• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.849-854
• /
• 2008

For the running safety assessment of Saemaul train passing through curves, an analysis model for multibody system has been developed. By using this model and ADAMS/Rail, sensitivity analyses depending on the variation of parameters related to the derailment coefficients have been conducted. According to the increase of running speed, the derailment coefficient and unload ratio were increased. At high speed, the derailment coefficient and unload ratio of left wheel showed higher than right wheel. If the cant increased, the derailment coefficient and unload ratio increased. but decreased based on the balance cant value by the curvature and running speed.

• Wind and Structures
• /
• 제29권5호
• /
• pp.299-312
• /
• 2019

Due to the rugged terrain, metro lines in mountain city across numerous wide rivers and deep valleys, resulting in instability of high-pier bridge and insecurity of metro train under crosswind. Compared with the conditions of no-wind, crosswind triggers severer vibration of the dynamic system; compared with the short-pier viaduct, the high-pier viaduct has worse stability under crosswind. For these reasons, the running safety of the metro vehicle traveling on a high-pier viaduct under crosswind is analyzed to ensure the safe operation in metro lines in mountain cities. In this paper, a dynamic model of the metro vehicle-track-bridge system under crosswind is established, in which crosswind loads model considering the condition of wind zone are built. After that, the evaluation indices and the calculation parameters have been selected, moreover, the basic characteristics of the dynamic system with high-pier under crosswind are analyzed. On this basis, the response varies with vehicle speed and wind speed are calculated, then the corresponding safety zone is determined. The results indicate that, crosswind triggers drastic vibration to the metro vehicle and high-pier viaduct, which in turn causes running instability of the vehicle. The corresponding safety zone for metro vehicle traveling on the high-pier is proposed, and the metro traffic on the high-pier bridge under crosswind should not exceed the corresponding limited vehicle speed to ensure the running safety.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.887-895
• /
• 2018

본 논문은 수송량 증대를 위한 열차제어시스템의 안전거리 설계와 전동차 제동설계에 활용할 수 있는 제동모델을 제시한다. 제동모델을 위해 6량 1편성으로 운행되는 전동차의 제동특성을 시험하였다. 제동특성에 영향을 줄 수 있는 인자로는 마찰계수, 제동압력의 변화, 회생제동 등이 있으며 시험을 통해 확인하였다. 제동압력은 상용제동과 비상제동으로 구분하고 차량의 특성을 반영하였다. 주행하는 철도차량에 작용하는 외력은 주행저항을 측정 시험과 후처리 방법을 제시하고 있는 KS R 9217에 따라 시험을 수행하고 2차 다항식 형태로 해당 열차의 주행저항을 제시하였다. 차량의 재원, 마찰계수, 제동압력, 주행저항을 바탕으로 직선 평탄 선로를 주행하는 전동차의 동적 거동은 다물체 동역학 해석 소프트웨어를 이용하여 해석하였다. 해석결과는 상용제동과 비상제동에 대하여 시험결과와 비교 검증하였으며 상당히 합리적인 결과를 도출하였다. 검증된 모델은 제동초기 속도에 따른 정지거리를 분석하고 감속도 중심의 제동모델과 비교하였다. 또한, 운영기관의 마찰계수 한계치에 따라 열차제어시스템을 위한 안전거리는 변화할 수 있음을 확인하였다. 본 연구의 결과는 철도차량들을 연결하여 운행하는 열차의 동적 거동해석에 활용할 수 있을 뿐 아니라 차량 설계에서 제동에 영향을 미치는 다양한 선로환경 분석과 제동 성능향상의 기초자료로 활용할 수 있을 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3226-3236
• /
• 2011

In this paper, with the background features on which measuring the transverse left-right and up -down vibration of wheel, bogie and body by wireless measurement system, performance evaluation systems which can assess the running behavior of high speed trains based on UIC code 518-OR and evaluate the ride comfort of them based on ISO code 2631 and UIC code 513 were developed. The characteristics of dynamic vibration are generally analyzed by an acceleration of a car body of high speed train and the acceleration can be applied to evaluation of running safety. In this paper, also matching system of distance from tachometer and vibration from accelerometer was programmed in development software, and the SD card embedded system which prevent to loss of data in wireless measurement was mounted on this system. Finally the software perform to analysis with filtering and statistical post-process in the unit sections and zones and focus on developing the capability monitoring in the main control center. For the verification of this system, the running behavior and safety factor were analyzed based on field measured data of the Cheonjun-gunnum-sun turn out point in the new KTX railway.

