• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.343-350
• /
• 2002

This study was conducted to standardize the manufacturing process of doenjang. The preparation methods, kinds and levels of the ingredients were determined by the statistical surveys of literatures obtained from cooking books, scientific papers and doenjang manufacturing factories. The standardized preparation of fermentation methods of doenjang were classified into two large groups, that were traditional and modified (commercialized) methods. Most soybeans used in doenjang preparation were the large size. To prepare traditional doenjang, soybeans were cleaned, scaled and cooked for 2 hrs at atmospheric pressure. These cooked soybeans were crushed in water and molded as brick shape. The molded soybean was dried for 2 days in the air, hung up by rice straw and fermented for 30~60 days under natural environmental condition (called meju). Recently soybean grain meju that inoculated with Asp. oryzae also frequently used to make traditional doenjang. The fermented meju was brined with a ratio of meju : salt : water = 18.4 : 14.6 : 67.0 and the meju-brine mixtures were ripened for 2 months. When the meju-brine mixture was fully fermented, it was separated into liquid and solid parts. The crushed solid part was further ripened in a separated pottery for 60 days and become doenjang. The liquid part was filtered, boiled and used as soy sauce. In modified commercial doenjang preparation, soybeans were cocked by autoclaving and then cooled about to 3$0^{\circ}C$. Separately, steamed barley grains or wheat flour were inoculated with 0.2% Asp. oryzae and incubated for 3 days at 3$0^{\circ}C$ and mixed with the crooked soybeans, salt, and water (soybean : salt : starch : water = 39.8 : 12.5 : 22.6 : 25.1). These mixtures were ripened for 30 days at 3$0^{\circ}C$. It seems that the manufacturing process of traditional doenjang needs to be more industrialized, whereas, the commercial doenjang preparation is going to adapt the traditional processing method of doenjang.

• Membrane and Water Treatment
• /
• v.1 no.1
• /
• pp.13-37
• /
• 2010

The performance of an electrodialyzer for concentrating seawater is predicted by means of a computer simulation, which includes the following five steps; Step 1 mass transport; Step 2 current density distribution; Step 3 cell voltage; Step 4 NaCl concentration in a concentrated solution and energy consumption; Step 5 limiting current density. The program is developed on the basis of the following assumption; (1) Solution leakage and electric current leakage in an electrodialyzer are negligible. (2) Direct current electric resistance of a membrane includes the electric resistance of a boundary layer formed on the desalting surface of the membrane due to concentration polarization. (3) Frequency distribution of solution velocity ratio in desalting cells is equated by the normal distribution. (4) Current density i at x distant from the inlets of desalting cells is approximated by the quadratic equation. (5) Voltage difference between the electrodes at the entrance of desalting cells is equal to the value at the exits. (6) Limiting current density of an electrodialyzer is defined as average current density applied to an electrodialyzer when current density reaches the limit of an ion exchange membrane at the outlet of a desalting cell in which linear velocity and electrolyte concentration are the least. (7) Concentrated solutions are extracted from concentrating cells to the outside of the process. The validity of the computer simulation model is demonstrated by comparing the computed results with the performance of electrodialyzers operating in salt-manufacturing plants. The model makes it possible to discuss optimum specifications and operating conditions of a practical-scale electrodialyzer.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.229-232
• /
• 2005

The study on the improvement of manufacturing process of RJ-4 liquid fuel that have high flash point, was carried out. In preparing of RJ-4 using commercially available MCPD, 1st, 2nd hydrogenation and isomerization reaction were enabled 1 step continuous process by combined use of heteropoly phosphoroustungstic cesium salt catalyst and 2nd stage-heat-controllable reactor. Also when heteropolyacid cesium salt was used as a isomerization catalyst instead of aluminum chloride, formation rate of exe-THDMCPD was higher, the catalyst could be easily separable from product and there was no production of waste acid, so this new reaction condition was confirmed as the environment friendly process.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.4
• /
• pp.392-398
• /
• 2020

