• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.979-988
• /
• 2014

본 연구는 간호사들이 인식한 안전 분위기와 업무환경을 포함한 조직의 특성과 투약오류보고장애요인간의 관련성을 검증하기 위한 연구이다. 수정된 안전 분위기, 업무환경, 투약오류보고장애 문항을 활용하여 7개 병원의 334명의 간호사들을 대상으로 하여 조사하였다. 자료수집기간은 2012년 9월 한달 간이었고, 서술적 통계, Pearson correlation coefficient, canonical correlation을 적용하였다. 조직의 특성은 투약오류보고장애와 세 가지 유의한 상관이 있었다. 첫 번째 정준상관계수는 .50(Wilks' ${\lambda}$=0.61, df=32, p<.001)이었고, 두 번째는 .35(Wilks' ${\lambda}$=0.81, df=21, p<.001), 세 번째는 .22(Wilks' ${\lambda}$=0.93, df=12, p=.018)이었다. 첫 번째 정준상관은 높은 안전 분위기와 업무환경이 오류보고에의 두려움을 제외한 투약오류보고와 관련이 있었다. 두 번째 식은 '의료인간의 안전 분위기'의 높은 지각과 높은 '병원에의 간호사 참여'와 '인적 자원의 적절성'은 낮은 '불안감'과 '행정자들의 반응'과 관련이 있었다. 투약오류보고장애를 위한 전략과 안전 분위기와 업무환경과 같은 조직의 특성의 진보가 적용되어야 한다.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.113-124
• /
• 2012

PURPOSES : In This study two different concrete barrier systems have been proposed to be established at the small vehicle driveway. One is for median barrier, and the other is for roadside barrier. METHODS : In order to determine the suitable shape of barrier, the impact parameters including vehicle weight, impact angle, impact velocity and impact level have been analyzed. The real crash test has been carried out with 0.9 ton and 2.5 ton vehicles, respectively by using the 2m segment type concrete barriers connected by steel plates that are totally 40m barrier systems. RESULTS : The numerical results obtained by LS/DYNA-3D software are compared with real crash tests from the viewpoints of vehicle stability, vehicle trajectory, occupant risk, etc. CONCLUSIONS : From the above results, the dynamic performance of proposed barrier systems satisfies the specification of Korean Code for roadside safety structures.

• 자동차안전학회지
• /
• 제8권3호
• /
• pp.33-38
• /
• 2016

Recently, development in vehicle safety could increase interest in children's safety in vehicle collisions. But the research of children safety in vehicle collisions is not being conducted as many as that of adult's. Especially the study for the vehicle crash was not much. This study focused on the comparison of child safety between test protocols to evaluate children's safety in crash test. Injuries of Q6 and Q10 dummy were evaluated using FFRB (Full frontal rigid barrier) test and 40% ODB (Offset deformable barrier) test with one model vehicle. Even though the limit number of test, the tendency of injury criteria of Q6 and Q10 dummy between the test protocols was not conformed but injury criteria of Q6 and Q10 were not same between FFRB and 40% ODB.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.75-84
• /
• 2018

PURPOSES: This study analyzes feasibility for application white pavement markings in the roadways with median barrier. METHODS : By reviewing numerous relevant laws, standards, and operational cases, the white pavement markings' excellence was demonstrated. Driver's behavior was analyzed through a virtual driving experiment using driving simulator and field tests. RESULTS:First, white pavement markings are superior to yellow pavement markings in terms of visibility, economics, and safety. Second, as a result of virtual driving experiment, the color of line in the roadway with median barrier didn't affect the driver's behavior such as the average vehicle speed, the distance bias in the lane and the separation distance from the centerline. Third, field test demonstrated that the driver tended to recognize the median barrier as an obstacle. In addition, the central driving ratio in the lane was increased due to improving the visibility of line at night in case of the white pavement markings. CONCLUSIONS : The application of white pavement markings in the roadways with median barrier can enhance traffic safety by improving the visibility of line at night.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.734-740
• /
• 2023

Hydrogen emphasis on safety management due to its high potential for accidents from wide explosive limits and low ignition energy. To prevent accidents, appropriate explosion-proof electrical equipment with installed to safe management of ignition sources. However, designing all facilities with explosion-proof structures can significantly increase costs and impose limitations. In this study, we optimize the barrier to effectively control the initial momentum in case of hydrogen release and form the control room as a non-hazardous area. We employed response surface method (RSM), the barrier distance, width and height of the barrier were set as variables. The Box-Behnken design method the selection of 15 cases, and FLACS assessed the presence of hazardous area. Analysis of variance (ANOVA) analysis resulting in an optimized barrier area. Through this methodology, the workplace can optimize the barrier according to the actual workplace conditions and classify reasonable hazardous area, which is believed to secure safety in hydrogen facilities and minimize economic burden.

