• 한국안전학회지
• /
• 제30권6호
• /
• pp.56-62
• /
• 2015

Recently, one of countermeasures against aging SOC infrastructures, performance-focused management including the serviceability, functionality, durability, and economics has been changed from the structural safety-focused evaluation has changed into The current inspection and diagnosis for the major SOC facilities in Korea has been carried out by the specific principle of details, and most of them checked by the visual inspection are focused on the repair and rehabilitation of the damaged structures, thus they are the preventive maintenance. However, the performance-focused management should be replaced for the effective and economic maintenance as wells as for the minimization of the damage. In this regard, this study the appropriacy of the current evaluation items about the concrete retaining wall, one of SOC infrastructures as the previous step forward the performance-focused management. In order to deduct the effective evaluation items in order, the entropy, analytic hierachy process (AHP), and promethee analysis were peformed and the results were compared and discussed.

• 자동차안전학회지
• /
• 제12권1호
• /
• pp.39-45
• /
• 2020

The express/intercity bus models have been developing for wheelchair users to provide the preferable long-distance travels by the Korean government research. In the previous studies, evaluation method was set up for the wheelchair users' safety and the study for wheelchair occupants' safety was performed under various crash loadings mimic to real accidents, frontal crash, side impact and rollover, etc. This study was focused on the evaluation of occupant behaviors and injuries (head and chest) during vehicle impact loading cases in order to ensure the safety of wheelchair passengers in the bus. The occupant response and belt loading data during the sled FE simulation were compared with those of the sled test. The simulation results showed overall safety tolerances of wheelchair occupants under the severe frontal deceleration, side impact loading based on the FMVSS 214 configuration and bus rollover loading.

• 대한의용생체공학회:의공학회지
• /
• 제43권3호
• /
• pp.147-152
• /
• 2022

This research is to measure real-time temperature distribution inside a tissue-mimicking phantom for the safety and effectiveness evaluations of focused ultrasound (FUS) device capable of linear scanning stimulation. Since the focusing area of the FUS stimulation device is smaller than diameter of conventional thermal probe and keeps moving, it is impossible to monitor temperature distribution inside the phantom. By using the phantom with a thin film temperature sensor array inserted, real-time temperature change caused by the FUS device was measured. The translation of the measured temperature peak was also tracked successfully. The present phantom had been experimentally proven to be applicable to validate the performance and safety of the therapeutic ultrasound devices.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권2호
• /
• pp.123-131
• /
• 2021

In this study, safety education contents for medical radiation workers were produced based on Mixed Reality(MR). Currently, safety training for radiation workers is based on theory. This is insufficient in terms of worker satisfaction and efficiency. To address this, we created ICT(Information and Communication Technologies)-based MR radiation worker safety education content. The expected effect of Mixed Reality worker safety education content is that education is possible without space and time constraints, realistic education is possible without on-site training, and interaction between images is possible through reality-based 3D images, enabling self-directed learning Is that. In addition, learning in a virtual space expressed through HMD(Head Mounted Display) is expected to make education more enjoyable and increase concentration, thereby increasing the efficiency of education. A quantitative evaluation was conducted by an accredited institution and a qualitative evaluation was performed on users, which received excellent evaluation. The MR safety education conducted in this study is expected to be of great help to the education of medical radiation workers, and is expected to develop into a new educational paradigm as online education in accordance with Corona 19 progresses.

• 대한토목학회논문집
• /
• 제39권1호
• /
• pp.105-114
• /
• 2019

최근 사회여건의 변화로 도로정책의 패러다임은 이용자 중심의 안전성 위주로 변화하고 있다. 최근 시설개량사업은 지속적인 증가 추이를 보이고 있으나 대부분 경제적 타당성 확보가 미흡한 실정이다. 따라서 도로 안전성에 대한 객관적이고 타당한 분석을 통해 합리적인 시설개량 대상사업 선정이 절실히 요구되는 시점이다. 본 연구에서는 새로운 도로 안전성 평가기법 개발을 위해 국도, 국지도, 지방도 등 75개 노선에 대해 현행 도로 안전성 평가기법을 토대로 데이터를 구축하였으며, 이렇게 구축된 데이터를 중심으로 문제점을 분석하여, 새로운 도로 안전성 평가기법의 기초자료로 활용하였다. 본 연구에서는 교통사고발생현황을 가중치를 통해 일반 평가항목으로 추가하고, 지자체 공무원들의 문제 지적 및 건의 사항 등을 통해 최종 평가항목을 확정하였다. 각 평가항목에 대해서는 전문가 AHP (Analytic Hierarchy Process) 설문 평가를 통해 합리적 가중치를 도출하였으며, 항목별 평가기준을 토대로 안전지수(Safety Index)를 결정하였다. 결정된 각 항목의 안전지수(SI)를 토대로, 각 안전지수의 곱인 종합 안전지수를 산출하였으며, 위험구간 판정 기준을 정립하였다. 또한, 위험구간 연장 비율인 종합위험도에 따른 시설개량 대상사업 선정 기준 도출 등 합리적이고 객관적인 도로 안전성 평가기법을 개발하였다.

