• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.515-522
• /
• 2005

The ship plating is generally subjected to. combined in-plane load and lateral pressure loads, In-plane loads include axial load and edge shear, which are mainly induced by overall hull girder bending and torsion of the vessel. Lateral pressure is due to. water pressure and cargo. These load components are nat always applied simultaneously, but mare than one can normally exist and interact. Hence, far mare rational and safe design of ship structures, it is af crucial importance to. better understand the interaction relationship af the buckling and ultimate strength far ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except far the impact load due to. slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to. the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are investigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.61-67
• /
• 2005

The ship plating is generally subjected to combined in-plane load and lateral pressure loads. In-plane loads include axial load and edge shear, which are mainly induced by overall hull ginder bending and torsion of the vessel. Lateral pressure is due to water pressure and cargo. These load components are not always applied simultaneously, but more than one can normally exist and interact. Hence, for more rational and safe design of ship structures, it is of crucial importance to better understand the interaction relationship of the buckling and ultimate strength for ship plating under combined loads. Actual ship plates are subjected to relatively small water pressure except for the impact load due to slamming and panting etc. The present paper describes an accurate and fast procedure for analyzing the elastic-plastic large deflection behavior up to the ultimate limit state of ship plates under combined loads. In this paper, the ultimate strength characteristics of plates under axial compressive loads and lateral pressure loads are inverstigated through ANSYS elastic-plastic large deflection finite element analysis with varying lateral pressure load level.

• Journal of Navigation and Port Research
• /
• v.37 no.5
• /
• pp.519-526
• /
• 2013

In managing shipping business, the concept of seaworthiness of the vessel has developed in accordance with the development of the shipping industry. However, despite of the development of the vessel's seaworthiness, marine accident has continuously occurred at sea. International Maritime Organization(IMO) has paid attention to the research and investigation of Human Error in shipping operations in addition to physical seaworthiness of the vessel. In 1994, IMO adopted the "International Management Code for the Safe Operation of Ships and for Pollution Prevention(ISM code)" of "SOLAS 1974" Annex, to take countermeasure against this human error. In 1999, Korea adopted the 'ISM Code' and then enacted the Maritime Safety Act (previously Maritime Traffic Safety Act). The Maritime Safety Act regulates necessary qualifications of the Human Resources of shipping companies for establishment and implementation of the safety management system. However, there has been a discrepancy between shipowners and ship management companies in interpreting the legislative texts, finally causing confusion. In this paper, I would like to examine the deficiencies in the regulation on the standard of qualifications of the Designated Person under the Maritime Safety Act and thereby suggest any possible improvements in it.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.331-337
• /
• 2022

In 2021, the Joint Group of Experts on the Scientific Aspects of Marine Environmental Protection (GESAMP), a U.N. advisory research institute, cited container loss as one of six sources of marine litters in shipping. The sinking of the X-P ress Pearl in May 2021 caused a catastrophic environmental pollution accident in which the loaded containers were moved to the shore, and the plastic pellets were loaded inside covered the coast of Sri Lanka. With this history, the International Maritime Organization (IMO) will discuss prevention and follow-up measures for container loss during ship voyages, as an agenda at the 8th Sub Committee on Carriage of Cargoes and Containers meeting in September 2022. To establish Korea's response direction at the IMO meeting, this study identified major causes of container loss accidents, and considered the response through analysis based on the accident investigation report and related professional data. As a result, it was found that the major cause of container loss during voyages was the enlargement of container ships, bad weather, and poor loading of containers. In particular, the need to prepare countermeasures for the deterioration of the operational safety of large container ships due to bad weather was identified. Additionally, integrated monitoring of the implementation of international conventions is required, for the safe sea transportation of container cargo. In particular, in terms of preservation of the marine environment, it is necessary to supplement the system for the recovery of lost containers. Finally, it was found that it is necessary to establish systems that can complement each other in the shipbuilding and shipping industries, in terms of shipbuilding as well as ship operation, to fundamentally prevent container loss accidents at sea. It is judged that it is difficult to resolve the various factors of container loss at sea during voyages, by responding from an individual perspective.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.2
• /
• pp.323-335
• /
• 2016

The main reason of marine casualties is the human error in respect of ship's operation. The human error of officers in charge of a navigational watch is related to their abilities to handle of navigational equipment. Navigational devices play a key role to help officers decide what to do for safe navigation. Thus, the abilities to handle of navigational equipment mean not only operation of devices but also entire understanding of the system such as interpretation of information obtained from devices, appropriate use of information considering navigational circumstance. Qualification of seafarers is in accordance with STCW and detailed training courses for their qualification are provided by IMO model course series. Recently, ships engaged on international voyages shall be fitted with an ECDIS not later than the first survey on or after 1 July 2018. As increasing use of ECDIS on ships, marine casualties related to ECDIS are on the rise. The primary causes of the accidents are lacking understanding of ECDIS system, wrong presentation of information on display, wrong safety setting by seafarers who use ECDIS, using small-scale chart and missing charts update. As a result of these primary causes, some problems like wrong route planning and use of limited or omitted information occur. It could be happening by inappropriate seafarers' training which is not sufficient to support improving abilities of officers to handle navigational equipment. For efficient training, it is need to develop training courses. Applying full mission simulation system to seafarers' training courses with case studies and best practices which are well-constructed scenarios based on true marine casualties can increase the effect of training. To use the simulation system, it is possible that seafarers are trained under condition that closely resemble real situation. It should be considered that IMO model course be revised depending on the level of seafarers also. It could be helpful for increasing seafarers' abilities of equipment operation in place of accumulation of experience spending much time. In the short term, effort of training courses improvement for seafarers is needed and long term, it should be tried to provide stable system and services relate to ECDIS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.980-991
• /
• 2023

