• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.16-26
• /
• 2020

Improving operator performance in complex and time-critical situations is critical to maintain plant safety and operability. These situations require quick detection, diagnosis, and mitigation actions to recover from the root cause of failure. One of the key challenges for operators in nuclear power plants is information management and following the control procedures and instructions. Nowadays Digital Twin technology can be used for analyzing and fast detection of failures and transient situations with the recommender system to provide the operator or maintenance engineer with recommended action to be carried out. Systems engineering approach (SE) is used in developing a digital twin for the CEDM system to support operator actions when there is a misalignment in the control element assembly group. Systems engineering is introduced for identifying the requirements, operational concept, and associated verification and validation steps required in the development process. The system developed by using a machine learning algorithm with a text mining technique to extract the required actions from limiting conditions for operations (LCO) or procedures that represent certain tasks.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1874-1879
• /
• 2024

Owing to strict radiation safety management in Korean nuclear power plants (NPPs), most radiation workers receive very low radiation doses, even lower than the annual dose limit for the general public. However, the occupational dose distribution indicates that some Korean NPP workers receive a relatively higher dose than the average dose. This inequity in radiation exposure could be reduced by providing customized radiation protection measures, such as dose constraints, to workers receiving relatively higher doses. In this study, dose normalization was performed to identify the highest radiation exposure work in Korean pressurized water reactors (PWRs). The results show that most of the occupational exposure in Korean PWRs occurs during the planned maintenance period. Finally, the three highest radiation exposure tasks in Korean PWRs were identified: nozzle dam installation and removal, eddy current testing, and man-way opening and closing.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.550-557
• /
• 2024

Railway track facility management (FM) is an intricate and multifaceted discipline that necessitates precise data management and scheduling for ensuring the safety and efficiency of railway operations. Although the Industry Foundation Classes (IFC) version 4.3 has incorporated railway infrastructure into its data schema, it still falls short in catering to the specialized needs of track FM. This paper presents an exhaustive extension to the IFC schema, specifically designed to address the challenges and complexities inherent in railway track FM. A two-step approach was employed in the development of this extension. The initial phase involves the development of a Unified Modeling Language (UML)-based conceptual model, encapsulating four pivotal elements: "component" for track asset and condition identification, "action" for the related tasks during track FM, "resource" for required materials and equipment as well as involved actors, and "operation" for track operation information capturing. This conceptual model serves as an intricate blueprint, offering a comprehensive structure for various FM facets. Thus, the proposed IFC extension is developed and aligned consistently with the conceptual model, forming an integrated, interoperable data management framework that can be easily adapted into the openBIM environment. The efficacy and applicability of the proposed extension are substantiated through real-world case studies, thereby demonstrating its capability to significantly enhance data visualization, interoperability, and overall decision-making in railway track FM.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.21-30
• /
• 1999

One of the major tasks of a Police station is the management of road traffic accidents. Each police station is responsible for keeping Traffic Accident Records (TAR) which can be used as the basis of statistical analyses. Results of such statistical analyses have been applied to establishing effective traffic Plans and safety Policies at the macro level. In this Paper, we apply QFD in a way that each police station can set and implement specific policies according to the local characteristics. Cluster analysis is employed to find black spots in each local area. Poisson repression is used to identify the area specific factors related to various types of road accidents. Results of such statistical analyses are applied to QFD. Our approach is expected to contribute to reduce various types of area specific road traffic accidents.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.605-610
• /
• 2010

In order to design a touch interface for the elderly, human performance of input tasks on the touch screen was investigated by the laboratory experiment. Input times and input errors were measured in the experimental conditions that were changed according to age, key size, interkey space and input tool(finger or stylus pen). In the most of all experimental conditions, the task performance of the elderly was lower than that of the young. However, there were significantly different performance patterns between both groups. As the difficulty of task was getting higher, the task performance of the elderly was sharply decreased; pressing small key button by finger sharply increased input time and error rate, compared to that of the young. Therefore, the square key size suitable to the elderly may be over $8.0{\times}8.0mm$. While the interkey space did not influence to the input task performance of the young, the task performance of the elderly was influenced. The elderly showed big difference of task performance according to input tool. However, the young were less influenced by input tool.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.21-29
• /
• 2012

