• 제목/요약/키워드: safety work model

검색결과 671건 처리시간 0.028초

일부 제조업 사업장의 사무 및 공장동에서의 라돈농도 수준 및 유효선량 평가 (Evaluation of Effective Dose and Exposure Levels of Radon in Office and Plant Buildings)

  • 정은교;김기웅
    • 한국산업보건학회지
    • /
    • 제27권1호
    • /
    • pp.38-45
    • /
    • 2017
  • Objectives: Radon may be second only to smoking as a cause of lung cancer. Radon is a colorless, tasteless radioactive gas that is formed via the radioactive decay of radium. Therefore, radon levels can build up based on the amount of radium contained in construction materials such as phospho-gypsum board or when ventilation rates are low. This study provides our findings from evaluation of radon gas at facilities and offices in an industrial complex. Methods: We evaluated the office rooms and processes of 12 manufacturing factories from May 14, 2014 to September 23, 2014. Short-term data were measured by using real-time monitoring detectors(Model 1030, Sun Nuclear Co., USA) indoors in the office buildings. The radon measurements were recorded at 30-minute intervals over approximately 48 hours. The limit of detection of this instrument is $3.7Bq/m^3$. Also, long-term data were measured by using ${\alpha}-track$ radon detectors(${\alpha}-track$, Rn-tech Co., Korea) in the office and factory buildings. Our detectors were exposed for over 90 days, resulting in a minimum detectable concentration of $7.4Bq/m^3$. Detectors were placed 150-220 cm above the floor. Results: Radon concentrations averaged $20.6{\pm}17.0Bq/m^3$($3.7-115.8Bq/m^3$) in the overall area. The monthly mean concentration of radon by building materials were in the order of gypsum>concrete>cement. Radon concentrations were measured using ${\alpha}-track$ in parallel with direct-reading radon detectors and the two metric methods for radon monitoring were compared. A t-test for the two sampling methods showed that there is no difference between the average radon concentrations(p<0.05). Most of the office buildings did not have central air-conditioning, but several rooms had window- or ceiling-mounted units. Employees could also open windows. The first, second and third floors were used mainly for office work. Conclusions: Radon levels measured during this assessment in the office rooms of buildings and processes in factories were well below the ICRP reference level of $1,000Bq/m^3$ for workplaces and also below the lower USEPA residential guideline of $148Bq/m^3$. The range of indoor annual effective dose due to radon exposure for workers working in the office and factory buildings was 0.01 to 1.45 mSv/yr. Construction materials such as phospho-gypsum board, concrete and cement were the main emission sources for workers' exposure.

수도권 거주가구의 주거면적 변화 결정요인: 수도권 내 주거이동 방향에 따라서 (The Determinants of Change in Residential Size of Households in the Seoul Metropolitan Area: According to the Patterns of Residential Mobility)

  • 정수영
    • 지역연구
    • /
    • 제37권3호
    • /
    • pp.19-36
    • /
    • 2021
  • 우리나라의 대부분의 인구가 거주하는 수도권에서는 다양한 유형의 주거이동이 나타날 것을 예상할 수 있다. 특히 비대면 상황이 증가하는 시대에 중요한 요소로 떠오르고 있는 주거면적의 변화 역시 이동 방향에 따른 차이가 존재할 수 있고 영향요인 또한 다양하게 나타날 것이다. 따라서 이동 방향에 따른 주거면적의 상향, 하향과 영향요인의 분석은 인구 집중도가 높은 수도권 지역을 대상으로 하는 주택정책 방향성에 시사점을 제시 할 수 있을 것이다. 이에 본 연구는 수도권 내 이동방향에 따른 주거면적의 변화에 대한 영향요인을 비교 분석한다. 구체적인 연구질문은 다음과 같다. 첫째, 수도권 주거이동 방향에 따른 주거면적의 상향 및 하향에 차이가 있는가? 둘째, 수도권 주거 이동 방향에 따른 주거면적 상향 및 하향 영향요인에 차이가 있는가? 연구질문에 답하기 위해 2018년 주거실태조사를 활용하여 t-test와 이항 로지스틱 회귀분석을 활용하였다. 본 연구의 주요 분석결과는 다음과 같다. 첫째, 수도권 주거이동 방향에 따라서 주거면적의 상향 및 하향은 통계적으로 유의미한 차이가 있으며 경인지역에서 경인지역으로 이동했을 경우 주거면적의 상향을 경험한 가구가 많았다. 둘째, 주거 면적 상향 이동의 경우 이전 거주지가 서울인 경우가 많고, 하향 이동의 경우 경인지역에서 이동한 가구가 많다. 마지막으로 각 주거이동 방향별로 주거 면적 상향이동에 영향을 미치는 요인은 다르게 나타났다. 이러한 분석결과를 토대로 수도권 내 주거 면적의 상향 및 하향 이동에 대한 이론적, 정책적 함의를 제시한다.

