• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.2
• /
• pp.232-238
• /
• 2013

The vehicle system is a multi-domain system that requires many branches of science and engineering. Therefore the development of the vehicle system requires the use of design methodologies that utilize simulations, which have grown increasingly sophisticated in recent years. Our research group proposed a simulation modeling method based on the VHDL-AMS language. This paper describes how VHDL-AMS is used to model of vehicle fuel consumption simulation. The fuel consumption is shown using proposed simulation model on the Japanese 10-15 mode. We examine the influence of the vehicle system with electrical load and hill climb resistance in the vehicle running resistance.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2263-2268
• /
• 2011

THE VIBRATION MODE OF RAILWAY VEHICLE IS DIFFICULT TO FIND OUT THE CHARACTERISTICS OF MOTION DURING THE OPERATION ON THE TRACK BECAUSE THESE HAPPEN TO INDEPENDENCE OR DUPLICATION MOTION CAUSED BY VEHICLE, WHEEL/RAIL INTERACTION, TRACK IRREGULARITY AND FAILURE OF THE SUSPENSION & POWER TRANSMISSION DEVICE ETC. IT IS NAMED AN ABNORMAL VIBRATION THAT THE VIBRATION, WHICH WAS PASSED THE PRIMARY AND SECONDARY SUSPENSION, IS AFFECTED TO THE PASSENGER OR DRIVER WITHOUT DAMPING. THIS PAPER DESCRIBES AN EXPERIENCE EVALUATION TO FIND OUT THE CAUSE OF AN ABNORMAL VIBRATION WHICH WAS HAPPEN AT THE CAB OF POWER CAR IN KTX-SANCHEON TRAINSET WHEN ON RUNNING AT HIGH SPEED ZONE.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1644-1647
• /
• 2005

This study was aimed at evaluating the structural safety for rubber tired AGT system. Based on these, AGT system which was developed for first time in domestic is need to verify structural safety. So we measured the characteristics of guide-rail, switch rail, side wall in the constructed test track for rubber tired AGT system. Finally, all results of test showed that structural safety of the rubber tired AGT system.

• Journal of Energy Engineering
• /
• v.13 no.2
• /
• pp.161-165
• /
• 2004

Evaporative emissions from gasoline powered vehicles continue to be a major concern. The performance of carbon canister in evaporative emission control systems has become an important aspect of overall fuel system development and design. A vehicle's evaporative emission control system is continuously working, even when the vehicle is not running, due to generation of vapors from the fuel tank during ambient temperature variations. In this study, the effects of evaporative emissions on the engine performance were investigated. The experimental results show the effectiveness of this system for future exhaust emissions and enhanced evaporative emissions. This paper discusses the evaluation on the relationship between carbon canister condition and engine performance while engine is running.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.948-954
• /
• 2004

This study deals with the Evaluation of track system, when Newly developed Korea High Speed Train(KHST) by KRRI and KTX trains are running pass curved track of conventional line. In order to evaluate stability of track and vehicle running safety. the effect of curve radius, the field tests were performed at sharply curved track.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.115.5-115
• /
• 2002

In this paper, we introduce a system that detects all kinds of violations at a street intersection such as red light running, speed violation, stop line violation and lane violation by tracking individual vehicles. Two cameras are used for defecting violations. One is an analog camera for real-time tracking and the other is a digital camera for license plate reading. This system is connected to the traffic signal system controller and monitors the red, arrow, yellow and green phases of an approach. Two loops in the road are used to detect vehicle approach and speed. The system takes pictures of all vehicles passing a second loop and tracks the vehicles until they go out a street intersection...

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.180-185
• /
• 2005

Gear whine noise of the axle and transmission is getting more important for reduction of vehicle noise, because major noise of vehicle was reduced. Therefore, in this paper, axle noise and vibration is measured, then the modal analysis and running modal analysis is applied for identification of axle gear whine noise. And To reduce axle noise, Various structural modifications are performed by using FEM and BEM techniques.

• Interaction and multiscale mechanics
• /
• v.2 no.3
• /
• pp.263-276
• /
• 2009

This paper is intended to investigate interaction response of a train running over a suspension bridge undergoing support settlements. The suspension bridge is modeled as a single-span suspended beam with hinged ends and the train as successive moving oscillators with identical properties. To conduct this dynamic problem with non-homogeneous boundary conditions, this study first divides the total response of the suspended beam into two parts: the static and dynamic responses. Then, the coupled equations of motion for the suspended beam carrying multiple moving oscillators are transformed into a set of nonlinearly coupled generalized equations by Galerkin's method, and solved using the Newmark method with an incremental-iterative procedure including the three phases: predictor, corrector, and equilibrium-checking. Numerical investigations demonstrate that the present iterative technique is available in dealing with the dynamic interaction problem of vehicle/bridge coupling system and that the differential movements of bridge supports will significantly affect the dynamic response of the running vehicles but insignificant influence on the bridge response.

• Proceedings of the KSR Conference
• /
• 2006.11a
• /
• pp.219-227
• /
• 2006

Since the Maglew ehicle is run over an elevated guideway, the types of guideways affect the running behavior of the vehicle and guideway. The design of a guideway has a strong effect on the costs of constructing guideways, the optimized design of a guideway satisfying running performance is needed for the commercialization of the Maglew vehicle. With an analysis program for dynamics of Maglew vehicles, the dynamic responses of the UTM01 and guideway are numerically analyzed according to types of guideway.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.363-364
• /
• 2006

The important factor to evaluate the running safety of a railway vehicle would be the interaction force between wheel and rail(derailment coefficient), for which is one of important factors to check the running safety of a railway vehicle that may cause a tragic accident. In this paper, when interaction force between wheel and rail happens to wheel-set of tilting vehicles, it analyzes stress distribution and verified safety.