• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.18-34
• /
• 2021

Pedestrian deaths in Korea due to traffic accidents are 40 percent of the fatalities in traffic accidents, which is about twice the average of OECD member countries. To reduce severe pedestrian accidents, it is necessary to apply the accident reduction measures to high-risk drivers (novice, elderly, and commercial vehicle drivers) who are more likely to cause traffic accidents than general drivers. Therefore, this study analyzed the effect of safe driving education on high-risk drivers' behavior. Here, the safe driving education is chosen as the measure to reduce traffic accidents. As part of the study, sudden pedestrian crossing situations were implemented in the driving simulator, and the vehicle trajectory data were collected to compare the driving behavior before and after the education. Most surrogate safety measures showed no improvement in the driving behavior of novice and elderly drivers, and the effect of safe driving education was found to be significant only in the group of commercial vehicle drivers. The results implied that additional measures such as pedestrian safety infrastructure and driver assistance systems, apart from the safe driving education, may be needed for novice and elderly drivers to reduce pedestrian accidents caused by them. With the findings mentioned above, this study is expected to provide a foundation to establish a plan to reduce pedestrian accidents caused by high-risk drivers.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.389-395
• /
• 2022

In order to ensure reliability the high-level automated driving such as Advanced Driver Assistance System (ADAS) and universal robot taxi provided by autonomous driving systems, the operation with high integrity must be generated within the defined Operation Design Domain (ODD). For this, the position and posture accuracy requirements of autonomous driving systems based on the safety driving requirements for autonomous vehicles and domestic road geometry standard are necessarily demanded. This paper presents localization requirements for safe road driving of autonomous ground vehicles based on the requirements of the positioning system installed on autonomous vehicle systems, the domestic road geometry standard and the dimensions of the vehicle to be designed. Based on this, 4 Protection Levels (PLs) such as longitudinal, lateral, vertical PLs, and attitude PL are calculated. The calculated results reveal that the PLs are more strict to urban roads than highways. The defined requirements can be used as a basis for guaranteeing the minimum reliability of the designed autonomous driving system on roads.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.195-204
• /
• 2008

When the drivers try to read an information on road signs, they can reach their destinations successfully. In this situation, human factors, road signs and geometric condition regarded as the most important factors for a safe driving should be a well-balanced relationship mutually. This research aims to prove the factors obstructing a safe driving, while drivers try to read an information on road signs for the next destination. For this sake, driving simulator was used and human factors, road signs etc. were considered in this experiment. The statistical analysis indicated what factors disturb a safe driving. The probability function using a Logistic Model was presented in this study. This result and experience will be used as a basic data in designing better road signs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.3
• /
• pp.199-209
• /
• 2015

This paper presents a model predictive control (MPC) approach to control the steering angle in an autonomous vehicle. In designing a highly automated driving control algorithm, one of the research issues is to cope with probable risky situations for enhancement of safety. While human drivers maneuver the vehicle, they determine the appropriate steering angle and acceleration based on the predictable trajectories of surrounding vehicles. Likewise, it is required that the automated driving control algorithm should determine the desired steering angle and acceleration with the consideration of not only the current states of surrounding vehicles but also their predictable behaviors. Then, in order to guarantee safety to the possible change of traffic situation surrounding the subject vehicle during a finite time-horizon, we define a safe driving envelope with the consideration of probable risky behaviors among the predicted probable behaviors of surrounding vehicles over a finite prediction horizon. For the control of the vehicle while satisfying the safe driving envelope and system constraints over a finite prediction horizon, a MPC approach is used in this research. At each time step, MPC based controller computes the desired steering angle to keep the subject vehicle in the safe driving envelope over a finite prediction horizon. Simulation and experimental tests show the effectiveness of the proposed algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.43-49
• /
• 2015

