• 한국산업보건학회지
• /
• 제24권2호
• /
• pp.193-200
• /
• 2014

Objectives: To develop domestic charcoal tubes with good adsorption capacity, breakthrough experiments were performed on four types of activated charcoal. Materials: The adsorption capacity and the adsorption rate were determined using a modified Wheeler equation after the breakthrough experiment. For four types of charcoal (J, K, S and SKC Inc. 226-01), 100 mg were used in the breakthrough experiment. The test was done on benzene, toluene, n-hexane, and acetone in a dynamic chamber. Results: K charcoal had the greatest surface area and the highest micropore volume. J charcoal had a similar surface area and micropore volume to SKC charcoal. S charcoal had the lowest surface area and micropore volume. J charcoal had the highest adsorption capacity at 101, 252 and 609 ppm of benzene. The gap in benzene adsorption capacity among the types of charcoal was the least at 609 ppm and the greatest at 101 ppm. J charcoal showed the highest adsorption capacity at 54, 106, 228 and 508 ppm of toluene. J charcoal and SKC charcoal had a similar adsorption capacity for acetone. J charcoal had the highest adsorption capacity for n-hexane. In the experiment featuring 10% breakthrough volume, 10% breakthrough occurred at 18 liters at $2065.9mg/m^3$ for J charcoal and at 20 liters at $1771.2mg/m^3$ for K charcoal. It was difficult to judge adsorption capacity by surface area and micropore volume of charcoal. J charcoal, which was similar to SKC charcoal in surface area and micropore volume, showed good adsorption capacity at common workplace concentrations. Conclusions: The adsorption capacity of J and K charcoal was superior compared with SKC charcoal. J and K charcoal can be considered appropriate for use as sampling media based on this result.

• 한국인터넷방송통신학회논문지
• /
• 제10권4호
• /
• pp.145-150
• /
• 2010

본 논문에서는 스펙트럼 효율 향상을 위한 부가 데이터 전송 시스템을 제안하고 채널용량 식을 근사화 하여 유도 한다. 대역확산 워터마킹 기법이 워터마킹 신호 삽입기로 이용되었고 다중경로 채널로는 나카가미-q (Hoyt) 모델을 고려하였다. 수식적 결과는 무선 페이딩 채널에서 제안된 시스템의 채널 용량 변화를 보여준다. 결과로부터 워터마킹 시스템의 채널용량이 페이딩 계수와 호스트 샘플링 주파수, 호스트-워터마킹 전력비, 워터마킹-잡음 전력비 및 확산코드 길이에 의해서 영향 받음을 확인한다.

• 수산해양기술연구
• /
• 제54권3호
• /
• pp.217-223
• /
• 2018

Overfishing capacity has become a global issue due to over-exploitation of fisheries resources, which result from excessive fishing intensity since the 1980s. In the case of Korea, the fishing effort has been quantified and used as an quantified index of fishing intensity. Fisheries resources of coastal fisheries in the Korean waters of the East Sea tend to decrease productivity due to deterioration in the quality of ecosystem, which result from the excessive overfishing activities according to the development of fishing gear and engine performance of vessels. In order to manage sustainable and reasonable fisheries resources, it is important to understand the fluctuation of biomass and predict the future biomass. Therefore, in this study, we forecasted biomass in the Korean waters of the East Sea for the next two decades (2017~2036) according to the changes in fishing intensity using four fishing effort scenarios; $f_{current}$, $f_{PY}$, $0.5{\times}f_{current}$ and $1.5{\times}f_{current}$. For forecasting biomass in the Korean waters of the East Sea, parameters such as exploitable carrying capacity (ECC), intrinsic rate of natural increase (r) and catchability (q) estimated by maximum entropy (ME) model was utilized and logistic function was used. In addition, coefficient of variation (CV) by the Jackknife re-sampling method was used for estimation of coefficient of variation about exploitable carrying capacity ($CV_{ECC}$). As a result, future biomass can be fluctuated below the $B_{PY}$ level when the current level of fishing effort in 2016 maintains. The results of this study are expected to be utilized as useful data to suggest direction of establishment of fisheries resources management plan for sustainable use of fisheries resources in the future.