Producing solar grade silicon using an inexpensive method is a key factor in lowering silicon solar cell costs; the direct electrochemical reduction of SiO₂ in molten salt is one of the more promising candidates for manufacturing this silicon. In this study, SiO₂ granules were electrochemically reduced in molten CaCl₂ (850℃) using Ag-Si eutectic droplets that catalyze electrochemical reduction and purify the Si product. When Ag is used as the working electrode, the Ag-Si eutectic mixture is formed naturally during SiO₂ reduction. However, since the Ag-Si eutectic droplets are liquid at 850℃, they are easily lost during the reduction process. To minimize the loss of liquid Ag-Si eutectic droplets, a cylindrical graphite container working electrode was introduced and Ag was added separately to the working electrode along with the SiO₂ granules. The graphite container working electrode successfully prevented the loss of the Ag-Si eutectic droplets during reduction. As a result, the Ag-Si eutectic droplets acted as stable catalysts for the electrochemical reduction of SiO₂, thereby producing one-dimensional Si rods through a mechanism similar to that of vapor-liquid-solid growth.

• Food Science of Animal Resources
• /
• v.42 no.2
• /
• pp.252-265
• /
• 2022

Kocuria salsicia can survive in extreme environments and cause infections, including catheter-related bacteremia, in humans. Here, we investigated and evaluated the characteristics of nine K. salsicia strains (KS1-KS9) isolated from cheese brine from a farmstead cheese-manufacturing plant in Korea from June to December, 2020. Staphylococcus aureus American Type Culture Collection (ATCC) 29213 was used as a positive control in the growth curve analysis and biofilm-formation assays. All K. salsicia isolates showed growth at 15% salt concentration and temperatures of 15℃, 25℃, 30℃, 37℃, and 42℃. KS6 and KS8 showed growth at 5℃, suggesting that they are potential psychrotrophs. In the biofilm-formation analysis via crystal violet staining, KS6 exhibited the highest biofilm-forming ability at various temperatures and media [phosphate buffered saline, nutrient broth (NB), and NB containing 15% sodium chloride]. At 25℃ and 30℃, KS3, KS6, and KS8 showed higher biofilm-forming ability than S. aureus ATCC 29213. The antimicrobial resistance of the isolates was evaluated using the VITEK^® 2 system; most isolates were resistant to marbofloxacin and nitrofurantoin (both 9/9, 100%), followed by enrofloxacin (7/9, 77.8%). Five of the nine isolates (5/9, 55.6%) showed multidrug resistance. Our study reports the abilities of K. salsicia to grow in the presence of high salt concentrations and at relatively low temperatures, along with its multidrug resistance and tendency to form biofilms.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.11
• /
• pp.1654-1659
• /
• 2010

In order to utilize squid liver by-products, which is normally discarded as industrial waste in the process of squid manufacturing, salt-fermented squid liver sauce was prepared experimentally and also tested for inhibitory activity against angiotensin converting enzyme (ACE). ACE inhibitory activity of squid liver sauce was increased with the elapse of fermentation days until 12 months, followed by a constant level of inhibitory activity thereafter. 15-month-old sauce ($IC_{50}=29.66\;{\mu}g$) was filtered through PM-10 membrane (M.W. cut-off 10,000 Da) to obtain the peptides fractions with ACE inhibition activity. Filtered fractions were applied to a Bio-gel P-2 column and three active fractions (A, B and C) were collected. Among them, fraction B applied to a SuperQ-Toyopearl 650S column chromatography lead to the isolation of active B-1 fraction. It has the ACE inhibitory activity ($IC_{50}=5.46\;{\mu}g$). The main composition of its amino acids is lysine, glycine and proline, which cover about 85% of the total amino acids.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.5
• /
• pp.281-285
• /
• 2005