Person characteristics and the perception of organization climate affect on the performances associated with causes of job stress, and may induce various types of human errors. For incidence, a person's adaptation to organizational traits can influence on a person's performance with tasks assigned as well as job satisfaction, a change of occupation, etc. There are several evaluation methods such as an aptitude test to evaluate the suitability of department allocation. However, only person's traits such as an aptitude has been associated with department allocation and job assignment for the personnel management. This paper shows not only an evaluation result on the job-stress of the workers in nuclear power plants (NPPs), but also the relationships between the job-stress and the coincidences of group-personal, team-personal traits. Then, we systematically deduct a basic information on the factors to be considered to manage the organizational traits and job stress. We expect this result can contribute to enhance the organizational management against to the human errors as well as for the promotion of safety and efficiency of NPPs.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.142-159
• /
• 1996

Engineering of automated tools for the agro-food industries and the rural world activities have to pick up two challenges : to answer the immediate important problems related to the situation of these industries, and to imaging the tools that their professional will need next century. Creating or modifying automated tools in the next few will be made taking into account parameters either technical (environmental protection, health and safety), or social and economical (investment , employment). There will be a strong interaction with disciplines like ecology, medicine, ergonomy, psycho-sociology , etc. , The partners for such a research, tools manufactures and users, should have an early involvement in its content, in order to find rapidly the solution to the drastic problems they are meeting. On a longer term , during the next 20 years , there will be an important evolution of the rural space management and of the food processes. This will imply the emergence of new types of activities and know-how's , with lines of automated tools to be invented and developed , like : micro-system for organic localized tasks -mobile and adaptive equipments highly autonomous for natural space actions - device for perception , decision and control reproducing automatically the expert behaviors of human operators. Design of such automated tools need to overcome technological difficulties like the automation of the expert-decision process, or the management of complex design.

• Fire Science and Engineering
• /
• v.28 no.1
• /
• pp.58-63
• /
• 2014

This study was performed to propose measures to improve and secure safety in the scene activities of firefighters. First, the majority of firefighters thought that working environment and equipment in fire station were inadequate for perforeming work tasks safely. Second, influential factors threatening safe scene activities mainly arose externally such as insecure working conditions of firefighting or emergency scene. Third, improvement in working environments was pointed out as the most urgent issue to secure safety. Firefighters recognized the expansion of field workforce in system, personnel management and the foundation of hospitals for firefighters hospital in working environment, and the development and distribution of safe equipment and change and inspection of air respirator facepiece on regular basis in equipment as urgent issues to be improved.

• Journal of KIBIM
• /
• v.5 no.3
• /
• pp.19-32
• /
• 2015

For decades, the productivity issue has been a primary concern for the all stake-holders who participate in domestic construction industry. Especially, between a whole life cycle of building, the construction phase's productivity problem makes or break the entire project. In this respect, the general construction company, who accept the order and construct the building(so called General Contractor), should consider various strategies, such as schedule management, cost management, quality management, inner-crew management, etc., for the productivity improvement., and almost of these management methods have been studied for a long time. But, the researches and studies about the specialty contractor, who construct the building directly in construction site were not sufficiently complete yet. This research begins as an idea which tries to apply the BIM(Building Information Modeling) into the tasks of Specialty contractors for their productivity improvement. And for the effective application of construction BIM to specialty contractors, establish of the BIM project execution plan for them, not the fragmentary adoption of BIM. Therefore, in this paper, we develop the BIM project execution plan for the reinforced concrete companies who conduct the framework construction which located on CP(Critical Path) Especially, we model the "Construction BIM Use List for the RC Work", "BIM Application Master Process" and "BIM Application Detailed Process", and general contractor who use these BIM uses list and process models can manage various specialty contractors about schedule, cost, earned value, quality, safety and environment management systematically.

• Journal of Biomedical Engineering Research
• /
• v.44 no.5
• /
• pp.315-323
• /
• 2023

The objective of this study is to identify the selective application targets for reporting on details of supply of class 1 and 2 medical devices as part of the improvement of the reports on details of supply of medical device system, and to analyze its effectiveness. Therapeutic materials covered by health insurance and secondhand medical devices were chosen based on the transparency of health insurance coverage and the management of medical device distribution. As a result, approximately 85% of groups can be excluded from the reporting requirements compared to reporting all items under Class 1 and 2 medical devices. This is expected to enhance the efficiency of supply reporting tasks. Additionally, the information on supply details managed by the regulatory authority can be utilized for statistical analysis and periodic monitoring, serving as fundamental data for the development of medical device-related policies and research in the field of medical devices.