• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.99-108
• /
• 2015

The embedded microcontroller which is operated by the logic gates synchronized on the clock pulse, is gradually used as main controller of mission-critical systems. Severe electrical situations such as high voltage/frequency surge may cause malfunctioning of the clock source. The tolerant system operation is required against the various external electric noise and means the robust design technique is becoming more important issue in system clock failure problems. In this paper, we propose on-chip backup clock change architecture for the automatic clock failure detection. For the this, we adopt the edge detector, noise canceller logic and glitch-free clock changer circuit. The implemented edge detector unit detects the abnormal low-frequency of the clock source and the delay chain circuit of the clock pulse by the noise canceller can cancel out the glitch clock. The externally invalid clock source by detecting the emergency status will be switched to back-up clock source by glitch-free clock changer circuit. The proposed circuits are evaluated by Verilog simulation and the fabricated IC is validated by using test equipment electrical field radiation noise

• Journal of Korean Society of Transportation
• /
• v.31 no.2
• /
• pp.45-59
• /
• 2013

This study deals with the comparative analysis between two freight demand estimation methods : Unimodal O/D based method and P/C based method. The data of access/egress truck trips has been omitted from the Korean freight unimodal O/D of KTDB. This is because KTDB's unimodal O/D has not marked the series of unlinked trips down as the whole freight intermodal transport and surveyed only the main-haul trips of them. For these reasons, freight intermodal transport mechanism has not been analysed perfectly with Korean unimodal O/D data. This study tries to estimate P/C table of Korean Import/Export container freight and develop the MCC(Multimodal Channel Choice) model. Then, comparing unimodal O/D based method and P/C based method in terms of the switch commodities between production point(the initial point of freight transport) and consumption point(the terminal point of freight transport), unimodal commodities, and commodities on links is conducted. The results show that the P/C based method is able to simulate the freight intermodal transport.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5513-5521
• /
• 2015

There is an operational efficiency problem about wayside equipment applied to the domestic low-density branch as the equipment has been installed and operated similarly in the mainline. On-board oriented train control system, which has been developed for train safety and operation efficiency, ensures safe train operation without expensive ground control signal devices. Such system consists of on-board control system, wayside control system, and local control system. In this paper, the details of tests such as suitability test, communication test, and interface test are described by installing the on-board control system and wayside control system in field. Installation tests include checking power, voltage, cable connection, LED status, etc. Field applicability of the developed system is also verified through the dynamic operation tests with diverse scenarios, which are performed on the virtual line similar to the real environment including switch machine and level crossing gate. Dynamic operation tests were conducted for total 7 scenarios, and several tests were repeated for each scenario. The elapsed time for each operation was computed by analyzing main process log, and we could check that each operation was accomplished within several seconds. Furthermore, the developed system was verified through field test with an accredited institute, and testing certificates were issued.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.21 no.4
• /
• pp.21-28
• /
• 2022

This study analyzes the reality of the overall operating system, such as recognition and satisfaction with school field support work system of the Education Facilities Management Center, recognition level of restructuring of work areas, and the direction of improvement for school facility maintenance support in various types of future learning environments. To analyze the problem of this study, a survey was conducted on 290 education administrative officials in Gyeonggi-do. First, school site awareness and work performance satisfaction of the Educational Facilities Management Center were evaluated as "below average," and it is necessary to improve the qualitative work area that is practically helpful to schools. Second, in the area of organizational operation, it is desirable to avoid simple tasks with a low evaluation of "below average" and to switch to an operating system that improves efficiency. Third, the need for the facility environment area (professionalism, safety) was the highest, but the center's ability and work processing level were evaluated very low as "below average," so it is urgent to improve the center's capacity. Fourth, in the area of social and educational policy change, the center received a high score for the need for access from the perspective of a learning environment linked to future education. Therefore, a policy review on the restructuring and improvement of work areas suitable for this is necessary.