• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.71-78
• /
• 2021

Since most functions of modern aircraft are controlled by software, software errors are directly related to aircraft safety. The criterion in Chapter 15 of the MIL-HDBK-516C addresses safe development and verification of military aircraft software. As the U.S. Air Force repeatedly experienced non-compliance with Chapter 15 criterion of the MIL-HDBK-516C, it published an Airworthiness Circular (AC-17-01) as a guide to meeting the criterion. In this paper, Chapter 15 of MIL-HDBK-516C, AC-17-01 and the SW Qualification Guideline (DO-178C) as applied by the Federal Aviation Administration are compared and analyzed. For the analysis, a matching ratio formula between the MIL-HDBK-516C criteria specified in AC-17-01 and the DO-178C specified in MIL-HDBK-516C criteria is defined. The sections that satisfy MIL-HDBK-516C criterion are derived when AC-17-01 or DO-178C matches. Based on the analysis results, the aircraft software development process is established and examples of application of Chapter 15 of MIL-HDBK-516C are addressed.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.161-169
• /
• 2022

The government [3] specifies steel pipe scaffolding as conventional scaffolding and is promoting the installation of system scaffolding, an integrated work platform, and avoidance of the use of steel pipe scaffolding as much as possible. However, in places where equipment cannot enter, such as power plants and plant sites, places the structure is complex, and places where scaffolding cannot be stacked on the ground, there is no choice but to install steel pipe scaffolding. When installing steel pipe scaffolding on an H-beam structure at a high place, the performance of the steel frame clamp is very important in order to form a work space which workers can work safely. In this study, the displacement magnitude and tensile load of members in each installation direction of the clamp for steel frame were verified through performance tests and structural analysis modeling. As a result, it was confirmed that the performance for each installation direction satisfies the safety certification standard tensile load of 10,000N. Although the performance value is satisfactory, deformation of the attachment pressing bolt was verified and was confirmed to have minimal deformation. Thus, to ensure the load is properly to the attachment body, the clamp for a steel frame must be installed in the direction in which the load is transmitted.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.117-132
• /
• 2022

The purpose of this study is to analyze factors that affect road users' acceptance of fully autonomous vehicles (level 4 or higher). A survey was done with drivers of general cars and pedestrians who share roads with fully autonomous vehicles. Five acceptability factors were selected: trust towards technology, compatibility, policy, perceived safety, and perceived usefulness. The effect on behavioral intention was analyzed using structural equation modeling (SEM). The perceived safety and trust towards technology were found to be very important in the acceptance of fully autonomous vehicles, regardless of the respondent, and policy was not influential. Compatibility and perceived usefulness were particularly influential factors for drivers. In order to improve the acceptance by road users, securing technical completeness of fully autonomous vehicles is important. Certification and evaluation of the safe driving ability of fully autonomous vehicles should be thoroughly performed, and based on the results, it is necessary to improve the perception by road users. It is necessary to positively recognize fully autonomous vehicles through education and publicity for road users and to support their smooth interaction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.182-192
• /
• 2022

Motorcycle accidents are increasing at an average annual rate of 10.01%, and fatalities are also increasing by 2.64%. Enforcement cameras are installed to enforce safe driving of more-than or equal-to four-wheeled vehicles on the road. Even though the main purpose of this enforcement camera is to disencourage the speed violation of all types of vehicle, one cannot expect complete enforcement by these cameras. In particular, enforcement of the motorcycle should rely on on-site activities through the input of on-site personnel. Recently, to discourage the illegal acts of motorcycling, the National Police Agency introduced the 'National Police Agency SMART National Report'. However, it is necessary to prepare an appropriate practical plan to maximize the effect of enforcement requiring continuous manpower management. This study proposed four types of rider certification IDs for delivery motorcycles. These IDs are institutional devices to manage delivery motorcycle riders. In addition, a experiment on enforcement was conducted using those license ID systems for delivery motorcycles. This experiment confirmed through the image-processing program (D-MESO) if one of the systems was possible to implement for enforcement on the delivery motorcycle rider's license.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.13-27
• /
• 2015