To prevent accidents near the quay caused by a ship, ports are generally designed and constructed through navigation and berthing safety assessment. However, unpredictable accidents such as ship collisions with the quay or personal accidents caused by ropes still occur sometimes during the ship berthing or mooring process. Automatic mooring systems, which are equipped with an attachment mechanism composed of robotic manipulators and vacuum pads, are designed for rapid and safe mooring of ships. This paper deals with a displacement and velocity measurement system for the automatic mooring device, which is essential for the position and speed control of the vacuum pads. To design a suitable system for an automatic mooring device, we first analyze the sensor's performance and outdoor environmental characteristics. Based on the analysis results, we describe the configuration and design methods of a displacement and velocity measurement system for application in outdoor environments. Additionally, several algorithms for detecting the sensor's state and estimating a ship's velocity are developed. The proposed method is verified through some experiments for displacement and speed measurement targeted at a moving object with constant speed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.403-408
• /
• 2015

A text-based communication system has been developed with a communication function on AIS and display and input function on ECDIS as a way to complement voice communication. It features no linguistic error and is not affected by VHF restrictions on use and noise. The text communication system is designed to use messages for clear intentions and further improves convenience of users by using various UI through software. It works without additional hardware installation and modification and can transmit a sentence by selecting only via Message Banner Interface without keyboard input and furthermore has a advantage to enhance processing speed through its own message coding and decoding. It is determined as the most useful alternative to reduce language limitations and recognition errors of the user and solve the problem of various voice communications on VHF. In addition, it will help to prevent collisions between ships with decrease in VHF use, accurate communication and request of cooperation based on text at heavy traffic areas.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.962-968
• /
• 2013

Problem of greenhouse gases associated with global warming and the world rise in fuel oil prices due to the depletion of fossil fuel has attracted attention. For this reason, maritime transport business, has shown interest in green-ship technology to reduce the consumption of fuel and reduce greenhouse gas for environmental protection. Power system of the ship is one of the most important factors for safe operation. Therefore, at design of ship power system, most of existing vessel used comparative large capacity generator in order to respond peak load such as bow thruster, crane and etc. In the navigation of ship, marine generators most would be operated at low load operation. In the low load operation of the generation rate of 50% or less, the operation efficiency of the generator it deteriorated, to consume more fuel oil. It also, it means that adversely effect the life of the generator. In this paper, studied how to apply for a secondary battery in container ship that relatively frequent arrival and departure in port. As a result, in order to apply the secondary battery to increase the operating efficiency of the generator during the voyage, it was confirmed that it is possible to reduce fuel consumption.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.549-554
• /
• 2021

Precise 3D road geospatial information is the basic infrastructure for autonomous driving and is essential data for safe autonomous driving. MMS (Mobile Mapping System) is being used as equipment for road spatial information construction, and related research is being conducted. However, there are insufficient studies to analyze the effect of the baseline reference point distance, which is an important factor in the accuracy of the MMS outcome, on the accuracy of the outcome. Therefore, in this study, the accuracy of the data acquired using MMS by reference point distance was analyzed. Point cloud data was constructed using MMS for the road in the study site. For data processing, 4 data were constructed considering the distance from the reference point for MMS data, and the accuracy was analyzed by comparing the results of 12 checkpoints for accuracy evaluation. The accuracy of the MMS data showed a difference of -0.09 m to 0.11 m in the horizontal direction and 0.04 m to 0.19 m in the height direction. The error in the vertical direction was larger than that in the horizontal direction, and it was found that the accuracy decreased as the distance from the reference point increased. In addition, as the length of the road increases, the distance from the reference point may vary, so additional research is needed. If the accuracy evaluation of the method using multiple reference points is made in the future, it will be possible to present an effective method of using reference points for the construction of precise road spatial information.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.225-227
• /
• 2018

This research paper examines the history and present of 'temporary passengers' prescribed in Paragraph 9 of Article 5 of the Ships Safety Act Enforcement Regulations and suggests improvement plans referring to the examples of legislation of other countries. In 2015, Ministry of Ocean and Fisheries made authoritative interpretation that Paragraph 9 of Article 5 of the Ships Safety Act Enforcement Regulations, which prescribes special cargo drivers such as agricultural, marine or livestock vehicles as temporary passengers, is applied only to passenger ships and not to cargo ships such including Ro-Ro cargo ships. As the authoritative interpretation of the Ministry does not agree with not only the traditional interpretational methodology but also the interpretational methodology that are commonly used today, it lacks logical basis and looks unpersuasive. Paragraph 9 of Article 5 of the Ships Safety Act Enforcement Regulations can be applied not only on passenger ships but also on cargo ships. Also in case of Ro-Ro cargo ships, it is logically contradictory and against fairness not to acknowledge special cargo vehicle drivers as temporary passengers when there is no problem with safe navigation and safety of passengers on board even when the sailor, the sailor's family and the ship owner may be acknowledged as temporary passengers. To avoid unnecessary disputes and lawsuits, improvement plans using theory of legislation through statutory reform is more desirable. Therefore, the P aragraph should be amended to "Supercargo who deals with cargo that requires special care due to the characteristics of the cargo, such as transportation vehicles for agricultural products, marine products, livestock, explosives or flammable materials (drivers can serve as supercargos)" to reflect the distinct characteristics of cargo and ship navigation in Korea including the current distribution system, while setting an objective standard based on common sense of ordinary people and not on arbitrary interpretation.