선박의 엔드라인 폭연방지기의 요소기술에 관한 연구 (A Study on the Element Technologies in Flame Arrester of End Line)

  • 팜민억;최민선;김부기
    • 해양환경안전학회지
    • /
    • 제25권4호
    • /
    • pp.468-475
    • /
    • 2019
  • 엔드라인 폭연방지기는 수직 환기장치에 폭연방지와 함께 대기방출을 하도록 한다. 엔드라인 폭연방지장치는 선박과 같은 산업현장의 다양한 분야에 적용된다. 폭연방지기에서 스프링은 스프링 부하와 스프링의 탄성이 후드 개방 모멘트를 결정하므로 필수 부품이다. 더욱이, 장치 내 스프링은 고온의 상태에서도 작동해야 한다. 따라서, 폭연이 나타나기 시작할 때 스프링의 기계적 하중과 탄성을 분석할 필요가 있다. 이 연구에서는 엔드라인 폭연방지기의 작동 프로세스의 시뮬레이션을 기반으로 열 및 구조해석을 수행하으며, 스프링의 3차원 모델은 CFD 시뮬레이션을 이용하였다. CFD 해석은 FEM 시뮬레이션 값을 입력하여 스프링 구조를 분석한다. 본 연구에서는 스프링 부하의 43 kg, 93 kg 및 56 kg 세 가지 경우 즉, 150 mm 스프링 디플렉션에 부합하도록 집중적으로 관찰하였다. 결과적으로, $1,000^{\circ}C$ 가열조건 하에서 5분 후에 스프링 부하가 10 kg 감소했다. 시뮬레이션 결과는 연소 시간 변화에 따라 스프링의 부하와 탄성을 예측하고 추정할 수 있었다. 또한, 연구의 결과는 폭연방지기의 제조자들에게 역화방지장치뿐만 아니라 스프링의 설계를 최적화하기 위한 참고 자료로 활용할 수 있다.

국가안전관리: 한국의 시민보호(위기재난관리) 체계에 관한 비판적 고찰 (Homeland Security Management: A Critical Review of Civil Protection Mechanism in Korea)

