• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.133-141
• /
• 2015

This study tried to identify the problems associated with the posture to be analyzed and tried to suggest guidelines for MSDs(Musculoskeletal Disorders) evaluation based on working posture. A total of 50 jobs from 3 different types of industries(electronics, hospitals, automobiles) were used for MSDs evaluation study which was done by 6 observers. Two indexes were applied to identify the problem in this study which were percentage of agreement and counter-time-error rate. Specifically, 'counter-time-error rate' represented a degree of consistency in terms of selecting the posture to be analyzed time after time. Main results of the study were as follows; 1) The average percentage of agreement for representative posture for whole body was relatively higher than that for representative postures for individual body parts, 2) The counter-time-error rate(%) has been reduced as the evaluation process has repeated for the same job. 3) The counter-time-error rate(%) for electronics, hospitals, and automobiles were 63.4%, 61.2%, and 67.3% respectively. 4) The counter-time-error rate(%) for the job with the work cycle of 0.5 to 2 minutes were lower than that of the jobs with the work cycles less than 0.5 minute or greater than 2 minute. 5) The work cycles and the number of trials had significant effects on counter-time-error rate while the types of industries did not have significant effects on counter-time-error rate. Some guidelines could be prepared from the results of the study. Probably, there should have an extension in terms of form and matter for this study in order to have more practical output.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.4
• /
• pp.77-83
• /
• 2009

The purpose of this study was to examine the relative effectiveness of immediate feedback and informational prompt on safe sitting behaviors that may cause VDT syndromes. Participants were three white color workers and an ABCB within-subject design was adopted. Safety Posture System was developed specifically for the present study. The system could detect participants' unsafe sitting postures using sensors and provide feedback and prompt on the computer monitors. The results indicated that both immediate feedback and informational prompt considerably increased safe sitting behaviors. More importantly, the immediate feedback was more effective than the informational prompt in increasing safe sitting behaviors.

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.148-153
• /
• 2005

Computer dominated jobs and industrial automation have rapidly created work-related musculoskeletal disorders(WMSDs) and WMSDS are expanding to employee of other general industry. Specific risk factors associated with WMSDs include repetitive motion, heavy lifting, forceful exertion, contact stress, vibration awkward posture and rapid hand and wrist movement. The purpose of this paper is to analyze the effects of the neck muscle workload according to posture(joint angle) and load weight. Seven male students participated in this study. To analyze neck muscle workload was studied on electromyographic(EMG) activity for sternocleidomastoid and trapezius, was subjectively rated using a Borg's CR-10 scale. ANOVA showed that the CR-10 ratings and most EMG root-mean-square (RMS) value were statistically significant improvement according to posture(joint angle) and load weight. The results of this study indicate the joint angle and weight of neck muscle workload to provide safe working conditions. To reduce the large number and severity of WMSDs employees have been experiencing, we need to redesign the job in workplace to identify and control hazards that are reasonably likely to be causing or contributing to the WMSDs.

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.329-341
• /
• 2008

The psychosocial stress and musculoskeletal disorders(MSDs) have been one of major health problems for hospital workers. This study tried to understand the relationship between symptoms associated with MSDs and risk factors such as working posture, job stress, psychosocial stress and fatigue. A total number of 655 hospital workers participated in this study. Specifically, REBA was applied for evaluating working posture and a checklist prepared by KOSHA(Korean Occupational Safety and Health Agency) was used for symptom survey. A questionnaire from KOSHA was also used for collecting data associated with job stress, psychosocial stress and fatigue. All these data were formulated and modeled by path analysis which was one of major statistical tools in this study. Specifically, path analysis for the data we collected came up with several major findings. The risk scores from working posture based on REBA had indirect effects via fatigue factor(MFS) as well as direct effects on symptoms. The factors associated with job stress(KOSS) and psychosocial stress(PWI-SF) had significant effects on symptoms. Specifically, indirect effect of job stress factors via fatigue factors(MFS) had bigger than that of direct effect of job stress on symptom.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.314-320
• /
• 2019

Background: Sitting posture may be related to risk factors, including inadequate weight-bearing support, particularly when maintained for long periods. Considering that body weight is loaded in a closed support system composed of the seat, backrest, floor and working surface, the aims of the present study were to describe the development of an ergonomic sitting workstation to continuously record weight-bearing at the seat, chair, backrest, work surface, and floor and to test its measurement properties: reproducibility, criterion-related validity, and sensitivity. Methods: Rigid bodies (1 to 30 kg) and participant weights were recorded to evaluate the workstation measurement properties. Results: Rigid body tests showed variation values less than 0.050 kg on reproducibility test and errors below 5% of measured value on criterion validity tests. Participant tests showed no statistically significant differences between repeated measures ($p{\geq}0.40$), errors were less than 2% of participant weights an sensitivity presented statistically significant changes (p = 0.007). Conclusion: The sitting workstation proposed showed to be reliable, valid and sensitive for use in future ergonomic studies to evaluate the sitting posture.

