• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.495-499
• /
• 2010

In this paper, the regulatory guidelines for the continued operation of the CANDU reactor in Korea were introduced. Wolsong Unit 1, which is a CANDU 600 reactor in Korea, will reach its design life of 30 years in 2012. A licensee who wants to operate a nuclear power plant beyond its design life should submit reports of periodic safety reviews (PSRs) conducted on the basis of 11 safety factors. In addition, the licensee should provide the following: (1) scoping and screening results for aging management, (2) aging management program, (3) TLAA, including the continued operation term, (4) operation-experience feedback, and (5) important safety-research results. In this study, 54 regulatory guidelines for the five above-mentioned items for the CANDU reactor in Korea were developed.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.149-157
• /
• 2006

This paper suggests the design and operation of value stream mapping(VSM) applied to project management, such as R&D, IT Investment. First this study represents design methodology of VSM process using SIPOC(Supplier, Input, Process, Output, Costumer). Second, this paper considers the identification and improvement plan about non-added value time for VSM using FPC(Flow Process Chart) and PERT/CPM. Last, this paper proposes VSM scheduling method using PERT/CPM and CCPM(Critical Chain Project Management)

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2013

In this study, unattended Light Rail Transit System (K-AGT) is a general-purpose standards safety requirements of IEC 62267 based System Engineering Process (SEP) was used. Functional analysis and physical architecting for each requirements through the vehicle was classified into sub-systems, design was analyzed in terms of SE. The analysis of the proposed system engineering process, unattended train operation (UTO), driverless train operation(DTO) design of the safety measures to be used as the basis is studied.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.3
• /
• pp.251-258
• /
• 2019

This study was conducted to propose an effective port operation method in terms of the design capacity of waiting anchorage by comparing the ratio and the number of waiting anchorage according to the port operation method of Busan New Port. For this, the Arena simulation program compared the rates of waiting vessels according to the application of the multi-user terminal, liner terminal and hybrid liner terminal operation methods. As a result, analysis suggested the necessary anchorage space can be reduced to about 18 % when using the multi-user terminal operation method and about 15.6 % when using the hybrid liner terminal operation method, as compared with the liner terminal operation method. Specifically, it was effective to apply the multi-user terminal operation method in terms of the anchorage capacity to be designated to Busan New Port. This study can apply to the designation of the new anchorage in the Busan New Port by reflecting the contents of the design of the anchorage in accordance with the port operation method.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.4
• /
• pp.39-51
• /
• 2006

Based on the practical process engineering design and commissioning and startup operation experiences focused on chemical process safety, the comprehensive review of engineering design and installation of the thermal relief valve with its surrounding facility in a chemical plant piping system is provided to enhance the better understanding of the piping system of characteristics of thermal relief valve which is comprised of the theoretical approach, correlation in terms of temperature and pressure increase caused by external heat supply in a piping system, consideration of thermal relief valve engineering design, pressure relieving system of serial thermal relief valves and exception of their installation. It is earnestly suggested that following topic should be implemented during thermal relief valve engineering design, installation and normal operation as well.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.3
• /
• pp.13-23
• /
• 2002

The use of industrial robots has been one of the most important innovations in production technology in recent years. It is true that robotic techniques, as applied to hazardous operation in industry, have reduced the risk of injury and occupational disease among workers. However, new types of occupational safety and health risks, associated with unpredictable motion patterns and erratic idle times and serious injuries and deaths have occurred due to operator misperception of these robot design and performance characteristics. This paper provides an overview of ergonomic and safety issues which are important in the design of robotic workspaces. Particularly, this study uses MORT(Management oversight and risk tree analysis)as the system's safety technique applied to robotics.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.273-280
• /
• 2001

In this study, a comparison between the structural design criteria for a catenary system with the maximum design speed of 100km/h and that of 300km/h was performed in order to establish that of 200km/h. According to the result, catenary design criteria for 300km/h operation is more conservative than that for 100km/h operation. This result shows that higher wind pressure and safety factor are adopted to catenary design for 300km/h operation. So, for the purpose of the economic structural design for catenary system, it is necessary to review the adoption possibility of catenary system for 100km/h operation first. In order to review the adoption possibility for catenary system for 100km/h operation, design criteria for 300km/h operation should be chosen for safer catenary structure.

• Nuclear Engineering and Technology
• /
• v.40 no.4
• /
• pp.277-284
• /
• 2008

Recently, the long-term operation of a nuclear power plant beyond its licensed term has become a worldwide trend as long as the safety of the plant is maintained in the extended period. Kori Unit 1, the oldest PWR in Korea, is the foremost example of this type of long-term operation in Korea. Comprehensive technical evaluation of the long-term operation of this plant was completed to confirm the overall safety of the plant. The technical evaluation included a review of PSR results, an assessment on aging management programs and time limited aging analyses, and a statement of radiological impact on the environment. Based on all of the results of the technical evaluation activities, Kori Unit 1 was approved to operate for an additional 10 years beyond its original design life of 30 years.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.975-979
• /
• 2008

Since tram has the advantages to reduce construction cost of infrastructure, to improve accessibility of passengers, and to offer visual pleasures, nowadays, it is one of light rails attracting public attention. Tram can be classified into two groups, one is a conventional steel-wheeled type, and the other is a rubber-tired type (bi-modal tram). The bi-modal tram propelled by the serial CNG hybrid propulsion unit has been developing since 2003 in Korea, which can realize both scheduled operation of railway and route flexibility of bus. Because the bimodal will be operated on both railway mode and bus mode, however, specific criteria and regulations for its design, certification, construction, operation and maintenance have not been determined definitely yet. In consideration of mobility enhancement for the old and the handicapped, motor vehicle safety standard and urban transit (railway vehicle) safety standard, several design specifications were proposed for car body and interiors of the bimodal tram vehicle. The design specifications proposed in this paper can be expected to promote passengers' comfort and safety, operation efficiency of the bimodal tram.

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.260-266
• /
• 2015

Twenty sodium-cooled fast reactors (SFRs) have provided valuable experience in design, licensing, and operation. This paper summarizes the important safety criteria and safety guidelines of intermediate sodium systems, steam generators, decay heat removal systems and associated construction materials and in-service inspection. The safety criteria and guidelines provide a sufficient framework for design and licensing, in particular by new entrants in SFRs.