• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.271-274
• /
• 2001

Experiments on the yield strength of pipe connectors made of metal wire, joint pins, pole pipes, multi span insertion joints, and T-clamp joints used in pipe houses were conducted. The strength of connections of a pipe connector made of metal wire was adequate but it had a big difference according to loading direction. The collapse load of pipes connected with a joint pin was lower than that of single pipes. Also experimental results showed that pole pipes for use in a part of frame buried under the ground were safe, and the strength of multi span insertion joints should be increased. The resistant moment of T-clamp was about 13.7% of a single pipe.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.187-192
• /
• 2005

Pleurotus eryngii(King oyster) is one of the most promising mushrooms being produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors. To safely produce high-quality Eryngii all the year round, it is required that the environmental factors be carefully controlled by well designed structures equipped with various facilities and control systems. This study was carried out at the commercial mushroom cultivation houses to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted from Nov. 10, 2004 to Aug. 27, 2005 in Eryngii. cultivation houses. The environmental factors measured for this study were inside/outside temperature, relative humidity and $CO_2$ concentration in Pleurotus eryngii medium. In addition, the yield and quality of mushroom were made investigation. But the optimal productivity will be evaluated by considering the quality and quantity of mushroom production, energy requirements, facility construction and management cost, etc.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1832-1834
• /
• 2009

A simple and safe method has been presented for conversion of olefins into bromohydrins using hydrogen bromide and hydrogen peroxide as bromide source by visible light induced within a very short time to get high yield bromohydrins along with a little mount dibromo-product. In this paper, cyclohexene is firstly carried out as the model substrate and investigated the bromination under HBr/$H_2O_2$ system using 150 W incandescent light irradiated in C$Cl_4$ within short time to get good yield of 2-bromocyclohexanol along with a little mount of 1,2-dibromocyclohexane; then, a series of alkenes are brominated to corresponding bromohydrins using the same protocol.

• Steel and Composite Structures
• /
• v.17 no.6
• /
• pp.951-965
• /
• 2014

Point bending is commonly used for cambering and curving steel girders to large radii. In this system, a hydraulic ram or press is used to apply concentrated loads at selected points to obtain the required vertical (cambering) or horizontal (curving) curved profile from induced permanent deformations. This paper derives closed form solutions that relate loads to permanent deformations for horizontally curving wide flange steel beams based on their post-yield response. These solutions are presented in a parametric form to identify the relationship between key variables and their impact on the accuracy of the curving operation. It is shown that point bending could yield parabolic curved profiles that are within 1% of a desired circular curve if the span length to radius of curvature ratio (L / R) is less than 1.5 and the point loads are spaced at one third the beam length. Safe limits are then established on loads, strains and curvatures to avoid damaging the steel section. This leads to optimization of the point bending operation for inducing a circular profile in wide flange steel beams of any size.

• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.281-289
• /
• 2015

In sustainable viticulture, green manure represents a safe and non-polluting way to bring large quantities of organic matter into the soil. The cultivation of green manure crops plays an important role in soil quality and sustainability of agricultural system. This study was conducted to evaluate the effects of green manure fertilization on yield and quality of the Campbell Early grape variety in the organic vineyard. Hairy vetch was the more productive green manure crop, yielding higher dry materials. Average yields of grape were significantly greater in hairy vetch+rye ($13.02ton\;ha^{-1}$) than nature weed ($11.65ton\;ha^{-1}$), respectively. The concentrations of total as well as individual anthocyanins were consistently higher with hairy vetch treatment compared with rye and nature weed, thus making the green manure cultivation is an environmentally friendly cultivation to increase the yield and anthocyanin contents in organic grape.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.24 no.2
• /
• pp.65-73
• /
• 1979

Experiment was conducted to study the optimum sowing date and nursery duration at Jean An from 1976 to 1978 and their influence on the growth, dry matter production during growth period of the rice plant. In case of Tongil lines, the lengthening of nursery duration and late sowing increased unexpected heading and prolonged heading and maturing period. High yield were obtained by increasing dry matter accumulation during growth period of rice plant. To obtain safe yield in Tongil lines transplanting must be done before May 30th.