• 한국습지학회지
• /
• 제3권1호
• /
• pp.61-73
• /
• 2001

This study was performed to survey the characteristics of surface water and soil in Wangdungjae wetland located at Chiri-Mountain. The results of survey summarized as follows; 1. The physico-chemical characteristics of surface water such as pH, temperature, and DO were in the range of 6.02-6.39, $13.5-24.3^{\circ}C$ and 3.81-9.97 mg/L, respectively. Also, the organic concentrations such as BOD and COD were in the range of 1.3-1.61 mg/L and 3.55-9.97 mg/L, respectively. The water quality of five different sampling sites showed the similar characteristics. 2. The physico- chemical characteristics of soil showed the different properties with the soil sampling depth. According to increasing sampling depth, cation exchange capacity (CEC) and electric conductivity (EC) increased but pH decreased. 3. The future survey and researches on surface water and soil environments are needed to preserve the Wangdungjae wetland at Chiri-mountain marsh.

• 대한교통학회지
• /
• 제23권3호
• /
• pp.137-147
• /
• 2005

본 연구의 목적은 연속류의 미시적 행태분석을 통해 새로운 용량개념을 정의하고 이에 대한 용량 산정방법을 개발하고 제안하는데 있다. 교통자료 검지체계의 기술적 발전은 기존 미국 도로용량편람에서 활용된 자료에 비해 정확하고 많은 자료의 수집을 가능하게 하고, 이에 따라 교통류 해석에 대한 다양한 학문적 접근이 시도되면서 기존도로용량의 정의와 산정기준의 한계점이 드러나고 있다. 대안적 용량개념은 교통류-밀도 관계에서 용량감소와 이력현상을 포함한 혼잡교통류의 특징을 포괄적으로 해석하려는 시도로써, 확률적 모형과 행태적 또는 역학적 모형으로 구분할 수 있다. 그러나 대안적 용량개념으로 제안된 두 가지 모형 역시 연속류의 다양한 상태와 상태변동을 설명하기에는 한계점을 가지고 있다. 본 연구에서는 이러한 한계를 극복하기 위하여, 연속류의 미시적 행태자료를 통해 시추이 속도-밀도 관계. 집계간격과 교통량-속도-밀도 관계, 차두시간 분포특성, 그리고 자유속도 분포특성 분석을 수행하고, 용량의 기준이 되는 차두시간을 통계적으로 결정함으로써 교통제어를 위한 새로운 용량개념을 정의하고 이에 대한 용량산정방법을 개발하였다.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.573-594
• /
• 2024

This article presents a research study, with both laboratory and field tests, of a deep foundation in a markedly anisotropic medium. Particularly it has focused on the evaluation of the behavior of a pile, one meter in diameter, embedded in a rocky environment with difficult conditions, in the Flysch of the Spanish city of San Sebastián. To carry out the research, the site of a bridge over the Urumea River was chosen, which was supported by pre-excavated reinforced concrete piles. 4 borings were carried out, by the rotation and washing method, with continuous sampling and combined with flexible dilatometer tests. In the field, an Osterberg load test (O-cell) was performed, while in the laboratory, determinations of natural moisture, natural unit weight, uniaxial compressive strength (UCS), point load strength (PLS), compressive wave propagation velocity (V_c) and also triaxial and direct shear tests were carried out. The research results indicate the following: a) the empirical functions that correlate the UCS with the PLS are not always linear; b) for the studied Flysch it is possible to obtain empirical functions that correlate the UCS with the PLS and with the V_c; c) the bearing capacity of the studied Flysch is much greater than if it is evaluated by different load capacity theories; d) it is possible to propose an empirical function that allows evaluating the mobilized shear strength (τ_m), as a function of the UCS and the displacement relative of the pile (δ_r).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.301-302
• /
• 2007

Maximum power consumption was up to 6,228kW in the summer of 2007 due to steady development of industry as well as increased demand of individual. Twenty fossil-Fired Thermal Power Plant for 500MW were underconstructed at present. KEPRI(Korea Electric Power Research Institute) manage 'Development of Advanced Fossil-Fired Thermal Power Generation System' project to construct high efficient power plant of 1000MW capacity for preparing increased demand of power. Design of control logic and data sampling were explained and high efficient control logic was simulated in detail in 'The Development of Next Generation Power Plant Instrument and Control System'(sub-project of 'Development of Advanced Fossil-Fired Thermal Power Generation System' project).

