• 전기학회논문지
• /
• 제58권5호
• /
• pp.879-884
• /
• 2009

A Method for detection of saturation of a current transformer(CT) is proposed. The algorithm is initiated when the end point of a saturation period is detected. This detection is achieved by checking the time interval between the adjacent zero-crossing points of the second derivative of the secondary current. Once the end point of the saturation period is detected, the beginning point of the corresponding saturation period is determined by backward examination of the sum of the secondary current from the end point. The performance of the algorithm was evaluated for a-g faults on a 345 kV 100km overhead transmission line. The Electromagnetic Transient Program(EMTP) was used to generate fault current signals for different fault inception angles and different remanent fluxes. The performance evaluation shows that the proposed algorithm successfully detects the saturation period even in the presence of a remanent flux.

• 한국약용작물학회지
• /
• 제9권3호
• /
• pp.232-237
• /
• 2001

본 연구는 야콘의 광합성 효율증진을 위한 기상환경 조건을 규명하여 재배적지의 선정과 재배관리에 대한 기초적 자료를 제공하고자 광도와 온도, 그리고 $CO_2$의 농도에 대한 광합성과 증산량을 조사하였다. 광 보상점은 ${58\;{\mu}mol\;m^{-2}\;s^{-1}}$이었고, 포화점은 ${1708\;{\mu}mol\;m^{-2}\;s^{-1}}$이었다, 증산량은 광도가 증가할수록 높아져 광도 ${2193\;{\mu}mol\;m^{-2}\;s^{-1}}$에서 약 4 mmol ${m^{-2}\;s^{-1}}$간에 이르렀다. 광합성의 최적온도는 ${24^{\circ}C}$였으며, 온도의 변화에 의하여 증산량이 4 mmol ${m^{-2}\;s^{-1}}$에서 8 mmol ${m^{-2}\;s^{-1}}$까지 증가하였을 때 광합성은 오히려 감소하는 경향이었다. 이산화탄소 보상점은 63 mol mol ${m^{-2}\;s^{-1}}$이었고, 포화점은 1155 vpm이었으며, 이산화탄소 농도가 350vpm에서 1300vpm까지 증가함에 따라 광포화점은 높아졌다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.752-760
• /
• 2018

In this paper, interior permanent magnet synchronous motor (IPMSM) design for sensorless drive, considering magnetic neutral point shift according to magnetic saturation, has been proposed. Sensorless control was divided into a method based on inductance and a method based on back induced voltage. Because induced voltage is very small at zero or low speed, error in rotor initial position estimation may occur. Using the ratio of saliency addresses this problem. When using high-frequency injections at low speed, the rotor's initial position is estimated at the smallest portion of the inductance. IPMSM has the minimum inductance at the d-axis. However, if magnetic saturation leads to magnetic neutral point variation, following the load current change, there is a change in the minimum point of inductance. In this case, it can lead to failure of initial rotor position estimation. As a result, it is essential that the blocking design has an inductance minimum point shift. As such, in this study, an IPMSM design method, by blocking magnetic neutral point change, has been proposed. After determining the inductance profile based on the finite element analysis (FEA), the results of proposed method were verified.

• 한국통신학회논문지
• /
• 제31권6A호
• /
• pp.593-602
• /
• 2006

본 논문에서는 IEEE 802.16e에 기반한 OFDMA TDD 시스템 하향 링크 트래픽 채널의 fixed-point 구현을 위해 Floating-point 모델로부터 성능 열화와 하드웨어 복잡도를 최소화 할 수 있도록 적절한 비트 사이즈를 결정하는 방법론에 대하여 기술한다. Fixed-point 구현에 있어서 여러 가지 고려 사항 중 하나는 비트 사이즈를 절사하는 방법에 따른 Saturation과 Quantization의 선택이며, 반드시 주의해야 할 점은 신호의 분포를 정확히 파악한 후 신호의 분포에 맞도록 Saturation과 Quantization 중 하나의 비트 절사방법을 적절히 적용시켜야 한다는 점이다. 또한, 시행착오를 거치면서 여러 비트 사이즈에 대하여 모의 실험을 수행하여야만 성능 열화를 최소화 하면서 원하는 비트 사이즈를 얻을 수 있다. 본 논문에서는 수신단의 트래픽 채널에 최적화된 비트 사이즈를 결정하기 위하여 AWGN 및 ITU-R M.1225의 Veh-A 채널 환경에서 컴퓨터 모의 실험을 수행한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전력기술부문
• /
• pp.88-90
• /
• 2003