  • 김학경
    • 시큐리티연구
    • /
    • 제26호
    • /
    • pp.121-144
    • /
    • 2011
  • 현재 우리나라의 국가안전관리(위기재난관리)체계를 지탱하고 있는 기본법은 '재난 및 안전관리기본법'이다. 이러한 '재난 및 안전관리기본법' 하에서 우리나라의 국가안전관리체계는 위기와 재난을 효율적으로 관리하기 위하여 이른바 삼단체계(중앙정부, 시도, 시군구)를 채택하고 있다. 통합위기관리체계(IEM)는 일차적으로 지역 대응기관의 조정과 협력(Coordination and Cooperation)체계를 중시하는 개념이며, 특히 서로 동등한 위치에서 기관과 기관 간의 협력을 강조하고 있다. 이러한 통합위기관리체계의 흐름에 발맞추어 영국과 미국의 국가안전관리체계는, 지역사회 내의 지역대응기관들이 중앙정부나 연방정부의 직접적인 개입없이 일차적으로 시민보호와 관련된 문제(위기 및 재난)를 관리하는 시스템을 구축하고 있다. 다시 말해, 영국과 미국에서는 위기와 재난의 범위가 아주 광범위하고 복잡한 경우, 이로 인하여 중앙정부의 조정과 협력이 절실히 요구되는 때에만 비로소 중앙정부의 개입이 직접적으로 이루어지고 있는 것이다. 이와 반대로 한국의 국가안전관리체계는 지시와 통제(Command and Control) 중심의 중앙집권화 된 시스템을 채택하고 있기 때문에, 위기재난 발생시(중요도에 관계없이) 중앙 정부가 쉽게 지역단위의 지휘체계를 무시하고 이를 통제하고 간섭할 수 있다. 현대사회는 불확실성, 비친숙성 및 비예측성이 증폭되고 있는, 이른바 '위험사회(Risk Society)' 또는 '포스트모던 사회(Post-modern Society)'라고 일컬어진다. 이러한 불확실성의 시대에서 과연 우리의 하향식 국가안전관리체계가, '위험사회(Risk Society)'와 '포스트모던 사회(Post-modern Society)'의 불확실성, 비친숙성, 비예측성을 효과적으로 관리할 수 있는지 의문점이 제기된다. 이러한 맥락에서, 동 논문은 한국의 시민보호체계도 영국과 미국의 위기재난관리시스템과 마찬가지로 분권화된 조정과 협력모델(Coordination and Cooperation)로 변화해야 한다고 주장한다. 이를 위해서, 현행 '재난 및 안전관리기본법' 체계 하에서 우리나라의 시민보호체계 및 안전관리체계를 비판적으로 검토하고, 이를 토대로 국가안전관리체계의 발전 방향에 대한 정책적 시사점을 제시하고자 한다.

  • PDF

보강판의 해석모델에 따른 좌굴 및 소성거동 평가 (Estimation of Buckling and Plastic Behaviour according to the Analysis Model of the Stiffened Plate)

  • 고재용;오영철;박주신
    • 한국항해항만학회지
    • /
    • 제31권3호
    • /
    • pp.271-279
    • /
    • 2007
  • 선체구조는 기본적으로 판부재의 조합으로 이루어져 있으며, 이러한 판부재의 하중분담 능력 혹은 최종강도 평가는 선체구조의 합리적인 설계 및 구조의 안정성 평가에 있어서는 아주 중요하다. 또한, 선체구조를 구성하고 있는 구조요소들은 작용외력에 대하여 개별적으로 작용하지 않으며 전체적으로 연속거동을 하게 된다. 실제 선박에서의 붕괴형태 중 한가지는 종방향 굽휨에 의해서 갑판 혹은 선저부에 좌굴 및 소성붕괴이다. 그래서, 합리적인 설계에서는 이러한 급작스런 붕괴형태를 방지하기 위하여 좌굴 및 소성붕괴 거동을 파악하는 것이 아주 중요하며, 실제 선박에서는 갑판부와 선저부에서는 하중분담 능력을 증가시키기 위하여 여러개의 종보강재를 가진 보강판 구조의 설계를 하게 된다. 본 연구에서는 선체 판넬구조의 모델링 방법에 따른 최종강도 거동의 차이를 분석하여, 합리적인 모델링영역을 규명하고자 한다. 사용된 해석 모델은 실제 상선의 이중저구조에서 사용되는 판넬에서 채택하였으며 유한요소해석 모델링 시 3가지 단면형상에 대해 각각 6가지 서로 다른 해석모델을 적용하였으며, 이때 보강재의 단면형상을 변화하였다. 본 연구의 목적은 압축하중이 작용하는 선체 보강판구조에서 해석영역에 대한 좌굴 및 최종강도 거동의 특성을 분석하였다.