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.490-495
• /
• 2020

The power loss of large-capacity systems using single-phase inverters has attracted considerable attention. In this study, optimal switching sequence model prediction control at a low switching frequency is proposed to reduce the power loss in a high-power inverter system, and a compensation method that can be utilized for model prediction control is developed to reduce errors in accordance with sampling values. When a three-level, single-phase inverter using a switching frequency of 600 Hz and a sampling frequency of 12 kHz is adopted, the power factor is improved from 0.95 to 0.99 through 3 kW active power control. The performance of the controller is also verified.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권6호
• /
• pp.179-191
• /
• 2016

In addition to the measurement of the concentration of soil contaminants, the new idea of indicative parameters was proposed to validate the remedial works through the monitoring for the changes of soil characteristics after applying the clean up technologies. The parameters like CFU (colony forming unit), pH and soil texture were recommended as indicative parameters for land farming. In case of soil washing, water content and the particle size distribution of the sludge were recommended as indicative parameters. The sludge is produced through the particle separation process in soil washing and it is usually treated as a waste. The parameters like water content, organic matter content, CEC (cation exchange capacity) and CFU were recommended as indicative parameters for the low temperature thermal desorption method. Besides the indicative parameter, sampling methods in stock pile and the optimal minimum amount of composite soil sample were proposed. The rates of sampling error in regular grid, zigzag, four bearing, random grid methods were 17.3%, 17.6%, 17.2% and 16.5% respectively. The random grid method showed the minimum sampling error among the 4 kinds of sampling methods although the differences in sampling errors were very little. Therefore the random grid method was recommended as an appropriate sampling method in stock pile. It was not possible to propose a value of optimal minimum amount of composite soil sample based on the real analytical data due to the dynamic variation of $CV_{fund{\cdot}error}$. Instead of this, 355 g of soil was recommended for the optimal minimum amount of composite soil sample under the assumption of ISO 10381-8.

• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.351-359
• /
• 2015

구조물의 붕괴성능을 정확하게 평가하기 위해서는 구조물과 관련된 구조부재 및 지반운동의 불확실성을 고려한 확률적 접근방식이 요구된다. 불확실성의 종류에 상관없이 불확실성은 구조물의 응답에 영향을 미치게 되는데, 구조물의 성능목표를 설정함에 있어 이러한 불확실성 전파를 예측할 필요가 있다. 최근 들어, 구조물의 붕괴성능을 평가하는 방법으로 사용되고 있는 증분동적해석은 지반운동과 관련된 임의적 불확실성을 해석과정에서 고려할 수 있다는 장점이 있으나, 확률론적 평가를 위한 또 다른 중요 요인인 인식론적 불확실성을 직접적으로 평가할 수 없다는 제한사항이 있다. 본 연구에서는 철골모멘트골조를 표본 건물로 선정하여 인식론적 불확실 요인으로 정의한 구조물의 고유감쇠, 지진중량, 구조부재의 항복강도 및 탄성계수가 구조물의 붕괴성능에 미치는 영향을 확률적으로 평가하였다. 이를 위하여 라틴 방격 추출법을 사용한 몬테카를로 시뮬레이션을 통해 증분동적해석을 수행하여 구조시스템 붕괴성능의 변동성을 정량적으로 예측하였다. 해석결과, 붕괴성능의 변동성에 인식론적 불확실성을 대표하는 변수 중에서 구조물 고유감쇠의 영향이 가장 두드러지는 것으로 나타났다.