In this paper, an algorithm to compensate the distorted signals due to CT(Current Transformer) saturation is suggested. Firstly, WT(Wavelet Transform) is used to detect a start point and an end point of saturation. Filter banks which can be easily realized in real-time applications are employed in detecting CT saturation. Secondly, least-square curve fitting method is used to restore the distorted section of the secondary current. Fault simulations are performed on a power system model using EMTP(Electromagnetic Transient Program). A series of test results indicate that WT has superior detection accuracy and the proposed algorithm which shows very stable features under various levels of remanent flux is also satisfactory.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.96-98
• /
• 2005

In this paper, an algorithm to compensate the distorted signals due to Current Transformer(CT) saturation is suggested, First, DWT which can be easily realized by filter banks in real-time applications is used to detect a start point and an end point of the saturation. Secondly, For enough Datas those need to use the least-square curve fitting method, the distorted current signal is compensated by the AR(autoregressive) model using the data during the previous healthy section until pick point of Saturation. Thirdly, the least-square curve fitting method is used to restore the distorted section of the secondary current. Finaly, this algorithm had a Hadware test using DSP board(TMS320C32) with Doble test device. DWT has superior detection accuracy and the proposed compensation algorithm which shows very stable features under various levels of remanent flux in the CT core is also satisfactory. And this algorithm is more correct than a previous algorithm which is only using the LSQ fitting method. Also it can be used as a MU involving the compensation function that acquires the second data from CT and PT.

• 한국약용작물학회지
• /
• 제10권1호
• /
• pp.1-4
• /
• 2002

본 연구는 헛개나무의 광합성 효율증진을 위한 기상환경 조건을 규명하여 재배적지의 선정과 재배관리에 대한 기초적 자료를 제공하고자 광도와 온도, 그리고 $CO_2$의 농도에 대한 광합성과 증산량을 조사하였다. 광 보상점은 $2.4\;{\mu}mol\;m^{-2}\;s^{-1}$이었고, 포화점은 $1033\;{\mu}mol\;m^{-2}\;s^{-1}$이었다. 광도 $100\;{\mu}mol\;m^{-2}\;s^{-1}$에서 광합성의 최적온도는 $25^{\circ}C$이었다. 이산화탄소 보상점은 67 vpm이었고, 포화점은 707 vpm이었다. 증산량은 광도가 $1750\;{\mu}mol\;m^{-2}\;s^{-1}$까지 그리고 온도가 $18^{\circ}C$에서 $36^{\circ}C$까지 높아질수록 $2\;mmol\;m^{-2}\;s^{-1}$와 $4\;mmol\;m^{-2}\;s^{-1}$정도로 각각 증가하였으나 이산화탄소 농도가 21 vpm에서 800 vpm으로 높아질 때는 감소하는 경향이었다.

• Child Health Nursing Research
• /
• 제13권3호
• /
• pp.299-307
• /
• 2007

Purpose: To investigate the effect of nonnutritive sucking(NNS) on the heart rate, oxygen saturation, and behavioral state of premature infants. Method: From December 15, 2004 to February 15, 2005, 20 premature infants hospitalized in the neonatal intensive care units were assigned to an experimental group (10), or a control group (10). Circular pacifiers for premature infants (Johnson, U.S.A.), which had been packed with $2{\times}2$ gauzes to create a vacuum, were used for 5 minutes, one hour after feeding for 5 days. Heart rates and oxygen saturation were checked every minute for 10 minutes once a day and behavioral states were monitored through video recording at the same time. Results: Changes in heart rate, oxygen saturation and behavioral state were found to show significant differences between the experimental group and the control group according to the point in time, and interactions were found between the group and the point of time. However, for behavioral state, no significant difference was found between the experimental group and the control group after the NNS was removed. Conclusion: From the results of this study it is possible to conclude that NNS is a positive intervention to bring about increased oxygen saturation and soothed behavioral state for premature infants.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.326-328
• /
• 2009

we an autotuning algorithm for PI controller with unknown plant. The proposed algorithm uses a saturation function and time delay element as a test signal. Since the integral element of PI controller reduces a phase margin and amplitude margin in the closed loop system, the closed loop system could be resulted in unstable with PI controller, To avoid unstable in the closed loop system with PI controller, the proposed algorithm identifies one point information in the 3rd quadrant of Nyquist plot with a time delay element. The proposed method improves an accuracy of one point identified information with one saturation function.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.193-197
• /
• 2007

We use a saturation function with memory instead of a pure saturation function to generate a limit cycle in order to find one point information of a plant in the frequency domain. The saturation function with memory is useful in the presence of noise and/or a short duration of short duration of external disturbances. We analyze the error caused by the approximation that the saturation function with memory treated as a pure saturation function. We propose a new tuning formula for PID controller which can be applied a saturation function having memory with an arbitrary memory size. We show that the proposed method is more accurate than that of the approximation method via an example.