This paper designs and implements a smart phone safe application program for advanced preventing a danger during a car driving with doing a smart phone. The proposed smart phone safe application program has the aim to increase easily and naturally the concentration when the driver is using of the smart phone during a car driving. Especially when sudden situation occurs, If driver gives up driving conditions, and go to the restaurant, move to tourist resort. It will continue to send the text of driving even if another person is on the phone. In this paper a traffic safety simulation was performed using a fuzzy inference rules in order to solve these problem. The simulation is predicted greatly to decrease to send the auto sending message when the driver gives up suddenly the driving because catching up whether the car is driving or not.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.55-62
• /
• 2015

In this paper, we proposed the method that enabling warning through real-time analysis of dangerous driving behavior, improving driving habits and safe driving using the digital tachograph. Most of traffic accidents and green drive are closely related of driving habits. These wrong driving habits need to be improved by the real-time analysis, warning and automated method of driving habits. We confirmed the proposed that the method will help support eco-driving, safe driving through real-time analysis of driving behavior and warning through the method implementation and experiment.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.211-218
• /
• 2012

Two experiment are planed to identify driver's safe driving behaviour by curve radius, road surface condition in curve section. At four-lane and two-lane road, conducted experiments are check on driver's feeling of safety that 30 subjects do not feel discomfort. And using the data from these experiments, this study compare physical speed (not slipping, fall our of the road) with safety driving speed(drivers felt a comfortable and safe speed) each curve radius and fiver road surface condition(drying, wet, rain, snow and ice). As a result, safe driving behaviour factors that are derived to curve radius of 100m units, five road surface conditions enable to represent quantitative analysis of driver's discomfort. This study will develop road design method and evaluation reflected ergonomic aspects.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.1
• /
• pp.55-68
• /
• 2010

IEEE WAVE is going through the final standardization process as the wireless access technology which provides drivers in high-speed vehicles with safety-related information and commercial services This paper presents an application-layer protocol for safe driving assistant service and a service system emulator based on this protocol. The safe driving assistant system includes a construction zone information service and a vehicle crash notification service, an emergency vehicle notification service, a probing service and a dilemma zone decision assistant service. Emulator System design for verifying functions of system, The emulator consists of an emulator server that models the movement of all vehicles and road states and a number of clients that models functional units for OBUs, RSUs, and a traffic control center).

• ETRI Journal
• /
• v.37 no.3
• /
• pp.626-636
• /
• 2015

This paper proposes an adaptive multimodal in-vehicle information system for safe driving. The proposed system filters input information based on both the priority assigned to the information and the given driving situation, to effectively manage input information and intelligently provide information to the driver. It then interacts with the driver using an adaptive multimodal interface by considering both the driving workload and the driver's cognitive reaction to the information it provides. It is shown experimentally that the proposed system can promote driver safety and enhance a driver's understanding of the information it provides by filtering the input information. In addition, the system can reduce a driver's workload by selecting an appropriate modality and corresponding level with which to communicate. An analysis of subjective questionnaires regarding the proposed system reveals that more than 85% of the respondents are satisfied with it. The proposed system is expected to provide prioritized information through an easily understood modality.

• International Journal of Automotive Technology
• /
• v.7 no.5
• /
• pp.603-608
• /
• 2006

As an important and relatively easy to implement technology for realizing Intelligent Transportation Systems(ITS), Adaptive Cruise Control(ACC) automatically adjusts vehicle speed and distance to a preceding vehicle, thus enhancing driver comfort and safety. One of the key issues associated with ACC development is usability and user acceptance. Control parameters in ACC should be optimized in such a way that the system does not conflict with driving behavior of the driver and further that the driver feels comfortable with ACC. A driving simulator is a comprehensive research tool that can be applied to various human factor studies and vehicle system development in a safe and controlled environment. This study investigated driving behavior with ACC for drivers with different driving styles using the driving simulator. The ACC simulation system was implemented on the simulator and its performance was evaluated first. The Driving Style Questionnaire(DSQ) was used to classify the driving styles of the drivers in the simulator experiment. The experiment results show that, when driving with ACC, preferred headway-time was 1.5 seconds regardless of the driving styles, implying consistency in driving speed and safe distance. However, the lane keeping ability reduced, showing the larger deviation in vehicle lateral position and larger head and eye movement. It is suggested that integration of ACC and lateral control can enhance driver safety and comfort even further.