• Journal of the Ergonomics Society of Korea
• /
• v.24 no.1
• /
• pp.37-41
• /
• 2005

Work related musculoskeletal disorders became a hot issue in Korea since many workers reported musculoskeletal disorder problems. Korean government enacted a law to require companies to take measures to prevent musculoskeletal disorders at work. This study found workers' WMSDs symptoms in squatting work posture which the rate of the occurrence was relatively high among work types to bring about WMSDs in railroad cars maintenance works and analyzed to compare the hazardous jobs in the industrial safety health law in South Korea with the caution jobs in Washington State in U.S. The hazardous jobs in South Korea were more effective in squatting work posture from this study result and this study data will be a great help to plan and carry out an effective prevention program about WMSDs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.123-124
• /
• 2019

In the labor-intensive construction site, potential threats of the musculoskeletal diseases mainly caused by various repetitive physical tasks, vulnerable environment, and the aging of the labor worker exist. However, quantitative measuring method of construction labor worker's work posture has not been improved yet. This study proposed musculoskeletal measuring method by using wearable motion recognition sensor for quantitative evaluation and analysis of working posture of construction workers. This method is expected to be used as a basic data for posture analysis and prevention construction safety accidents, as well as physical workload and labor productivity analysis by labor work type.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.81-88
• /
• 2011

The goal of this study was to determine whether food industry workers are exposed to musculoskeletal loads due to the work time, frequency, awkward postures and inappropriate workspace design. Three catering workers were evaluated based on job analysis and posture analysis. The results showed that the four most time-consuming tasks were arranging(17%), cooking(16%), handling before cooking(15%) and cutting(15%), and the four most frequent tasks were arranging(21%), cooking(18%), handling after cooking(16%) and handling before cooking(13%). The most common posture was a standing posture(73%) with neutral back(73%), and bent head(50%), left lower arm(71%), right lower arm(78%) and right hand(60%). The comparative analysis of subtasks for the risk levels of musculoskeletal disorders was conducted using the work time, frequency and cumulative time of the postures. The 'displaying' and 'handling after cooking' showed higher risk levels than other subtasks. In addition, the height and length of the tables were evaluated to be inadequate for the workers. It can be concluded that the working environments for catering workers of restaurants should be improved due to the high cumulative time of awkward postures of upper extremities.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.2
• /
• pp.25-30
• /
• 2021

The possibility of developing musculoskeletal disorders increases with the length of service of the worker. Musculoskeletal disorders can occur when performing repetitive and forceful movements. Therefore, Cargo drivers operate repeatedly in the wrong posture for a long time. When loading and unloading a cargo, the cargo driver works repeatedly with force. Cargo operators are also exposed to musculoskeletal disorders in the working environment due to poor posture and repetitive movements. In this study, we are going to conduct a study on the level of awareness and prevention of the possibility of musculoskeletal disorders in cargo drivers for long periods of time. As a result of the study, the factors that cause musculoskeletal disorders in each group can occur during the long-term operation and preparation of drivers.

• Science of Emotion and Sensibility
• /
• v.4 no.1
• /
• pp.53-60
• /
• 2001

As a part of HMS(Human-Machine System), the car is very important thing in common life. It is also a significant part to study on the controllers of car that is intentively related with all sensibilities during driving. There are lots of controllers on seating buck of the car. However, there are few study on the sensibility analysis of them. Most of all, the foot controller could be easily overlooked because it could be invisible. This study was based on relationship that the controllers fitted to the driving posture in the drivers' sensibility difference of two transmission modes, automatic and manual transmission. The results show the driver's preference driving posture and sensibility in two kinds of transmission cars. Consequently, it should be designed the seating buck for two different types respectively to be taken comfort driving posture and improve the safety for drivers. Also, it could reduce the fatigue and discomfort in the task of driving. The design of the controllers strongly effects on the drivers' response time. hereby this study was accessed to the sensibility of Korean with analyzing the relationship, quantitative data, and sensibility difference between two kinds of transmission cars.