A systemic review on the factors affecting food catering hygiene was conducted to provide information for risk management of food catering in Korea. In total 47 keywords relating to food catering and food hygiene were searched for published journals in the DBpia for the last decade (2005-2014). As a result, 1,178 published papers were searched and 142 articles were collected by the expert review. To find the major factors affecting food catering and microbial safety, an analysis based on organization and stakeholder were conducted. School catering (64 papers) was a major target rather than industry (5 pagers) or hospitals (3 papers) in the selected articles. The factors affecting school catering were "system/facility/equipment (15 papers)", "hygiene education (12 papers)", "production/delivery company (6 papers)", food materials (4 papers)" and "any combination of the above factors (9 papers)". The major problems are follow. 1) The problems of "system/facility/equipment" were improper space division/separation, lack of mass cooking utensil, lack of hygiene control equipment, difficulty in temperature and humidity control, and lack of cooperation in the HACCP team (dietitian's position), poor hygienic classroom in the case of class dining (students'), hard workload/intensity of labor, poor condition of cook's safety (cook's) and lack of parents' monitoring activity (parents'). 2) The problem of "hygiene education' were related to formal and perfunctory hygiene education, lack of HACCP education, lack of compliance of hygiene practice (cook's), lack of personal hygiene education and little effect of education (students'). 3) The problems of "production/delivery company" were related to hygiene of delivery truck and temperature control, hygiene of employee in the supplying company and control of non-accredited HACCP company. 4) The area of "food materials" cited were distrust of safety regarding to raw materials, fresh cut produces, and pre-treated food materials. 5) In addition, job stability/the salary can affect the occupational satisfaction and job commitment. And job stress can affect the performance and the hygiene practice. It is necessary for the government to allocate budget for facility and equipment, conduct field survey, improve hygiene training program and inspection, prepare certification system, improve working condition of employees, and introducing hygiene and layout consulting by experts. The results from this study can be used to prepare education programs and develop technology for improving food catering hygiene and providing information.

• Food Science of Animal Resources
• /
• v.32 no.3
• /
• pp.330-338
• /
• 2012

HACCP is a preventative food safety management system whose application is highly encouraged worldwide. In this study, the workers' demands for the application of HACCP system at the meat retail shops were surveyed. According to a factor analysis on the demands of the application of HACCP system, the results could be classified into three factors: HACCP support, HACCP promotion and education, and generic livestock product safety management. Items on demands showed higher results for HACCP support (3.91 point) than for HACCP promotion and education (3.83 point) or generic livestock product safety management (3.72 point). The application of HACCP system was more demanded by HACCPcertified retailors with 4.11 point than the non-HACCP-certified ones (3.57 point). From the analysis of items on demands, 'governmental promotion of the general public livestock HACCP; (p<0.001) was the highest demand item by the HACCPcertified retailors and 'HACCP certification support for the government's investment' by the non-HACCP-certified ones (p<0.05). The strengthening of governmental support for the application of HACCP at meat retail shops as well as active HACCP promotion and education aiming at general public was demanded. With this, the establishment of HACCP system and the improvement of safety management level at the area of meat retail shops could be achieved, contributing to the increase of consumers' satisfaction.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.1
• /
• pp.59-75
• /
• 2020

This study is a case study that applied 'UNDRR's Urban Disaster Resilience Scorecard', an evaluation tool necessary for Incheon Metropolitan City to be certified as an international safe city. I would like to present an example that the results derived from this scorecard contributed to the Incheon Metropolitan City Disaster Reduction Plan. Of course, the Disaster Resilience Scorecard can't provide a way to improve the resilience of every disaster facing the city. However, it is to find the weakness of the resilience that the city faces, and to propose a solution to reduce the city's disaster risk. This is to help practitioners to recognize the disaster risks that Incheon Metropolitan City faces. In addition, the solution recommended by UNDRR was suggested to provide resilience in areas vulnerable to disasters. It was confirmed that this process can contribute to improving the disaster resilience of Incheon Metropolitan City. UNDRR has been spreading 'Climate Change, Disaster-resistant City Creation Campaign', aka MCR (Making Cities Resilient) Campaign, to cities all over the world since 2010 to reduce global cities' disasters. By applying the disaster relief guidelines adopted by UNDRR, governments, local governments, and neighboring cities are encouraged to collaborate. As a result of this study, Incheon Metropolitan city's UN Urban Resilience Scorecard was evaluated as a strong resilience field by obtaining scores of 4 or more (4.3~5.0) in 5 of 10 essentials; 1. Prepare organization for disaster resilience and prepare for implementation, 4. Strong resilience Urban development and design pursuit, 5. Preservation of natural cushions to enhance the protection provided by natural ecosystems, 9. Ensure effective disaster preparedness and response, 10. Rapid restoration and better reconstruction. On the other hand, in the other five fields, scores of less than 4 (3.20~3.85) were obtained and evaluated as weak resilience field; 2. Analyze, understand and utilize current and future risk scenarios, 3. Strengthen financial capacity for resilience, 6. Strengthen institutional capacity for resilience, 7. Understanding and strengthening social competence for resilience, 8. Strengthen resilience of infrastructure. In addition, through this study, the risk factors faced by Incheon Metropolitan City could be identified by priority, resilience improvement measures to minimize disaster risks, urban safety-based urban development plans, available disaster reduction resources, and integrated disasters. Measures were prepared.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1535-1544
• /
• 2010