• 한국철도학회논문집
• /
• 제3권3호
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

• Wind and Structures
• /
• 제38권6호
• /
• pp.411-425
• /
• 2024

To investigate the optimal aerodynamic parameters of wind barriers for the T-beam of high-speed railway (HSR) bridge and the wind field of the wind barrier-train-bridge system, the three-component forces of the system and the wind pressure on the vehicle surface were tested and analyzed through the sectional model wind test. The effects of wind velocity, with/without wind barrier, the height of wind barrier, and the air permeability of the wind barrier on the aerodynamic characteristics of the train-bridge system are discussed. Additionally, a CFD numerical model is constructed to evaluate the wind environment of the bridge surface with/without the wind barrier, and the impact of wind barrier on the running safety of vehicles are analyzed. Comprehensively considering the running safety of the train and the wind-resistant stability of the bridge, it is more appropriate to set the wind barrier height H as 3.5 m and the porosity 𝛽 as 30% respectively.

• 한국측량학회지
• /
• 제13권2호
• /
• pp.209-218
• /
• 1995

철도속도향상 계획은 미래에 있어 풍요로운 사회를 실현시키는데 중요한 역할을 담당하게 될 것이다. 열차 운행속도에 매우 큰 영향을 주는 선형 요소는 곡선구간으로서 이 구간에서는 열차의 주행성과 승객의 승차기분을 저해하는 요인을 줄이기 위해 완화곡선구간을 포함한 곡선부에 캔트 및 슬랙을 설치하게 되는데 이러한 값들은 열차의 종류가 다르기 때문에 균형적인 값을 사용하지 못하고 어느 정도 부족한 상태로서 유지되고 있다. 본 연구에서는 곡선반경별로 설정캔트량을 조사하여 부족캔트량에 대한 횡가속도를 산출하여 곡선부에서의 주행성을 검토하여 효과적인 곡선관리 방법을 제시하였으며 선형개량요소를 적용하여 속도향상 효과를 얻었다.

• 한국철도학회논문집
• /
• 제2권2호
• /
• pp.13-20
• /
• 1999

The vibration signals of driving parts of electric train are distorted its signal patterns due to the impact components, which occurs when wheel passes rail joints. An elimination method of the impact components is investigated using adaptive signal processing technique in this study The result shows that adaptive interference canceling method seems to be more effective than line enhancement technique. The application of adaptive interference canceling method to the signal measured at bogie shows that the extractions of the signals of driving parts of traction motor, reduction gear, and axle bearing are successful. Therefore, only the signals of bogie, which is the place to attach an accelerometer easily, is sufficient for the fault diagnosis and the safety evaluation of electric train. Also, adaptive interference canceling method can be applicable to evaluate the performance of vibration isolation between bogie and car body and to investigate the characteristics of indoor sound.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.679-684
• /
• 2004

Numerical analysis of aerodynamic characteristics was differently performed according to the running situation of the Korean Tilting Train eXpress (TTX) that would be introduced for an improvement in efficiency of the used railroad track. Fluent6.0 was used for the analysis of Non-tilting case, Tilting case and Passing-by case with the model of TTX. As a result, the aerodynamic drag had little difference between Tilting and Non-tilting case. However, pressure contour under the train of Tilting case was not symmetry because the gap between a train and the ground was different at both sides. And this disparity of pressure worked on the side force. In Passing-by case attraction and counterattraction occurred alternately and affected to the opposite train. When two trains were side by side, the maximum attraction was generated especially. Through an analysis of pressure wave in tunnel a large variation of pressure was generated by the bluff nose of TTX. The results in this study would be good data for the aerodynamic characteristic on TTX and provide important information to judgment of running safety.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.961-966
• /
• 2009

고속 철도 건설시, 선로중심 간격 및 시공기면폭의 감소는 건설 비용의 절감을 가져온다. 그러나, 선로중심간격의 축소는 열차 주행 풍압의 증가로 여러 가지 안전성 문제를 야기 할 수 있으므로 기술적 검토와 공기 역학적 연구가 수행되어야 한다. 본 연구에서는 호남고속철도에 적합한 선로 중심 간격을 검토하는데 필요한 차량 주행 안전성을 해석하기 위하여 선로중심 간격 변화로 인한 교행 열차 풍압을 예측하였으며, 차량 전복 안전성에 끼치는 열차 풍압의 영향에 대한 파라메타 연구를 하였다.