선망어법의 어획과정에 있어서 죔줄의 장력-I -망형별 죔줄의 장력에 관한 모형실험- (A Study on the Tension of a Purseline in the Process of Catch of the Purse Seine Fishing Methods-I -Model Experiment on the Tension of a Purseline by Net Shapes-)

  • 박정식
    • 수산해양기술연구
    • /
    • 제35권1호
    • /
    • pp.1-10
    • /
    • 1999
  • The north-west sea area of Cheju Island is where originate two layer current in the summer season. The case of the fishing operations in this sea area is almost impossible for normal expansion of the net gear for shooting net, and is happened to be frequent occasions for rise of tension suddenly in purseline by changes of the net shapes in the operation. Therefore, the safety of the operations is often obstructed by the above mentioned. In connection with the above, model experiments on the purse seine in the circulating water tank was carried out in comparison and analysis on the changes of tension in the pruseline by deformation of purse seine in the sea area of two layer current. THe results obtained are as follows;In the case of the required time for pursing of 20 minutes in the no current set, the increasing curve for tension of purseline can be expressed as:Y=0.0004x3+0.0098x2+0.3000x(r=0.9989)where Y is tension(metric tons) of a purseline, x is required time(minutes) for pursing. And, the maximum value of tension in this time was an increase of 31.3 percent at 15 minutes, and was a decrease of 30.3 percent at 30 minutes than that of 20 minutes.When the bottom margin of net is held on the position in velocity of 0.5 knot at three-eighths of net in the bottom current to the net height, the maximum tension of the required time for pursing of 30 minutes in tight set and loose set were decrease of 29.5 percent and 28.7 percent respectively than that of 20 minutes.The work load during the required time for pursing of 20 minutes were calculated 5.79×106 kgf·m in no current set, 7.89×106 kgf·m in tight set and 5.15×106 kgf·m in loose set, therefore it was an increase of 22.3 percent in tight set, and was a decrease of 11.1 percent in loose set than that of the no current set. Where tight set and loose set is a range of the bottom current with velocity of 0.5 knot at three-eighths of net to the net height.

  • PDF

치안서비스의 민간위탁 도입에 관한 연구 : 치안분업모델을 중심으로 (Introducing Contract-out in the Policing Service : Focusing on Policing segregated System)

  • 최정택
    • 시큐리티연구
    • /
    • 제12호
    • /
    • pp.309-333
    • /
    • 2006
  • 오늘날 공공분야의 민간위탁은 비용효과와 수요자 변화에 따른 탄력성 확보가 유리하고, 사업의 관리가 용이하다는 이유로 대부분의 공공사업 분야에서 실시되고 있는 상태이다. 이러한 사회적 변화는 치안구조와 지역방범체계의 변화 등과 함께 공공 치안서비스 부분의 민간위탁제도를 도입하는 문제에 대하여 많은 논의가 이루어지고 있다. 그러나 위탁사업 대상 범위의 제한, 민간 참여의 어려움 그리고 위탁 계약 방식의 한계와 같은 문제점들로 인하여 치안서비스 분야의 민간위탁사업 시행에는 아직 많은 걸림돌이 있는 실정이다. 이러한 문제점들을 해결, 보완하기 위하여 치안서비스 모델을 변화시켜 예산절감과 조직의 재구성을 도모하고, 가변성을 가질 수 있는 부분위탁형태의 개발 및 민${\cdot}$관 협력체제 확립 및 계약방식의 합리화가 필요하다 할 수 있다. 본 연구는 업무상의 특수성을 감안하여 기존 민간위탁의 개념과는 다르게 치안서비스 분야만의 기준을 다음과 같이 제시한다. (1)치안분업모델의 설계 (2)양자의 의견을 존중하고 타협점을 찾을 수 있는 새로운 혼합형태의 시스템 모델구축 (3)다자간 접근법을 통한 사회 모든 구성원의 참여기회 확대 (4)지명경쟁 입찰을 통한 계약 방식의 확립 등이다. 이처럼 공공안전 서비스 분야의 민간위탁은 타 정부분야의 민간위탁 형태와는 다른 형식으로 이루어져야 하며 국민의 안전을 담보로 한다는 점에서 업무선정과 방식에 대해 기준을 높여야 할 것이다.

