TFAs per 100 g of foods were 0-3.3% (0.74% on average) in donuts, 0.2-5.8% (1.18% on average) in bakeries, 0.2-6.3% (1.93% on average) in frozen doughs, and 0-5.8% in popcorns. Meat products such as ham, sausage, and nuget analyzed 0.1% of TFAs, respectively and trans fatty acids in bacon were not detected. As a result, the distribution of TFAs in processed foods was widely ranged from O% to 6.3% according to manufacturers and types of products, whereas the content of TFAs in meat products ranged from 0% to 0.1%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.4
• /
• pp.551-556
• /
• 2016

This study was conducted to investigate the effects of NaCl concentration on the physicochemical properties of pork emulsion. Pork emulsion was produced containing 0% (control), 0.3%, 0.6%, 0.9%, 1.2%, and 1.5% NaCl. Proximate composition of pork emulsion containing 1.5% NaCl showed the highest moisture content (P<0.05). The ash contents of pork emulsion increased with an increase in NaCl, and protein contents decreased with increasing NaCl concentration. The pH levels of uncooked pork emulsion containing 0.9%, 1.2%, and 1.5% NaCl were lower than those of other treatments (P<0.05), and the pH level of cooked pork emulsion containing NaCl was lower than that of the control (P<0.05). The CIE $L^*$ value of the uncooked pork emulsion samples containing NaCl was higher than that of the control (P<0.05), whereas CIE $a^*$ and CIE $b^*$ values of samples with NaCl were lower than the control (P<0.05). CIE $L^*$ and CIE $b^*$ values of cooked pork emulsion decreased with an increase in NaCl level, and CIE $a^*$ value increased with increasing NaCl concentration (P<0.05). Viscosity of the pork emulsion increased with an increase in NaCl. Texture profile analysis of pork emulsion containing NaCl showed no significant difference in springiness or cohesiveness (P>0.05). Pork emulsion containing 1.5% NaCl showed the highest hardness, gumminess, and chewiness (P<0.05). These results suggest that pork emulsion containing 0.9% and 1.2% NaCl can be used as a low-salt meat product.