• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.922-926
• /
• 2005

Progressively censored variables sampling plans are proposed for the lot acceptance of parts whose life follows Weibull distribution with known shape parameter. Progressive type-II censoring gives us not only time to failure but also degradation information. So, one can construct more flexible and more cost effective sampling plans. Design parameters of our sampling plan are determined by using the usual two-point approach.

• 전기의세계
• /
• 제25권6호
• /
• pp.89-96
• /
• 1976

In this paper we deal with that the performance indices by the three adaptive sampling control laws are computed and compared. It shows that the most effective control law is the integral input difference method. The techniques of simulation by Analog/Hybrid computer are presented and the results of the output illustrate that the maximum and minimum sampling interval can be applied to the time sharing of digital controller or computer.

• Communications for Statistical Applications and Methods
• /
• 제12권1호
• /
• pp.11-18
• /
• 2005

Assume that the life times of the units under test follow the Rayleigh distribution and the test is terminated at a pre assigned time. Acceptance sampling plans are developed for this situation. The minimum sample size necessary to ensure the specified average life are obtained and the operating characteristic values of the sampling plans and producer's risk are given. An example is given to illustrate the methodology.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.286-289
• /
• 1996

Two servo control algorithms are suggested to reduce the tracking error of a computer hard disk drive. One is the repetitive control to reduce the repeatable tracking error which is not explicitly taken into account in the design of a conventional controller. This algorithm was successfully applied to a commercial disk using a fixed point DSP. The other is the multi-rate sampling control which generates the control output between each sampling times since the sampling time of hard disk drives is limited. These algorithms were shown effectively to reduce tracking errors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.46.4-46
• /
• 2002

This study was motivated how it might be possible to validate structured sampling with orthogonal array for optimal design of a pin. The Taguchi method by orthogonal array, one of the structured sampling methods, has much advantage that is row cost and time saving for experiments. But this method has been applied in limited areas especially for mechanical problems. In this study, we experimented whether the structured sampling is useful for applying optimal design of mechanical elements. For the experiment, we first set up a mechanical problem which was related to determining optimal parameters associated a pin's crack occurred inside a hole. We, then, calculated combination of...

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.827-830
• /
• 2003

This paper proposes an area-efficient FIR filter architecture for sampling rate conversion of hi-fi audio data. Sampling rate conversion(SRC) block converts audio data sampled at 96KHz down to 48KHz sampled data and vice versa. 63-tap FIR filter coefficients have been synthesized that gives 100dB stop band attenuation and 5.2KHz transition bandwidth. Time-shared filter architecture requires only one multiplier and accumulator for 63-tap filter operation. This results in huge hardware saving of up to 10~19 times smaller compared with traditional FIR structure.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.87-92
• /
• 1988

In this paper, a new focusing method, to be called the pipelined sampled delay focusing (PSDF), is implemented. This method improves the lateral resolution in ultrasound imaging system. In PSDF, the analog belay lines are no longer necessary because sampling sum process can replace the conventional delay sum process. Also, the method offers continuous dynamic focusing on the resolution pixel basis, and eliminates the constraint that the maximum delay time is less than the sampling interval. Second order sampling is adopted in order to extend the sampling interval.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.145-151
• /
• 2004

Reliability assurance problem is an important issue in advanced company with good R&D capacity. In Korea, long-term and large-scale project for reliability improvement and certification have been conducted from 2000, 4 years ago. Generally, assurance is composed of system assurance and lot assurance. For reliability lot assurance. it is prerequisite to development reliability sampling plan with time-saving and minimum cost. In this paper, we aim to investigate previous study on reliability lot assurance focused on reliability sampling plans and propose some suggestions for the future study.

• International Journal of Safety
• /
• 제3권1호
• /
• pp.27-31
• /
• 2004

Some of the petroleum products contain benzene which is well known as a confirmed human carcinogen. For example, gasoline products contain benzene ranging up to several percents by weight. High exposures to the benzene and other organic solvents would be likely to occur during intermittent tasks and or processes rather than continuous jobs such as sampling, repair, inspection, and loading/unloading jobs. The work time for these jobs is various. However, most of work time is very short and the representative time interval is 15 minutes. Thus, it is preferable to do exposure assessment for 15 minute time weighted average which is known as a short time exposure level(STEL) by ACGIH rather than for 8-hours TWA. It is particularly significant to the exposure monitoring for benzene since it has been known that the exposure rate plays an important role to provoke the leukemia. Due to the large variations, a number of processes/tasks, the traditional sampling technique for organic solvents with the use of the charcoal and sampling pumps is not appropriate. Limited number of samples can be obtained due to the shortage of sampling pumps. Passive samplers can eliminate these limitations. However, low sampling rates resulted in collection of small amount of the target analysts in the passive samplers. This is originated the nature of passive samplers. Field applications were made with use of passive samplers to compare with the charcoal tube methods for 15 minutes. Gasoline loading processes to the tank lorry trucks at the loading stations in the petroleum products storage area. Good agreements between the results of passive samplers and those of the charcoal tubes were achieved. However, it was found that special cautions were necessary during the analysis at very low concentration levels.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.178-185
• /
• 2020

본 논문에서는 미래 LAN 기반 디지털 변전소 보호를 위하여 정밀 시각동기 기반 동기 샘플링 구조를 적용한 계통 구성 IED(Intelligent Electronic Device)의 HW/SW 플랫폼을 제안하였다. 제안한 플랫폼은 전력계통 자동화를 위한 표준인 IEC 61850 프로토콜 및 IED 간 정밀 시각동기를 위한 IEEE 1588 Precision time protocol 통합 소프트웨어가 적용되었으며, Synchronized reference signal을 이용한 IED 간 동기 샘플링 구조를 적용하였다. 이는 미래 IEC 61850 기반 디지털 변전소에 적용될 네트워크 기반 데이터 송수신 환경에서 IED 간 동기 측정된 계전 데이터를 제공하게 함으로써, 네트워크 기반 분산 측정 데이터를 이용한 새로운 보호 및 제어방식을 적용할 수 있는 토대를 제공할 것으로 기대된다. 제시한 플랫폼 기술의 타당성 및 성능을 측정하기 위하여 TMDXIDK572 멀티코어/멀티프로세서 EVM(Evaluation Module)을 기반으로 구현하였으며, 성능 시험 환경을 구성하여 제시한 플랫폼의 시각동기 성능 및 동기 샘플링 기능의 동작을 확인하였다.