  • PDF

병원급식에 일반위생관리기준과 HACCP 제도 적용을 위한 시설모델 개발 (Development of a Hospital Foodservice Facility Plan and Model based on General Sanitation Standards and RACCP Guidelines)

  • 이정숙;곽동경;강영재
    • 한국식품조리과학회지
    • /
    • 제19권4호
    • /
    • pp.477-492
    • /
    • 2003
  • The purposes of the study were to establish HACCP-based standards and guidelines for conducting a plan review to build, or renovate, hospital food service establishments, and ensure the safety of foodservice and reduce the risk of food borne illness. The scope of the study included suggestion for the planning of hospital foodservice facilities: layout, design, equipment and modeling. The results of this study can be summarized as follows: 1) The development of a foodservice facility plan based on the results of a survey, literature reviews and the results of interviews with foodservice managers from 9 general hospitals. This was composed of operational policies in foodservices, layout characteristics, space allocation, selection, design, specification standards for equipment and the construction principles of foodservice facilities. 2) Two foodservice facility models were developed, one for general hospitals with 900 beds (2,000 patients and 2,500 employee meals per day) and the other for general hospitals with 300 beds (600 patients and 650 employees meals per day). 3) The suggested kitchen space requirements for the foodservice facility models were 341.2 ㎡ (W 17,100mm x L 23,700mm) and 998.8㎡ (W 35,600mm x L 32,800mm) for the 300 and 900 beds hospitals, respectively, with both designs being rectangular. The space requirements for the equipment, in relation to the total operational area, in terms of ratios were 1:3.5 and 1:3.8 for the 300 and 900 beds hospitals, respectively. The recommended space allowances per bed for the developed foodservice facility models were 1.15 ㎡ and 1.11 ㎡ for the 300 and 900 beds hospitals, respectively, which were increased by more than 30% compared to those suggested in the precedent study, and considered appropriate for the implementation of the HACCP system. 4) The hospital foodservice facilities plans and models were developed based on the general sanitation standards, guidelines and the HACCP system, and included foodservice facility layout, product flow, physical separation between contaminated and sanitary areas, foodservice facility specifications with a 1/300 scale for a 300 bed, and a 1/400 scale for a 900 beds blueprint. 5) The main features of the developed foodservice facility plans and models were; physical separation between contaminated and sanitary areas to prevent cross contamination, product flow in one direction from the arrival of the raw material to the finished product, and separation of different work areas and the process of receiving & preparation of products, refrigeration & storage, cooking, assembly, cleaning & disinfection, employee areas and janitorial facilities. The proposed models from this study were presented as examples for those wanting to build, or renovate, their facility for the production of foods.

한방의료기관 감염관리에 대한 한의사의 인식도와 수행도 (Perception and Practice level of Korean Medical Doctors on Infection Control and Prevention in Korean Medicine Facilities)

  • 신헌태
    • 대한예방한의학회지
    • /
    • 제23권1호
    • /
    • pp.27-47
    • /
    • 2019
  • Purpose : This study was designed to identify the perception and practice level of infection control among korean medical doctors and to identify factors that may influence the performance and practice level. Methods : Data were collected using the on­line survey method. Seven hundred and eighty four Korean medical doctors(KMD) participated the survey. The study was conducted from December 2018 to January 2019. Results : The results of this study are as follows. 1. Participants who experienced infection risk by needles or sharp instruments were 596(76%). and participants who had experienced blood or body fluid contact with the mucous membrane or skin of the patient during treatment were 226(28.8%) of them. 2. The degree of perception and practice of the infectious guideline was higher in the group over 50 years, in the doctor group, in the group with more than 6 years experience in clinic and in the group who work in the hospital. (p < 0.05) 3. In the performance of the infection control management related to the Korean medical treatment, the practice level of the article 'Discard the remaining needle that used for one patient' was the lowest at 4.02, 'Identify the patient and check the validity period of sterilization of medicines or instruments' was the second lowest in 4.16. 4. Among the contents of "Prevention of Nosocomial infection and Sanitary Safety Guidelines" issued by the Korean Medical Association in 2008, the guideline "Prevention of infection by pathogens such as HIV, MRSA, SARS" were lowest article in the perception and practice level of participants. 5. Regression analysis was performed to find out the factors affecting perception and performance of the participants. The regression model showed significant difference in the regression model of the working years. (p < 0.05) 6. In order to examine the effect of the variables on the perception and practice of the infectious guideline, the mediated effect of the knowledge and education level according to the years of working, age, education degree was found to be significant only in the education degree variable. (p < 0.05) In conclusion : in order to improve the perception and practice of infectious control of Korean medicine doctors, it is necessary to include the contents of infection management as essential education during the continuing education of Korean medicine association.

