• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.7-13
• /
• 2004

In this paper, we demonstrate that Common Mid-Point (CMP) cross-correlation gathers of multi-channel and multi-shot surface waves give accurate phase-velocity curves, and enable us to reconstruct two-dimensional (2D) velocity structures with high resolution. Data acquisition for CMP cross-correlation analysis is similar to acquisition for a 2D seismic reflection survey. Data processing seems similar to Common Depth-Point (CDP) analysis of 2D seismic reflection survey data, but differs in that the cross-correlation of the original waveform is calculated before making CMP gathers. Data processing in CMP cross-correlation analysis consists of the following four steps: First, cross-correlations are calculated for every pair of traces in each shot gather. Second, correlation traces having a common mid-point are gathered, and those traces that have equal spacing are stacked in the time domain. The resultant cross-correlation gathers resemble shot gathers and are referred to as CMP cross-correlation gathers. Third, a multi-channel analysis is applied to the CMP cross-correlation gathers for calculating phase velocities of surface waves. Finally, a 2D S-wave velocity profile is reconstructed through non-linear least squares inversion. Analyses of waveform data from numerical modelling and field observations indicate that the new method could greatly improve the accuracy and resolution of subsurface S-velocity structure, compared with conventional surface-wave methods.

• 한국해안해양공학회지
• /
• 제5권3호
• /
• pp.204-211
• /
• 1993

Laplace 방정식을 Green 공식으로 해석한 경계요소법을 이용하여 수치수조에서 비선형파를 재현하였다. 미지수는 유체영역의 경계에 설정한 각 절점에서의 속도포텐셜과 수면변위이며 이를 구하기 위하여 지배방정식과 자유수면 경계조건을 기본식으로 하는 연립 1차방정식을 구성하였다. 동력학적 자유수면 경계조건에서 속도의 제곱항을 고려하였으며 자유수면 경계에서 속도포텐셜의 연직변화를 고려하여 이의 시간미분을 계산하였다. 본 수치모델을 이용하여 고립파와 Stokes의 2차 파낭을 재현한 결과, 이론치와 매우 잘 일치함을 확인하였다.

• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.257-270
• /
• 2002

콘크리트 지반구조물의 건전성 평가에 사용되는 충격반향기법에서는 콘크리트의 P파 속도가 부재의 길이 및 결함의 위치를 찾는데 있어서 매우 중요한 요소이다. 일반적으로 충격반향기법을 현장에 적용시에는 코어를 채취하거나 정확한 두께를 아는 위치에서 콘크리트의 P파 속도를 구한 후 이를 부재의 대표값으로 사용하여 부재의 두께 및 결함을 탐지한다. 그러나 경우에 따라서는 코어를 채취할 수 없고 대형 구조물의 경우 위치에 따라 콘크리트의 P파속도가 달라질 수 있다. 따라서 본 연구에서는 표면파기법을 이용하여 시험이 수행되는 위치에서 완전 비파괴적으로 P파 속도를 구하여 충격반향기법에 적용하고자 하였다. 이와 같이 제안된 충격반향-표면파 병행기법의 적용성 연구를 위해 먼저 유한요소법을 이용한 수치해석적 연구의 결과를 본 논문에, 모형부재 제작을 통한 실험연구의 결과를 다음 동반 논문에 소개하고자 한다. 수치해석 연구를 다루는 본 논문에서는, 표면파기법으로부터 P파 속도 추정의 검증을 위해 상용프로그램 ABAQUS를 이용한 슬래브 형태의 구조물의 모델링을 통하여 해석을 수행하였다. 또한 콘크리트 와 다른 매질로 이루어진 이질 매질층과 여러 가지 결함 형태를 포함하는 콘크리트 슬래브에 대한 충격반향기법에 대한 수치해석을 수행하여 기법의 적용성을 검증하였다.

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.987-995
• /
• 2018

In this study, a relationship between small-strain shear modulus ($G_{max}$) and overconsolidation ratio (OCR) based on shear wave velocity ($V_S$) measurement was established to identify the stress history of centrifuge model ground. A centrifuge test was conducted in various centrifugal acceleration levels including loading and unloading sequences to cause various stress histories on centrifuge model ground. The $V_S$ and vertical effective stress were measured at each level of acceleration. Then, a sensitivity analysis was conducted using testing data to ensure the suitability of OCR function for the tested cohesionless soils and found that OCR can be estimated based on $V_S$ measurements irrespective of normally-consolidated or overconsolidated loading conditions. Finally, the developed $G_{max}$-OCR relationship was applied to centrifuge models constructed and tested under various induced stress-history conditions. Through a series of tests, it was concluded that the induced stress history on centrifuge model by compaction, g-level variation, and past overburden load can be analysed quantitatively, and it is convinced that the OCR evaluation technique will contribute to better interpret the centrifuge test results.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.212-218
• /
• 2013

풍화된 응회암 시험편을 모사하기 위하여 최고 예열온도를 200, 400, 600($^{\circ}C$)로 한 예열시험편을 제작하였다. 각 예열시험편에 대한 실내시험을 통해 비중, 흡수율, 탄성파속도, 일축압축강도, 압열인장강도, 탄성계수, 포아송비, 슬레이크 내구성 지수를 측정하였다. 암석에 열을 가하는 경우 물성의 열화가 발생하는 것으로 나타났으나 예외적으로 슬레이크 내구성 지수는 별로 영향을 받지 않는 것으로 평가되었다. P-파 속도와 일축압축강도, 압열인장강도, 탄성계수, 흡수율 간에는 상당한 상관성이 있는 것으로 해석되었으며, P-파 속도를 알면 일축압축강도, 압열인장강도, 탄성계수, 흡수율을 추정할 수 있는 회귀식을 도출하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.64-69
• /
• 2006

