• Computers and Concrete
• /
• v.33 no.4
• /
• pp.399-407
• /
• 2024

This study nondestructively examined the evolution of crack density in ultra-high performance concrete (UHPC) upon cyclic loading. Uniaxial compression was repeatedly applied to the cylindrical specimens at levels corresponding to 32% and 53% of the maximum load-bearing capacity, each at a steady strain rate. At each stage, both P-wave and S-wave velocities were measured in the absence of the applied load. In particular, the continuous monitoring of P-wave velocity from the first loading prior to the second loading allowed real-time observation of the strengthening effect during loading and the recovery effect afterwards. Increasing the number of cycles resulted in the reduction of both elastic wave velocities and Young's modulus, along with a slight rise in Poisson's ratio in both tested cases. The computed crack density showed a monotonically increasing trend with repeated loading, more significant at 53% than at 32% loading. Furthermore, the spatial distribution of the crack density along the height was achieved, validating the directional dependency of microcracking development. This study demonstrated the capability of the crack density to capture the evolution of microcracks in UHPC under cyclic loading condition, as an early-stage damage indicator.

• Journal of KIISE:Databases
• /
• v.30 no.1
• /
• pp.80-94
• /
• 2003

In this paper. we propose an enhanced concurrency control algorithm that minimizes the query delay efficiently. The factors that delay search operations and deteriorate the concurrency of index structures are node splits and MBR updates in multi dimensional index structures. In our algorithm, to reduce the query delay by split operations, we optimize exclusive latching time on a split node. It holds exclusive latches not during whole split time but only during physical node split time that occupies small part of whole split time. Also to avoid the query delay by MBR updates we introduce partial lock coupling(PLC) technique. The PLC technique increases concurrency by using lock coupling only in case of MBR shrinking operations that are less frequent than MBR expansion operations. For performance evaluation, we implement the proposed algorithm and one of the existing link technique-based algorithms on MIDAS-III that is a storage system of a BADA-III DBMS. We show through various experiments that our proposed algorithm outperforms the existing algorithm In terms of throughput and response time.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.392-401
• /
• 2001

Nowadays, the amount of image data increase explosively. To manage the large amount of image data efficiently, high-dimensional index structures are necessary. However, as my knowledge none of existing DBMSs supports high-dimensional index structures as access methods of DBMSs. In this paper, we design and implement CIR-Tree as a access method for retrieving image data effectively on the MiDAS-III that is the storage subsystem of the BADA-III. The implemented CIR-Tree manager shows much better retrieval performance than sequential search in performance evaluation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.1
• /
• pp.21-35
• /
• 2000

MIDAS-II is the storage system for BADA DBMS developed at ETRI. This paper describes the extension of MIDAS-II for incorporating the tertiary storage device such as an optical disk jukebox or a tape library, enabling MIDAS-II to function as a storage system of the data server that stores a massive amount of multimedia data. The MIDAS-II disk volume structure is extended to efficiently function as a volume for the tertiary storage device with multiple platters, which canstore huge amount of data of the order of tera bytes. The storage structure of the LOB is changed to efficiently manage the LOB data in the tertiary storage device. The data structures of the shared memory, the process structure, and the utilities in MIDAS-II are also extended to efficiently incorporating the tertiary storage device. The functionalities of each MIDAS-II API function are expanded to handle the tertiary storage device, while the prototypes of those functions are intact in order not to affect the existing application programs. The performance evaluation shows that the extended MIDAS-II works effectively with the tertiary storage device. All these extensions and the performance evaluation are conducted in the SunOS 5.4 environment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.5
• /
• pp.393-398
• /
• 2019

A poly[bis(4-butypheny)-bis(phenyl)benzidine] (poly-TPD) and poly(9-vinylcarbazole) (PVK) bilayer was employed as a hole transport layer (HTL) in solution-processed CdSe/ZnS quantum dot light-emitting diodes (QLEDs). The thickness of the PVK layer spin-coated onto the poly-TPD layer, whose thickness was fixed to 40 nm, was varied, with PVK layer thicknesses of 0 nm, 35 nm, 45 nm, and 55 nm. Because the thickness of the PVK can determine the hole transport properties of the HTL, a PVK thickness that maximizes the performance of the HTL for the QLEDs was investigated. By employing the optimized PVK thickness of 45 nm, the current efficiency of the QLED exhibited a 1.74 times improvement when compared with that of the QLED with poly-TPD based HTL without PVK. This was mainly attributed to the decrease in the energy barrier between the HTL and the quantum dot (QD) emitting layer (EML).

• Journal of the Korean Society of Food Culture
• /
• v.36 no.3
• /
• pp.247-255
• /
• 2021

Today, energy bars are consumed not only as snacks but also as meal replacement foods. Convenience and nutritional supplementation are the main factors accounting for the increasing use of energy bars. Two hundred Chinese customers who attended the China Fisheries & Seafood Exposition in China, and had no inhibitions about consuming cereal bars were selected. The questionnaire was composed of CATA choices that selected both the reasons for liking and disliking four different types of cereal bars, namely topokki flavor (hot pepper paste), seaweed flavor, kimchi flavor, and ginseng flavor cereal bars with 10% of dried anchovy content produced by BadaOne Co. (Seoul, Korea). The purpose of the study was to investigate Chinese consumer's attitudes and acceptance of different flavored cereal bars containing protein and calciumrich anchovy. For the selected Chinese customers, the acceptance score for the seaweed flavor was the highest, followed by topokki, red ginseng, and kimchi. The acceptance for the topokki flavor was higher than for seaweed for the attributes of color except for general acceptance, flavor, aroma, and texture. The results of the survey showed that the acceptance of kimchi was the lowest, contrary to earlier predictions. The results of the Check All That Apply (CATA) analysis showed that the reasons for liking the seaweed & anchovy flavor were the most diverse, and there was no reason chosen for disliking this flavor. The reasons for liking this flavor were listed as sweet flavor, healthy, seafood flavor, malty flavor, texture, new/unique, and umami. In the case of topokki and kimchi, the reason for disliking the flavor was umami, and in the case of red ginseng, the ginseng flavor was the reason for both likes and dislikes. CA analysis showed that both the flavor and emotional factors were positive for seaweed & anchovy and topokki, but negative for red ginseng. As a result, seaweed & anchovy flavor, which is familiar to the Chinese people, should be the first cereal bar considered for a launch.

• Journal of Technologic Dentistry
• /
• v.43 no.1
• /
• pp.29-33
• /
• 2021

Purpose: This study was conducted on dental technicians to examine the problems of the dental laboratory registration system and devise a plan to improve it. Methods: For data collection, an online survey was conducted on 14,015 dental technicians registered in the Korea Dental Technologist Association as of October 2020. Among the collected 405 questionnaires, 391 data were used for analysis. Results: We found that dental technicians felt that the dental laboratory opening registration system was unfair. There were problems including the problem of the verification method of job performance, not acknowledging the difference in the job field, and the lack of understanding of the structure of work cooperation between dentistry and dental laboratories. Furthermore, it was recognized that the system was improved by reflecting the change in job area according to the change of the times. Conclusion: There is an urgent need to reorganize the legal system so that the dental technicians can have their professionalism and autonomy recognized while remaining faithful to the public interest of protecting the national oral health by revising the related regulations, thereby ensuring smooth work activities.