일부 직업인의 건강증진생활양식에 영향을 미치는 요인 연구 (A Study on the Factors Affecting Health Promoting Lifestyles of Some Workers)

  • 이은경;안병상;유택수;김성천;정재열;박용신;장두섭;송용선;이기남
    • 대한예방한의학회지
    • /
    • 제4권2호
    • /
    • pp.119-141
    • /
    • 2000
  • The current industrial health service is shifting to health improvement business with 1st primary prevention-focused service from secondary and tertiary prevention-focused business, and Oriental medicine can provide such primary prevention-focused service due to the characteristics of its science. In particular, the advanced concept of health improvement can match the science of health care of Oriental medicine. Notably, what is most important in health improvement is our lifestyle, This does not underestimate the socio-environmental factors, which have lessened their importance due to modernism. The approach of Oriental medicine weighs more individuals' lifestyle and health care through self-cultivation. This matches the new model of advanced health business. Oriental medicine is less systemized than Western medicine, but it can provide ample contents that enhance health. If we conceive health-improvement program based on the advantages provided by these two medical systems, this will influence workers to the benefit of their health. Also, health Program needs to define factors that determine individual lives, and to provide information and technologies essential to our lives. The Oriental medicine approach puts more stress on a subject's capabilities than it does on the effect his surrounding environment can have. This needs to be supported theoretically by not only defining the relations between an individual's health state and his lifestyle, but also identifying the degree to which an individual in the industrial work place practices health improvement lifestyle . This is the first step toward initiating health-improvement business . In order to do this, this researcher conducted a survey by taking random samplings from workers, and can draw the following conclusions from it. 1 The sampled group is categorized into', by sender, female 6.6%, and male 93.4%, with males dominant; by marriage status , unmarried 43.9% and married 55.6%, with both similar percentage, and, by age, below 30, 48.4%, between 30 and 39, 27.4%, between 40 and 49, 18.2%, and over 50, 6.0%. The group further is categorized into; by education, middle school or under 1.7%, high school 30.5%, and junior college or higher 65.8% with high school and higher dominant: and by income, below 1.7 million won 24.2%, below 2.4 million won 14.8%, and above 2.4 million 6.3% Still, the group by job is categorized into collegians with 23.9%, office worker with 10.3%, and professionals with 65.8% , and this group does not include workers engaged in production that are needed for this research, but mostly office workers . 2. The subjects selected for this survey show their degree of practicing health-improvement lifestyle at an average of 2.63, health management pattern at 2.64, and health-related awareness at 2.62 The sub-divisions of health-improvement lifestyle show social emotion (2.87), food (2.66). favorite food (2.59), and leisure activities (2.52), in this order for higher points. It further shows health awareness (2.47) and safety awareness (2.40), lower points than those in health management pattern . 3. In the area of using leisure time for health-improvement, males, older people, married, and people with higher income earn higher marks. And, in the area of food management, the older and married earn higher marks . In the area of favorite food management, females, lower-income bracket, and lower-educated show higher degree of practice , while in the area of social emotion management, the older. married, and higher-income bracket show higher marks. In addition, in the area of health awareness, the older, married, and people with higher-income show higher degree of practice. 4. To look at correlation by overall and divisional health-improvement practice degree , this researcher has analyzed the data using Person's correlation coefficient. The lifestyle shows significant correlation with its six sub-divisions, and use of leisure time, food, and health awareness all show significant correlation with their sub-divisions. And. the social emotion and safety awareness show significant correlation with all sub-divisions except favorite food management.

  • PDF