At starting point, 1D velocity models were inverted by using 430 events with P-wave 5147, S-wave 3729 from KIGAM, KMA, KEPRI, and KINS's seismic networks. A minimum 1D model shows that P-wave velocities are around $6.0{\pm}0.5\;km/s$ slowly increasing with depth between surface and 15 km. The velocities are about $6.4{\pm}0.2\;km/s$ below 15km to 35km. The earthquake data number for 3D tomography was 630 adding to previous 430 events with limitation of more than 6 station detection and relocation stability of location. The checkerboard test shows that only upper curst part from surface to 17 km have reliable resolution. The results of upper crust part present that the boundary of Gyeong-sang basin and Youngnam massif is mach well velocity variation pattern. The western part of the basin is shown as lower velocity and south-eastern part as higher. This is because that sedimentary rocks are widely located around western part of the basin and volcanic origin rocks are distributed around south-eastern part.

• Geomechanics and Engineering
• /
• 제31권6호
• /
• pp.623-635
• /
• 2022

This paper presents the re-evaluation of existing piezocone penetration test (CPTu)-based shear wave velocity (V_s) equations through their application into well-documented data obtained at nine sites in six countries. The re-evaluation indicates that the existing equations are appropriate to use for any specific soil, but not for various types of clays. Existing equations were adjusted to suit all nine clays and show that the correlations between the measured and predicted V_s values tend to improve with an increasing number of parameters in the equations. An adjusted equation, which comprises a CPTu parameter and two soil properties (i.e., effective overburden stress and void ratio) with the best correlation, can be converted into a CPTu-based equation that has two CPTu parameters and depth by considering the effect of soil cementation. Then, the developed equation was verified by application to each of the nine soils and nine other worldwide clays, in which the predicted V_s values are comparable with the measured and the stochastically simulated values. Accordingly, the newly developed CPTu-based equation, which is a time-saving and economical method and can estimate V_s indirectly for any type of naturally deposited clay, is recommended for practical applications.

• 대한임상검사과학회지
• /
• 제47권1호
• /
• pp.28-34
• /
• 2015

Pulse wave velocity (PWV) is used to non-invasively estimate the severity of arteriosclerosis by measuring arterial stiffness. Increased arterial stiffness measured by PWV stands for progressive arteriosclerosis and is caused by atherosclerotic risk factors. This study is focused on how brachial-ankle pulse wave velocity (baPWV) is related to the leading risk factors for arteriosclerosis or atherosclerosis. Subjects were 114, 69 males and 45 females who are in 60's and had baPWV test for acute stroke. The results are as follows: the group with increased arterial stiffness showed significant increase in HbA1c, total cholesterol, BSBP (brachial artery systolic blood pressure), BDBP (brachial artery diastolic blood pressure), CSBP (central artery systolic blood pressure), CDBP (central artery diastolic blood pressure), augmentation index (AIx) and diabetes mellitus. Correlation analysis between baPWV and atherosclerotic risk factor showed significant relationship in age, HbA1c, LDL cholesterol, BSBP, BDBP, CSBP, CDBP and augmentation index. baPWV was independently related to age and BSBP in multiple linear regression analysis. The group with increased arterial stiffness was independently related to BDBP in multiple logistic regression analysis. This study might be meaningful in evaluating the relationship between arterial stiffness and atherosclerotic risk factor in a new way, and be helped to make various studies for cardiovascular disease.

• 한국자기학회지
• /
• 제23권4호
• /
• pp.130-134
• /
• 2013

자성센싱 홀소자가 구비된 집게형 맥진기와 대중적인 생체신호를 측정하는 심전도를 이용하여 맥파전달속도(PWV)를 조사하였다. 동시 측정된 심전도파의 피크치와 요골동맥파의 시작점의 시간차 그리고 심장과 손목간의 거리차를 가지고 맥파전달속도를 계산하였다. 임상데이터로부터 분석된 PWV값은 5~7 m/s의 범위 안에 평균 6 m/s이었다. 맥파전달속도 분석을 통한 혈관탄성도를 예측함으로써, 미래의 한양방 협진용 건강관리 의료기기에서 제시하는 주요 지수로 응용할 수 있는 가능성을 확인하였다.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.775-791
• /
• 2017

Surface wave techniques are widely used as non-invasive method for geotechnical site characterization. Field surface wave data are collected and analyzed using different processing techniques to generate the dispersion curves, which are further used to extract the shear wave velocity profile by inverse problem solution. Characteristics of a dispersion curve depend on the subsurface layering information of a vertically heterogeneous medium. Sometimes soft layer can be found between two stiff layers in the vertically heterogeneous media, and it can affect the wave propagation dramatically. Now most of the surface wave techniques use the fundamental mode Rayleigh wave propagation during the inversion, but this may not be the actual scenario when a soft layer is present in a vertically layered medium. This paper presents a detailed and comprehensive study using finite element method to examine the effect of soft layers which sometimes get trapped between two high velocity layers. Determination of the presence of a soft layer is quite important for proper mechanical characterization of a soil deposit. Present analysis shows that the thickness and position of the trapped soft layer highly influence the dispersion of Rayleigh waves while the higher modes also contribute in the resulting wave propagation.