• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.646-647
• /
• 2007

The topology processor uses the status of circuit breakers as input. It operates on the bus section connectivity data, which is stored in the data base, to determine the bus/branch topology of the network. This output of the topology processor forms part of the input to the state estimation or dispatcher power flow. This paper describes the development of the topology processor using matrix structure.

• 대한수학회지
• /
• 제36권2호
• /
• pp.345-354
• /
• 1999

In this paper, we obtain a matrix theorem which will be widely used in several theory and give it's applications. In particular, we present a further improvement of the improved Stile's theorem.

• 대한수학회논문집
• /
• 제11권1호
• /
• pp.63-70
• /
• 1996

Let K be a field of characteristic 0 and G a Klein's four group. We find the idempotent elements and units of the group ring KG by using the basic group table matrix of G.

• 지구물리와물리탐사
• /
• 제26권4호
• /
• pp.268-274
• /
• 2023

유한 단층 미끌림 역산에는 지진 변위 측지 자료와 그린 함수 행렬(Green's function matrix)을 주로 사용한다. 그린 함수 행렬은 일반적으로 오카다 모형(Okada, 1985)을 기반으로 한다. 그러나 최근 물리 기반 지진 모델링을 활용하여 그린 함수 행렬을 제작하고 유한 단층 미끌림 역산을 수행하는 연구가 활발하다. 물리 기반 지진 모델링은 다양한 물성(탄성, 점탄성, 탄소성 등)을 고려하여 현실적인 환경에서 지진을 모사할 수 있다는 장점이 있다. 물리 기반 유한요소 소프트웨어 PyLith는 단층을 구성하는 절점을 두 개로 나누어 지진을 모사할 수 있으므로 지진 모사 모델링에 적합하다. 하지만 PyLith는 격자망 생성 기능을 자체 제공하지 않아, 모형 내부에 수십~수백 개의 소단층과 관측점을 설정해야 하는 유한 단층 미끌림 역산 수행에는 어려움이 있다. 본 연구에서는 소단층과 관측점을 포함한 수치 모형을 제작하고, 지진 모사 모델링을 수행하여 그린 함수 행렬을 제작하는 일련의 과정을 연계하여 유한 단층 미끌림 역산의 편리성을 높이기 위해 CPInterface (COMSOL-PyLith Interface)를 개발하였다. CPInterface는 COMSOL의 격자 생성 능력과 PyLith의 지진 모사 능력을 결합하여 그린 함수 행렬을 자동으로 생성할 수 있다. CPInterface는 간단한 변수들로 모형 및 단층 정보를 조절할 수 있고, 지하 탄성 이상체와 GPS 관측점을 자유롭게 배치할 수 있다. 또한, 그린 함수 행렬을 생성하는 복잡한 과정을 간소화하여 더욱 편리하게 유한 단층 미끌림 역산을 할 수 있게 한다.

• Biomolecules & Therapeutics
• /
• 제20권2호
• /
• pp.133-143
• /
• 2012

Matrix metalloproteinases (MMPs) are a subfamily of zinc-dependent proteases that are re-sponsible for degradation and remodeling of extracellular matrix proteins. The activity of MMPs is tightly regulated at several levels including cleavage of prodomain, allosteric activation, com-partmentalization and complex formation with tissue inhibitor of metalloproteinases (TIMPs). In the central nervous system (CNS), MMPs play a wide variety of roles ranging from brain devel-opment, synaptic plasticity and repair after injury to the pathogenesis of various brain disorders. Following general discussion on the domain structure and the regulation of activity of MMPs, we emphasize their implication in various brain disorder conditions such as Alzheimer's disease, multiple sclerosis, ischemia/reperfusion and Parkinson's disease. We further highlight accumu-lating evidence that MMPs might be the culprit in Parkinson's disease (PD). Among them, MMP-3 appears to be involved in a range of pathogenesis processes in PD including neuroinflamma-tion, apoptosis and degradation of ${\alpha}$-synuclein and DJ-1. MMP inhibitors could represent poten-tial novel therapeutic strategies for treatments of neurodegenerative diseases.

• 대한기계학회논문집
• /
• 제19권6호
• /
• pp.1351-1362
• /
• 1995

A method to estimate the torsional critical speed for practical rotors has been developed in this study. First, the rotor with a uniform shaft segment is modeled for undamped torsional motion analysis, while satisfying all the boundary conditions. This eventually generates governing equations for the torsional critical speeds of the system. The set of governing equations has the form of a sparse and banded matrix. The elements of banded matrix can be arranged in partitions, which correspond to the specific boundary of the rotor. This permits an automatic generation of the system matrix using a computer. In order to calculate the determinant generated by the simultaneous equations, which leads to the torsional critical speed, a recurring numerical algorithm for a (3*4) sub-matrix has been used. This numerical algorithm practically examines successive (3*4) sub-matrix, one at a time, instead of treating a huge matrix. The output of the program provides the mode shapes with continuous curves. The method has been implemented to three rotors given as examples : a simple rotor, Prohl's rotor, and Macmillan rotor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.655-660
• /
• 2000

This paper presents the construction of consistent coefficient matrix elements for jointed structures using the reduction of flexibility and mass matrices. The reduced flexibility coefficient matrix hat little structural complexity than Guyan's stiffness matrix reduction since the only element of the original matrix, corresponding to the selected nodal degrees of freedom, contributes. The proposed method was applied to building equivalent coefficient matrices for a clamp jointed structure in finite element modal analysis of a cantilevered beam. The theoretical analysis results were compared with those experimental modal analysis, Comparison of both shows good agreement each other.

• KSBB Journal
• /
• 제6권1호
• /
• pp.79-83
• /
• 1991

생물고분자인 PHB로 고분자 matrix를 제조하여 대상약물인 silver sulfadiazine의 방출기전을 연구하였다. 고분자 matrix내의 PHB의 함유량 증가와 matrix의 두께비가 증가할수록 방출속도는 늦어졌다. 그러나 가소제량이 증가함에 따라 방출 기전은 각각 18, 17, 16, 12 및 10시간으로 감소하였다. 이 제형은 약물방출기전은 Higuchi model에 따른 확산으로 생각되었다. 결론적으로 PHB의 함유량과 가소제의 함유량 및 matrix 두께의 상관관계를 조절하므로써 특정한 약물의 방출기전을 얻을 수 있는 maxtrx형태의 개발 가능성을 보였다.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.58-65
• /
• 2003

The conventional forming process such as squeeze casting or die casting for fabricating metal matrix composites products have a disadvantage such as non homogenous distribution of reinforcement, weak bonding between matrix and reinforcement and cost increase in parts fabrication. Thixoforming process has been accepted as a new method for fabricating the net shaped metal matrix composites with lightweight and wear resistance. In this paper, the effect of volume fraction and reinforcement sizes on mechanical properties in cylinder liner part of metal matrix composites has been investigated with processes parameters such as pressure and velocity. Moreover, the methods to obtain the thixoforged composites cylinder liner with high quality has been proposed. To evaluate the composites cylinder linear fabricated at the conditions proposed in this study, mechanical properties of fabricated composites cylinder linear were compared with those of commercial composites cylinder linear.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.37-41
• /
• 2006

In this paper, a composition modulation of Dot-matrix display grayscale is presented. There's two method of expression of Dot-matrix Display grayscale. One is PWM by controlling pulse width. The other is PAM by controlling pulse amplitude. Composition modulation of Dot-matrix use PWM and PAM together. Composition modulation shows the number of grayscale as number of grayscale of PWM$\times$number of grayscale of PAM and have the effect of reduced size than existing single modulation.