• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.117-123
• /
• 2012

This paper discusses two different techniques used to measure the mechanical properties of thin films: the bulge test and the nanoindentation test. In the bulge test, a uniform pressure is applied to one side of the film. Measurement of the membrane deflection as a function of the applied pressure allows one to determine the mechanical properties such as Young's modulus, and the residual stress. A nanoindentation test is performed by pushing an indenter tip into the specimen and then withdrawing it, and then recording the indentation force as a function of the indenter position. A modified King's model is used to estimate the mechanical properties of the thin film in order to avoid the effects of the substrate layers. A combination of both the bulge test and the nanoindentation test can determine both Young's modulus and Poisson's ratio simultaneously.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.7-13
• /
• 1985

Design techniques for programmable storage/logic arrays(SLA's) with easily testable features are discussed. The easily testable SLA's will be designed by using additional hardware to provide an easy means to set or check the states. These augmented SLA's have the very short universal test sequences such that the test patterns and responses are uniquely determined only by the size of the SLA's independently of the function of them. The types of faluts considered here are single and multiple stuck faults, crosspoint faults, and bridge faults in SLA's. Fault location and reapir of SLA's are also considered.

• Nuclear Engineering and Technology
• /
• v.30 no.5
• /
• pp.424-434
• /
• 1998

RELAP5/Mod3.1 code was assessed with the semiscale experiment S-NC-3, and S-NC-4, which simulated the two-phase natural circulation and reflux condensation for the SBLOCA of PWR, respectively . Test S-NC-3 and S-NC-4 calculation results showed that RELAP5/Mod3.1 quite well describes the influence of steam generator secondary side heat transfer degradation on both two-phase natural circulation and reflux condensation. A comparison between the calculated and measured two-phase mass flow rate in test S-NC-3 shows good agreement for primary mass inventory more than 92%. And RELAP5/Mod3.1 have a good mass flow rate prediction capability for the transient such as S-NC-4 except some flow oscillations. The reflux flow rate for S-NC-4 test is under predicted, and the overall results verify that the correct prediction of the reduced liquid level appears to be required for the correct calculation of the overall phenomena.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.12 no.1
• /
• pp.11-16
• /
• 2016

Fuel assembly's mechanical characterization test facility (FAMeCT) in KAERI was constructed with upgraded functional features such as increased loading capacity, underwater vibration testing and severe earthquake simulation for extended fuel design guideline. This facility is designed and developed to provide out-pile fuel data for accident analysis model and fuel licensing. Functional tests of FAMeCT were performed to confirm functionality, structural integrity, and validity of newly-built fuel assembly mechanical test facility. Test program includes signal check of data acquisition system, load delivering capacity using real-sized fuel assemblies and a standard loading cylindrical rigid specimen. Fuel assembly's lateral bending test was carried out up to 30 mm of pull-out displacement. Limit case axial compression loading test up to 33 kN was performed to check structural integrity of UCPS (Upper Core Plate Simulator) support frame. Test results show that all test equipment and measurement system have acceptable range of alignment, signal to noise ratio, load carrying capacity limit without loss of integrity. This paper introduces newly constructed fuel assembly's mechanical test facility and summarizes results of functional test for the mechanical test equipment and data acquisition system.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.16 no.2
• /
• pp.189-211
• /
• 2003

The clinical data and thermographic imaging were analyzed on the 38 cases of Bell's palsy who were treated admission in the Oriental Medicine Hospital of Wonkwang University from January 2002 to May 2003. 38 patients with Bell's palsy were within one week after the onset of the paralysis, and thermal type in the DITI were hypo or hyper generally. Nerve conduction test(ENOG and EMG) examined in two weeks after onset. We studied interaction effect between thermal type and paralysis grade on admission day. We studied each main effect ; paralysis grade on admission day - nerve conduction test, nerve conduction test - thermal type, thermal type - paralysis grade after 4 weeks, paralysis grade on admission day - paralysis grade after 4 weeks, sasang constitution - nerve conduction test. The following results were obtained that interaction effect between thermal type and paralysis grade on admission day showed no significance, each main effect ; paralysis grade on admission day - nerve conduction test, paralysis grade on admission day - paralysis grade after 4 weeks, showed significance, each main effect ; nerve conduction test - thermal type, thermal type - paralysis grade after 4 weeks, sasang constitution - nerve conduction test, showed no significance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.525-526
• /
• 2009

On this paper we induce calcite($CaCO_3$) precipitation using microbial biomineralization of the Sporosarcina pasteurii and evaluate required performance evaluation by adjusting it to mortar. As a result carbonation normal mortar test piece(C3S-W) and mortar test piece(C3S-S.p) mixed with Sporosarcina pasteurii, reaction of C3S-S.p was late than C3S-W. Also, in the case of carbonation experiment of C3S-S.p curing in the Urea-CaCl2 aqueous solution(Medium) during 28days and durability of the C3S-W, durability of the mortar test piece(C3S-S.p) mixed with Sporosarcina pasteurii become higher than normal mortar test piece(C3S-W).

• The Korean Journal of Community Living Science
• /
• v.19 no.3
• /
• pp.399-410
• /
• 2008

The main purpose of this study was to examine the effects of drama activities using children's literature on the improvement of young children's creativity. To answer this research question, 2 groups, an experimental group composed of 18 five-year-old children who attend "J public Kindergarten," and a control group composed of 18 five-year-old children who attend "H public Kindergarten," were organized. Both kindergartens were located in Hwaseong, Gyeonggi-do. The experimental group participated in drama activities twice a week; 16 times for 8 weeks. In this study, the change in children's creativity was measured by conducting a pre-test and a post-test developed by Chun(2000). The results after 8 weeks of experimentation indicate that the drama activities using children's literature had a positive effect on promoting children's creativity. Comparing the scores of the pre-test and the post-test, it was obvious that the experimental group's creativity had been improved. The experimental group's creativity including the sub-elements of the test such as fluency, flexibility, uniqueness, and imagination, was improved more than that of the controlled group.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.10
• /
• pp.1081-1087
• /
• 2008

This paper describes limitations and solutions of the existing processor-monitoring concept for a military supersonics aircraft Flight Control Computer (FLCC) equipped with modern architecture processor to perform the system integration test. Safecritical FLCC integration test, which requires automatic test for thousands of test cases and real-time input/output test condition generation, depends on the processor-monitoring device called Processor Interface (PI). The PI, which relies upon on the FLCC processor's external address and data-bus data, has some limitations due to multi-fetching capability of the modern sophisticated military processors, like C6000's VLIW (Very-Long Instruction Word) architecture and PowerPC's Superscalar architecture. Several techniques for limitations were developed and proper monitoring approach was presented for modem processor-adopted FLCC system integration test.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1144-1145
• /
• 2005

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.1103-1113
• /
• 2010

An extensively used approach for family based association test(FBAT) is compared with the sib transmission/disequilibrium test(S-TDT), and in particular the adjusted S-TDT, in which the covariance among related siblings is taken into consideration, can provide a more sensitive test statistic for association. A simulation study comparing the three test statistics demonstrates that the type I error rates of all three tests are larger than the prespecified significance level and the power of the FBAT is lower than those of the other two tests. More detailed studies are required in order to assess the influence of the assumed conditions in FBAT on the efficiency of the test.