• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.409-420
• /
• 2021

The safety and health ledger system, which gives the responsibility of safety and health management for construction site workers to the construction project owner, was introduced as part of the overall revision of the Occupational Safety and Health Act. There is a need to explain the system's effectiveness in terms of economic feasibility to solve the execution problem of the system caused by low awareness and implementation rate. In this study, the economic effect of implementing the safety and health ledger system was analyzed using cost-benefit analysis based on the data discussed at the time of the introduction of the system. Results show that creating and managing the design safety and health ledger caused additional costs in implementing the system. As a result of comparing the cost of preparation and the direct and indirect benefits caused by the reduction of industrial accidents, the benefits were evaluated higher than the costs. Thus, it is thought that the safety and health ledger system reduces construction work accidents and generates economic effects.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.2
• /
• pp.45-49
• /
• 2019

The purpose of this study is to study how to draw up a safety guarantee certificate and its future expected effects in connection with the Industrial Safety and Health Act as it becomes mandatory to draw up a safety guarantee led by the owner who exercises practical decision-making authority and pays for the construction work. Therefore, Therefore, this study predicts the expected effects of the health and safety guarantee on the construction industry and the weaknesses that future health and assurance have in settling in the construction industry in relation to the revised Act on Industrial Safety and Health. And It will be used as basic data on the changes that will be brought by the shipper-led preemptive safety and health management system, as well as strengthening responsibilities and safety for the role of the shipper in the construction industry.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.49-58
• /
• 2020

In domestic construction sites, when installing steel pipe scaffolding and system scaffolding, the guardrails are installed after the installation of the work platforms. This conventional guardrail system (CGS) is always exposed to the risk of falls because the safety railing is installed later. In order to prevent fall disasters during erecting and dismantling scaffolds, it is necessary to introduce the advanced guardrail system (AGS) which installs railings in advance of climbing onto a work platform. For the introduction of the AGS, the structural performance of the system scaffolding applying the CGS and the AGS was compared and evaluated. The structural analysis of the system scaffold (height: 31 m and width: 27.4 m) with AGS confirmed that structural safety was ensured because the maximum stress of each element of the system scaffolding satisfies the allowable stress of each element. As a result of performance comparison of CGS and AGS for each element, the combined stress ratio of vertical posts in AGS was 6.4% lower than that of CGS. In addition, in the case of ledger and transom, the combined stress ratios of AGS and CGS were almost the same. The compression test of the assembled system scaffolding (three-storied, 1 bay) showed that the AGS had better performance than the CGS by 9.7% (8.91 kN). The cross bracing exceeds the limit on slenderness ratio of codes for structural steel design. But the safety factor for the compressive load of the cross bracing was evaluated as meeting the design criteria by securing 3 or more. In actual experiments, it was confirmed that brace buckling did not occur even though the overall scaffold was buckled. Therefore, in the case of temporary structures, it was proposed to revise the standards for limiting on slenderness ratio of secondary or auxiliary elements to recommendations. This study can be used as basic data for the introduction of AGS for installing guardrails in advance at domestic construction sites.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1484-1502
• /
• 2023

The medical sector actively changes and implements innovative features in response to technical development and revolutions. Many of the most crucial elements in IoT-connected health services are safeguarding critical patient records from prospective attackers. As a result, BlockChain (BC) is gaining traction in the business sector owing to its large implementations. As a result, BC can efficiently handle everyday life activities as a distributed and decentralized technology. Compared to other industries, the medical sector is one of the most prominent areas where the BC network might be valuable. It generates a wide range of possibilities and probabilities in existing medical institutions. So, throughout this study, we address BC technology's widespread application and influence in modern medical systems, focusing on the critical requirements for such systems, such as trustworthiness, security, and safety. Furthermore, we built the shared ledger for blockchain-based healthcare providers for patient information, contractual between several other parties. The study's findings demonstrate the usefulness of BC technology in IoHT for keeping patient health data. The BDSA-IoHT eliminates 2.01 seconds of service delay and 1.9 seconds of processing time, enhancing efficiency by nearly 30%.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.624-633
• /
• 2023

Purpose: It Vas intended to identify problems and derive improvement plans by grasping the current status of safety management of public institutions among construction Vork orders. Method: By comparing the disaster status of public institutions compared to the total construction Vork, the analysis Vas conducted based on the results of the evaluation of the level of safety activities of public institutions Vith a high disaster rate and the results of actual consulting. Result: As a result of comparing and analyzing the current status of safety management of public institutions, the current status and problems of safety management in public institutions Vith a high accident rate Vere similarly discovered. Safety management organizations, document management systems, safety management systems, and risk assessment activities are operated Vithout reflecting the size and characteristics of the organization, so improvement in the relevant field is needed. Conclusion: Safety-related professionals and organizations should be formed according to the size of construction orders, and responsibility and authority should be clearly assigned. Since risk assessment is conducted formally to prepare a safety and health ledger, it is necessary to derive risk factors to prevent safety accidents for the actual construction. It is expected that the level of safety activities can be improved if it is improved by reflecting the size and characteristics of public institutions.