• 복합신소재구조학회 논문집
• /
• 제4권2호
• /
• pp.25-30
• /
• 2013

In this study a hybrid safety barrier system consisting of steel rail and carbon fiber reinforced polymer (CFRP) post is considered. W hile CFRP post is selected for impact energy reflection due to its high strength, steel rail is selected for impact energy absorption due to its high ductility. A numerical model considering the elastoplastic behavior of steel is formulated to simulate the dynamic responses of the hybrid system subject to an impact load. A hybrid roadside guard rail system of steel rail and CFRP post is proposed and analyzed with a case study. The numerical model for the hybrid roadside guard rail system is used to find optimized design of the proposed hybrid system.

• 한국건설관리학회논문집
• /
• 제9권1호
• /
• pp.143-154
• /
• 2008

다양한 제반 위험요소가 상존하는 고속도로 교통안전시설의 안전에 대한 사회적 관심증가로 인하여 교통안전시 설에 대한 체계적인 성능, 비용 및 효과 분석 프로세스가 요구되어지고 있다. 교통안전시설은 도로사용자의 직 간접적인 사고위험성이 상존하는 중요한 시설물임을 고려하여 위험도의 정량적 평가에 대한 고려가 필수적이다. 본 연구에서는 교통안전시설의 가치분석 수행시 정량적 위험도분석 결과를 적용한 합리적인 가치분석(VE)기법을 제시하였으며, 고속도로 개선 전 후 중앙분리대에 적용하여 가치평가를 수행하였다. 또한 기능분석을 통해 중점개선대상 기능 도출기법을 제시하였으며, 이를 통해 개선 전 중앙분리대 문제점의 정확한 분석이 가능하며 향후 다양한 교통안전시설의 가치대안 창출 시 적용 가능하다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.127-132
• /
• 2001

A successful design approach for noise barriers should be multidisciplinary because noise reduction goals influence both acoustical and non-acoustical considerations, such as maintenance, safety, physical construction, cost, and visual impact. These various barrier design options are closely related with barrier dimensions. In this study, we have proposed an optimal design method of straight noise barriers using genetic algorithm, providing a barrier having the smallest dimension and achieving the specified noise reduction at a receiver region exposed to the industry and traffic noise, to help a successful barrier design.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.40-44
• /
• 2019

Experimental studies have been carried out to investigate characteristics of gas explosion using a multi layered water gel barrier in a vented explosion chamber. The chamber is consisted of 1600 mm in length, with a square cross-section of $100{\times}100mm^2$. The gel concentration of inner layer of MLWGB ranged from 10% to 90% with intervals of 10% by weight of gel. Displacement of the MLWGB was photographed with a measured using a high-speed video camera, and pressure development was measured using a data acquisition system. It was found that MLWGBs with 10 ~ 20% inner layer concentrations were ruptured during the explosions. As the concentrations of inner layer increased from 30% to 90%, the barriers were not ruptured. As the gel concentrations of the inner layer increased, the displacement increased toward the chamber exit and the pressure decreased for the ruptured barriers. It was found that the pressure attenuation obtained from the MLWGB was higher than that of the single water gel barrier. For the cases of non-ruptured barriers, the pressure inside the chamber less increased with increasing gel concentrations of the inner layer. It was also found that the displacement moved back into the chamber for non-ruptured MLWGBs, and it was sensitive to the gel concentrations.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제26권2호
• /
• pp.31-38
• /
• 2020

Purpose: The ramp is an important facility for the barrier free access and vertical circulation of users of various buildings, including users of walker, wheelchair users, stroller users, and baggage carriers. The installation standards for ramps in Korea have various problems during construction and BF certification. It is necessary to improve the criteria for ensuring practical mobility and safety. Method: Korean standard, International Standard(ISO 21542, 2011), German Standard(DIN 18040-1, 2010), Austrian Standard(OENORM B 1600, 2017), Swiss Standard(Norm SIA 500, 2009), Canadian Standard(Building Standards Guide, 2017), American Standard(ADA Standards, 2010) were investigated and analyzed. A comprehensive improvement of the ramp installation standards is proposed. Results: The ramp is a necessary facility for the barrier free access and vertical circulation of the disabled. It shall be installed with comprehensive consideration of the appropriate slope of the ramp, the distance of the continuous slope, the handle and upstand for pedestrian safety. In order to improve convenience, setting the proper slope and limiting the length of the slope are very important, and improvements are required to the levels presented by international and foreign standards. The unclear standards of Korean law and BF certification standards should be clearly improved so as not to be misinterpreted in construction and Barrier Free Certification. Implication: International and foreign standards should be reviewed to ensure practical mobility and safety. And comprehensive improvement measures should be presented through continuous research.