This study was conducted to evaluate the sanitation management practices in food manufacturing companies that supply food and food ingredients to school foodservice operations. Subjects consisted of 34 food manufacturing factories located in the Daegu and Gyeongbuk areas. Sanitation performance was self-evaluated using a Likert 5-point scale. The total mean score for factory sanitation performance was 4.72. Scores for perceived sanitation management performance in the factories were as follows: management of material (4.90); personal hygiene (4.78); management of work (4.71); management of workplace and vicinity (4.68); and food and raw material transportation (4.67). Participating companies that had HACCP certification programs scored high on the following sanitation inspection items: washing and sanitation guides, adequate equipment for correct hand washing, and sanitation of raw material delivery vans. The mean frequency for employee sanitation education was 2.8 times per month. Factory managers believed that their sanitation management programs kept their food safe and that the food was produced and delivered with a high degree of safety. However, they thought that food sanitation standardization was needed in order to supply high-quality and safe food items. In terms of traceability, 58.8% of the raw materials were traceable and 61.8% of the manufactured products were traceable. Sanitation management performance scores for the participating food manufacturing companies were high, although the soybean sprouts processing companies had comparatively low scores. Management reinforcement of employee sanitation education and a sense of duty and pride among factory employees will promote adequate and appropriate sanitation management performance for food safety and quality in factories that supply food and ingredients to school foodservice operations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.834-846
• /
• 2017

An increase in the number of retiring experienced pilots as well as drastic graying of new pilots will raise the problems on deepening imbalance of supply and demand of pilots over the next 7 years, which could entail fatal problems for the safety of harbour pilotage. In this study, the improvement plan of legal system to ease imbalance between supply and demand of pilots and help secure more experienced pilots has been proposed. A current state survey and analysis, statistical analysis, questionnaire survey on foreign countries, in-depth consultation with experts, etc., were all carried out to support this research. The conclusions of this study are, firstly, to propose an amendment that the minimum requirement of 5 years of seagoing service as a master to sit for the pilot exam should be relaxed to 2 years(which must include at least 1 year of master's seagoing service within the most recent 5 years) but the minimum requirement of 1 year of pilotage service should be reinforced to 1 year and 6 months to obtain a higher class of pilot certificate. Secondly, it is proposed that an amendment offering an additional 1 point per year over the minimum period of 2 years of seagoing service as a master should be added, with a maximum of 10 points in order to rationalize the additional incentive point system. In order to secure experienced pilots and resolve the legal conflict between the certificate revalidation system and the retirement system, it is also proposed that an amendment be passed revoking the retirement system and limiting the validity of any new certificates only to 68 years of age when issuing or revalidating a certificate, if an applicant is over a certain age. Promotional work, such as collecting opinions from interested parties and generating positive public awareness, should be carried out in the future. It will also be necessary to conduct a study on the training pilot exam system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.902-909
• /
• 2023

This study evaluated the performance test of a small-sized LTE-Maritime(LTE-M) transceiver that was developed and promoted to expand the use of intelligent maritime traf ic information services led by the Ministry of Oceans and Fisheries with the aim of supporting the prevention of maritime accidents. Accoriding to statistics, approximately 30% of all marine accidents in Korean water occur with ships weighing less than 3 tons. Therefore, the blind spots of maritime safety must be supplemented through the development of small-sized transceivers. The small transceiver may be used in fishing boats that are active near coastal waters and in water leisure equipment near the coastline. Therefore, verifying whether sufficient performance and stable communication quality are provided is necessary, considering the environment of their real usage. In this study, we reviewed the communication quality goals of the LTE-M network and the performance requirements of small-sized transceivers suggested by the Ministry of Oceans and Fisheries, and proposed a test plan to appropriately evaluate the performance of small-sized transceivers. The validity of the proposed test method was verified for six real-sea areas with a high frequency of marine accidents. Consequently, the downlink and uplink transmission speeds of the small-sized LTE-M transceiver showed performances of 9 Mbps or more and 3 Mbps or more, respectively. In addition, using the coverage analysis system, coverage of more than 95% and 100% were confirmed in the intensive management zone (0-30 km) and interesting zone (30-50 km), respectively. The performance evaluation method and test results proposed in this paper are expected to be used as reference materials for verifying the performance of transceivers, contributing to the spread of government-promoted e-navigation services and small-sized transceivers.