• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.265-269
• /
• 2000

Nowadays the hydrophilic polymeric networks (polymer hydrogels) due to the complex of benefit physico-chemical properties attract a wide attention of specialists working in various fields of science, medicine and technology. The special attention of chemists is aimed on so-called stimuli-sensitive or intelligent hydrogels, which can undergo a volume phase transition in response to change in environmental parameters such as temperature, pH, solvent composition, etc [1]. Scientific group of Kazak State National University, Department of Macromolecular Chemistry works in this field [2-5]. Here we report about our achievements on pH-sensitive hydrogens.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.64-69
• /
• 1984

We found that the maximum efficiency of Al-MIS (p-Si) solar ceil was shown at 80$\AA$ thickness of Al-film which was deposited with slower velocity than 0.6$\AA$/sec. It was coated with ZnS and SiO for Anti-Reflecting. In single coating, ZnS and SiO film had maximum Isc at 570 and 690 A thickness, respectively. We confirmed that these results agreed well with the quarter coating condition; n1d1=λ/4. In double coating, we held the one layer with its optimum thickness in single coating and controlled the other layer. The maximum value of Isc in this case was almost the same with it in single coating but was maintained its value in so wide range of thickness. Keeping the relation; n1d1=n2d2 as another way, we made the total thickness of film thinner to 70-90% of the sum of each optimum thickness in single coating. In this case Isc was higher value than 20% of it in any other previous case and was retained so wide range of thickness.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.376-377
• /
• 2011

최근 Mg, Mg-Al합금, Al은 전자제품의 케이스, 차량의 휠 등의 신소재로서 활용성이 높아 사회적 수요가 급격히 늘고 있다. 이러한 수요 증가와 함께 관련 사업장에서는 취급 과정에서 폭발사고 위험성이 높아지고 있는데, 2010년도에는 국내 사업장에서 금속 분진에 의한 폭발사고가 4건이 발생하여 인명 및 재산피해가 발생하였다. Mg-Al합금의 폭발사고로 사망 1명과 부상 2명이 발생하였으며, Al분진의 폭발사고는 3건이 발생하여 사망 2명과 부상 3명의 인명피해로 이어졌다. 사고조사를 통하여 사업장에서의 금속분진에 대한 위험인식이 매우 낮은 것이 유사 사고가 반복되고 있는 가장 큰 이유로 알려지고 있는데, 이는 금속분진에 대한 부족한 안전기술정보와 밀접한 관련이 있다. 본 연구에서는 Mg, Mg-Al합금, Al등을 취급하는 관련 사업장에서 폭발사고 예방대책을 위하여 활용할 수 있는 폭발특성에 관한 안전기술정보 제공을 목적으로 하고 있다. 보다 구체적으로는 사고 다발 금속분진에 대한 위험성 이해에 도움을 될 수 있도록 동일 입경분포 조건에서의 위험성을 정량적으로 평가하였으며, 이를 위하여 각 금속분진의 동일 입경 조건에서 최대폭발압력, 폭발하한계 등의 폭발위험성 데이터를 실험적으로 조사 하였다. 조사한 시료는 평균입경 200 mesh의 Al, Mg, Mg-Al(60:40 wt%)로서 입도분석기(Beckman Coulter LSI 3320)를 사용하여 측정한 결과 평균입경은 약 $155{\mu}m$로 나타났다. Al분진의 농도변화에 따른 폭발압력을 조사한 결과, 최대폭발압력(Pmax)은 7.9 bar였으며 최대폭발압력상승속도 (dt/dP)max는 농도 $1500[g/m^3]$에서 322 [bar/s]로 최대가 되었으며 폭발 하한계(LEL)는 $70[g/m^3]$가 얻어졌다. 반면에 순수한 Mg의 LEL은 $30[g/m^3]$였으며 Pmax는 6.4 bar, (dP/dt)max는 100 [bar/s]가 얻어졌다. 이러한 결과로부터 LEL이 낮은 Mg는 Al보다 연소성이 큰 것으로 나타났으며, Al은 화염을 유지하는데 필요한 최저 열분해 가스농도를 확보하는데 Mg보다도 고농도의 분진이 필요함을 알 수 있었다. 또한 Mg-Al(60:40 wt%)의 LEL은 $50g/m^3$이었으며 Pmax는 9.4 bar, (dP/dt)max는 472 [bar/s]가 얻어졌다. 이러한 결과로부터 Mg-Al(60:40 wt%)합금의 연소성을 살펴보면 착화하기 쉬운 정도는 Mg와 Al의 성분비에 의해 변화하지만 Mg와 Al의 중간 정도로 나타나는 반면, Pmax는 Mg 또는 Al의 단독 물질 성분보다도 매우 큰 것을 알 수 있었다. 본 연구를 통하여 단일 성분의 Mg와 Al보다도 Mg와 Al이 일정 비율로 구성된 Mg-Al합금의 경우가 화재폭발 위험성이 증가한다는 사실을 알 수 있었으며, 이와 같은 폭발위험특성 자료를 활용하여 분진의 보관, 취급, 폐기 등의 지속적 관리가 필요하며 사업장 특성에 적합한 안전대책을 통한 사고예방대책이 요구된다.

• Communications for Statistical Applications and Methods
• /
• v.29 no.3
• /
• pp.397-402
• /
• 2022

The mathematical expression of the p-value calculation for the semi-partial correlation coefficient differs between Kim (2015) and Cohen et al. (2003). These two expressions were compared and the advantages of Kim (2015)'s approach over Cohen et al. (2003) were discussed.

• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.2
• /
• pp.51-55
• /
• 2016

The P/M processing of titanium aluminide using amorphous TiAl is developed by which it is possible to overcome inherent fabricability problems and to obtain a fine microstructure. A high quality amorphous TiAl powder produced by reaction ball milling shows clear glass transition far below a temperature at the onset of crystallization in differential scanning calorimetry above a heating rate of 0.05 K/s. We obtained a fully dense compact of amorphous TiAl powders, encapsulated in a vacuumed can, via viscous flow by hot isostatic pressing (HIP). Isothermally annealing of HIP'ed amorphous compact under a pressure of 196 MPa shows a progressive growth of ${\gamma}-TiAl$ phase with ${\alpha}2$ ($Ti_3Al$), which is characterized by increasing sharpness of X-ray peaks with temperature. Fully dense HIP'ed compact of titanium aluminide TiAl shows a high hardness of 505 Hv, suggesting strengthening mechanisms by sub-micron sized grain of ${\gamma}-TiAl$ and particle-dispersion by second phase constituent, ${\alpha}2$.

• Advances in nano research
• /
• v.3 no.4
• /
• pp.243-255
• /
• 2015

In this investigation, ecotoxicity of nano and micro metal oxides, namely silica ($SiO_2$) and alumina ($Al_2O_3$), on the growth of green algae (Porphyridium aerugineum Geitler) is discussed. Effects of nano and micro particles on the growth, chlorophyll content and protein content of algae are analysed using standard protocols. Results indicate that $SiO_2$ nano and micro $SiO_2$ particles are non-toxic to P. aerugineum Geitler up to a concentration of 1000 mg/L. In addition, $Al_2O_3$ microparticles are less toxic to P. aerugineum Geitler, whereas $Al_2O_3$ nanoparticles are found to be highly toxic at 1000 mg/L. Moreover, $Al_2O_3$ nanoparticles decrease the growth, chlorophyll content, and protein content of tested algae. In addition, zeta potential and contact angle are also important in enhancing the toxicity of metal oxide nanoparticles in aquatic environment. This study highlights a new insight into toxicity evaluation of nanoparticles on beneficial aquatic organisms such as algae.

• Journal of the Korean Chemical Society
• /
• v.36 no.3
• /
• pp.460-465
• /
• 1992

The structure of th 5S rRNA isolated from Xanthomonas citri was determined by enzymatic and chemical degradation methods. It consists of 119 nucleotides and contains no modified nucleosides. As does the 5S rRNA of X. maltophilia, it contains an additional uridine residue on the 5'-terminus. The secondary structure of the 5S rRNA from X. citri was almost identical to the generalized models proposed by many other workers [De Wachter et al., Biochimie, 64, 311 (1982); Specht et al., Nucleic Acids Res., 18, 2215 (1990); Cho et al., Proceedings of the First Symposium on Biomolecules, p. 9 (1991)]. The secondary structure of 5S rRNA from X. citri consists of five helices, five loops and two bulges. This 5S rRNA has a uridine residue at position 66 as a bulge.

• Journal of Powder Materials
• /
• v.7 no.1
• /
• pp.35-41
• /
• 2000

Al2O3$.$SiC particle was prepared was prepared by the self-propagting high temperature sYthesis(SHS) process from a mixture of SiO2, Al and C powders, The fabricated Al2O3$.$SiC particle was applied to 2024Al/(Al2O3$.$SiC)pcomposite as a reinforcement. Aluminum matix composites were fabricares by the powder extrusion method using the synthesized Al2O3$.$SiC particle and commercial 2024Al powder. Theoptimum preparation conditions for Al2O3$.$SiC partticle by SHS process were described. The influence of the Al2O3$.$SiC voiume fraction on the mechanical was composite was also discussed. Despite adiabatic temperature was about 2367K, SHs reaction was completed not by itself, but by using pre-heating. Mean particle size of final particle synthesized was 0.73 ${\mu}$m and most of the particle was smaller than 2${\mu}$m. Elastic modulus and tensile strength of the composite increased with increase the volume fraction of reinforcement but, tensile strength depreciated at 30 vol% of reinforcement.

• International Commerce and Information Review
• /
• v.8 no.1
• /
• pp.205-223
• /
• 2006

File sharing through P2P was decided as illegal according to Supreme Court of the U.S. and the Highest Court of Korea in 2005. Metro-Goldwyn-Mayer Studios Inc. et al. v. Grokster, LTD., et al. and Soribada v. Korea Association for Music Providers have the same ground for decision. P2P service company has vicarious liability for illegal file sharing of its customers. Balance between copyright protection and development of technology was considered in that decision. Programmer who will develop new program for free download and copyright holders who will exploit every measures to protect their right may compromise for their mutual benefits.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.149-157
• /
• 1994

The conditions for formation of allophane in volcanic ash soils in Cheju Island were investigated. Soils of toposequence distributed along the sourthern slope of Mt. Halla, and the major soil groups such as dark brown soils, very dark brown soils, black soils, and brown forest soils were colleted and analyzed for Al, Fe and Si extracted with solutions of pyrophosphate and oxalate. Mean annual temperature decreased $0.8^{\circ}C$ and mean annual precipitation increased 110mm with increase elevation of 100m. Organic carbon content increased and soil pH decreased with elevation, and the formation of allophane in soils formed a climosequence. Dark brown soils widely distributed in the northern and western coastal areas, where the mean annual precipitation ranged 1,240~1,420mm and the evaporation ranged 1,290~1,320mm, contained only small amounts of allophane and Al-humus complexes. For other soils, organic carbon content, pyrophosphate extractable Al, and $Al_p/Al_o$ were inversely correlated with $pH(CaCl_2)$. Allophane content showed close relationships wlth $pH(CaCl_2)$, and inverse relationships with organic carbon content and $Al_p/Al_o$.