• 대한의용생체공학회:의공학회지
• /
• 제31권2호
• /
• pp.123-128
• /
• 2010

The thermometers is widely used in diagnostic medical devices, and the safety and accurate performance of these devices are important in the diagnosis and monitoring of personal health. Especially, the accuracy of infra-red thermometer is highly emphasized. Here two typical thermometers are utilized for this purpose: the electronic thermometers measure body temperature by contacting to subject while infra-red thermometers measure by no contacting to subject. Therefore, the evaluating items of each thermometer are different, and the standard for each temperature is highly needed. But, there have been no international standards of each thermometer such as IEC. In this paper, we developed the standards of electronic and infra-red thermometer based on national standards such as KS, ASTM, EN, JIS and FDA guidance. The new standards focused on the safety and suitable performance for health care. This standards were applied to enact and revise the electronic medical device standards. So it can be applied to evaluate the safety and performance on technical file review. We predict that this standard will improve the quality of diagnostic medical devices (thermometers) and increase the international competitive power of domestic product.

• 한국수자원학회논문집
• /
• 제57권1호
• /
• pp.21-33
• /
• 2024

최근 기후변화로 영향으로 재해의 양상이 다양화 및 대형화되고 있다. 이에 우리나라는 안전한 치수계획을 세우기 위해 수자원장기종합계획에서 홍수위험도 평가를 위해 홍수피해잠재능(Potential Flood Damage, PFD)의 개념이 도입되었다. 하지만, PFD의 문제점이 제기되면서 다양한 연구들이 진행되어왔다. 선행연구 대부분 PFD 인자를 수정·보완하거나 인자를 새로 추가하는 연구들이 진행되었다. 본 연구는 위험성 인자를 내포하고 있는 홍수위험지도를 사용하여 기존의 치수안전도 평가방법을 개선하고, 대상지역인 영·섬진강권역을 중심으로 평가하고자 한다. 본 연구에서 제시한 평가방법은 위험성 요소 및 잠재성 요소 분석, PFD 및 홍수방어수준 분석, 치수안전도 평가로 크게 3가지로 제시하였다. 본 연구에서 제시한 개선된 평가방법은 각종 치수안전도 평가 및 치수계획 수립시 활용될 것으로 기대된다.

• 한국시스템다이내믹스연구
• /
• 제14권4호
• /
• pp.143-163
• /
• 2013

This study is firstly aiming at diagnosing the present problems of evaluating the performance, especially in the field of disaster and safety management, of LGA (Local Government Authorities) in Korea. The study also deals with developing alternatives to solve a series of barrier factors revealed during the evaluation process using System Dynamics. This paper therefore presents literature review including the official documents published by the government and the performance evaluation studies of LGA. Moreover the authors analyze the current practice of the CELG (Combined Evaluation of Local Governments) as performance management, address and map a series of barrier factors in the CELG process to elaborate the CLDs (Causal-Loop Diagrams) and find solutions using system thinking with the CLDs. According to the analysis results, the core barrier factors to overcome is lack of proactive indicators/indices in the current practice of the CLEG. The authors therefore recommend to develop more proactive indicators that leads to avoid difficulties in measuring the LGA output, as well as to lessen the burden in competition for rankings and goal of the displaced.

• 대한안전경영과학회지
• /
• 제8권4호
• /
• pp.151-166
• /
• 2006

One of The standard issue in riding on the wave of the information system(IS) is records of performance, grow unprecedently fast, and has highly uncertain future. Within the framework of IS Evaluation, The main purpose of this study is to suggest performance quality evaluation system as follows, The Integrated Quality Evaluation Model Design(IQEMD) of Information System helps corporations to improve productivity, customer service and corporate competitive power. To respond flexibly this trend, we have to realize that the information system has to keep the most effective optimal information network at the proper time. The existing evaluation method has been concentrated on the evaluation of a degree of the information system maturity focused on static viewpoints. The evaluation of potential factors to affect the future-oriented performance, that can analyze both unit business being able to apply an information system base was used efficiently well and what performance evaluation item was obtained actually, was insufficient relatively. In this paper, An integrated quality evaluation method will analyze a degree of information system maturity in dynamic evaluation viewpoints rather than in static evaluation viewpoints. finally we estimated the relative degree of importance of each determinant using the AHP methodology The validity of the proposed model was also partially proved using two different methods, holistic and historical approach.

• 대한의용생체공학회:의공학회지
• /
• 제32권2호
• /
• pp.151-157
• /
• 2011

Tattooing is a performance for decorative and cosmetic marking by placing permanent ink into the skin. As the cultural meaning of tattoo in Korea is changing, the tattoo machines are widely spread n permanent cosmetic market. Though the use of the tattoo machine was increased, the evaluation standards of tattoo machine were not existed. Korea Food and Drug Association regulated the electrical and mechanical safety standards which were founded on the IEC 601-1 second edition. Also they regulated he biological safety standards which were derived from the ISO 10993 series, however, these general valuations of common medical device were insufficient for evaluating tattoo machine. We developed the standards of tattoo machine for safety and performance evaluation for tattoo machine by preliminary hazard analysis in ISO 14971. The evaluation criteria of tattoo machines are focused on the mechanical invasion. We suggested the additional evaluation items of the needle speed, length, vibration with general valuation criteria of common medical device. We anticipate that this research may be a primary stage to figure a standard regulation and evaluation for tattoo machine.