• Korean Journal of Organic Agriculture
• /
• v.19 no.spc
• /
• pp.6-8
• /
• 2011

In order to produce the organic foods in accord with international standard, organic seeds should be used in organic farming. This study was conducted to establish the stable production of organic seed of waxy com by examining the growing characteristics, seed yield, and the economy for seed production by organic farming. The optimal sowing timing for organic seed production of waxy com hybrid was within 10 days of the $1^{st}$ of May with yield of 88~90% of conventional seed production. The optimal planting density was 41,600 plants/ha ($80{\times}30$ cm) for organic seed production of waxy com. The weight of 100 seeds and seed productivity increased at the planting ratio of 2:1 mother plant:male plant. Growth and seed production were improved by removing male plant at 7~10 days after silking. Organic fertilizer (mixed oil cake) was applied at a rate of 4~6 Mg/ha before sowing. Black plastic mulching was used for weed control. In addition, sex pheromone trap and bio-control agents were used for safe pest control and low labour cost.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.4
• /
• pp.305-308
• /
• 2004

Recently, with increasing concern for sustainable agriculture and safe agricultural products, organic farming has become widely adapted as an alternative to conventional farming. This study was conducted to investigate the effects of earthworm casts (EWC) with $100\%$ organic compost on the growth and yield characteristics of fall-cropping potato (Solanum tuberosum L. cv. Dejima) in Jeju. The treatments consisted of seven plots: 2-, 4-, 6-, 8-, and 10-ton $ha^{-1}$ EWC-treated plots, 1.2-ton $ha^{-1}$ complex fertilizer $(N-P_2O_5-K_2O,\;10-10-14)-for-potato$ (CEP)-treated plot as conventional practices, and a control plot. The plant heights were greater in the plots where EWC and CFP were applied than in the control plot. Tuber diameter, number of stems per plant, and chlorophyll level tended to increase in the plots where 8-10 tons $ha^{-1}$ of EWC were applied. The application of CFP and EWC showed an increment in the average tuber weight per plant, but there was minimal significant difference. The application of 8-10 tons $ha^{-1}$ of EWC resulted in an increase in the total tuber yield (21.61-21.87 tons $ha^{-1}$) as compared to the other plots. The highest yield of market able tubers was $69.8\%$ of the total yield from the 10-ton $ha^{-1}$ EWC-treated plot. Consequently, with regard to the growth and yield characteristics of fall-cropping potato, the effects of EWC application were more favorable than the effects of the application of a chemical fertilizer.

• Journal of Chest Surgery
• /
• v.47 no.2
• /
• pp.124-128
• /
• 2014

Background: A closed pleural biopsy is commonly performed for diagnosing patients exhibiting pleural effusion if prior thoracentesis is not diagnostic. However, the diagnostic yield of such biopsies is unsatisfactory. Instead, a thoracoscopic pleural biopsy is more useful and less painful. Methods: We compared the diagnostic yield of needle thoracoscopic pleural biopsy performed under local anesthesia with that of closed pleural biopsy. Sixty-seven patients with pleural effusion were randomized into groups A and B. Group A patients were subjected to closed pleural biopsies, and group B patients were subjected to pleural biopsies performed using needle thoracoscopy under local anesthesia. Results: The diagnostic yields and complication rates of the two groups were compared. The diagnostic yield was 55.6% in group A and 93.5% in group B (p<0.05). Procedure-related complications developed in seven group A patients but not in any group B patients. Of the seven complications, five were pneumothorax and two were vasovagal syncope. Conclusion: Needle thoracoscopic pleural biopsy under local anesthesia is a simple and safe procedure that has a high diagnostic yield. This procedure is recommended as a useful diagnostic modality if prior thoracentesis is non-diagnostic.

• Geotechnical Engineering
• /
• v.5 no.1
• /
• pp.7-18
• /
• 1989

In pile load tests on end bearing piles, generally, it is not possible to continue loading to the ultimate load. Thus, the concept of yield load has been introduced for determining design loads Iron the pile load test records. The conventional rules to determine the yield load were not available for evaluation on pile load test records obtained in 6 fields nearby westers 8r Southern Coasts in Korea. A new rule 9.as presented to determine easily the yield load, based on investigations on the pile load test records. The yield load of piles is determined at the infiection point on semi-logarithmic coordinates (P-logS), in which load is plotted in normal scale and settlement is plotted in logarithmic scale. This method may not only save much costs and times but also present safe luorking circumstances for pile load tests in field. It was found that the yield load represented the elastic limit of the pile load-settlement behalf.iota. The ultimate load, which is given at 25.4mm settlement on pile head, was 1.5 times of the yield load. The allowable long-term and short-term load capacities were, respectively, 50% and 75% of the yield load. The safety factors to get the allowable pile capacity were obtained as 2.0~4.0 for the equations to predict the static pile capacity.