Raw meat of mackerel (Scomber japonicus) was salted by refined, sun-dried, bamboo, and KC1-added bamboo salts. Antimutagenic activity on N-methyl-N'-nitro-N-nitrosoguanidine (MNNG) in Ames test and growth inhibitory effects of AGS human gastric and HT-29 human colon adenocarcinoma cells were investigated using methanol extracts of the salted mackerels. Mackerel salted sun-dried, bamboo, and KC1-added bamboo salts used increased the antimutagenic activities against MNNG, however, the sample treated with refined salt reduced the antimutagenic activity. Inhibitory effects of the salted-mackerels on the growth of human cancer cells were increased as dose dependent pattern. Mackerel salted with refined salt activated the growth of AGS human gastric adenocarcinoma cells, but mackerel salted with sun-dried, bamboo, and KC1-added bamboo salts kept or increased anticancer effect compared to the raw mackerel. Mackerel salted with KC1-added bamboo salt led to the highest antimutagenic and anticancer activities. These results suggest that antimutagenic and anticancer effects of mackerel during manufacturing of the salted-mackerel could be enhanced by using different kind of salts such as bamboo, or KC1-added bamboo salts.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.231-238
• /
• 1994

The brined Chinese cabbages and kimchi seasoning mixture were separately stored and used for preparation of kimchi and the alternative method of conventional kimchi-manufacturing process was investigated. Chinese cabbages brined with 3% and 7% salt contents were stored at $0^{\circ}C$ and $10^{\circ}C$, and kimchi seasoning mixture without salt was stored at $4^{\circ}C$ and $10^{\circ}C$. The changes in pH and total acid of the cabbages were significantly slowly for the brined cabbage of 7% salt and storage at $0^{\circ}C$. Microbial growth including lactic acid bacteria were also increased slowly at $0^{\circ}C$. But, pH and total acid content of the kimchi seasoning mixture were not changed significantly at both temperatures during storage. Sensory evaluation on the kimchi samples showed that the modified method of kimchi preparation with separately stored seasoning mixture and brined cabbages is useful industrially or at home.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.1
• /
• pp.65-69
• /
• 2005

We have developed a new method of manufacturing salts by horizontal spray drying technique, using the concentrated deep ocean water after desalination processes. We studied the chemical characteristics of the spray-dried salts. Sodium content in the spray salts is $28.4\%$, which is $10-30\%$ lower than that of bay salts, bamboo salts and boiling salts $(32-38.2\%)$. However, the contents of magnesium, potassium and calcium of the spray salts are 2.5 times, 3 times and 4.5 times higher relative to those of bay salts, respectively. On the one hand, sulfur content in spray salts is 14 times lower than those of bay salts, which is caused by their volatilization during spray and vaporization of the concentrated seawater. Enrichment factors of Mg (0.8), K (0.9) and Ca (1.0) in the spray salts are relatively higher than those in bay salt (0.2-0.3), bamboo salt (0.15-0.4) and boiled salt (0.4-0.7), respectively. On the contrary, enrichment factor of sulfur in spray salts is observed to be 0.07, which is considerably lower than those in other salts (0.3-0.7). It means that the minerals like Mg, K and Ca can be well conserved from seawater to salts through spray drying techniques, while volatile elements like sulfur, lead, mercury and organic compounds can be easily removed from seawater via spray and heating processes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.2
• /
• pp.98-102
• /
• 2000

To investigate quality characteristics of southeast asian salt-fermented fish sauces, various chemical properties were examined against 13 kinds of southeast asian salt-fermented fish sauces. The range of chemical compositions were $60.6{\~}72.8{\%}$ moisture, $18.2{\~}25.8{\%}ash,\;0.9{\~}13.7{\%}$ crude protein and $14.1{\~}338.6\;mg/100 ml$ VBN. The pH and salinity were $4.66{\~}5.91,\;24.1{\~}30.6{\%}$, respectively. Total nitrogen, amino nitrogen, total free amino acid, and total ATP related compounds (sum of $ATP{\~}IMP$, HxR, Hx and uric acid) were in the ranges of $0.140{\~}2.199g,\;115.4{\~}1,643.0 mg,\;46.4{\~}9,056.3\;mg\;in\;100 ml,\;and\;0.829{\~}9.564 {\mu}mol\;in\;1\;ml$, respectively. Southeast asian salt-fermented lish sauces were rich in tree amino acids, such as glutamic acid, Iysine, leucine, alanine, aspartic acid, valine and isoleucine in the order.