• 한국산업융합학회 논문집
• /
• 제13권4호
• /
• pp.205-209
• /
• 2010

Even the domestically small-and medium-sized companies progressed development in the monitoring equipment of inspecting run out in steel wheel aiming to supply and generalize through developing the monitoring equipment for securing quality technology and enhancing quality-test level. Run-Out value in vehicle wheel was measured with Computer & Servo system by using Low-Point marking machine control system, which is this development product. Low-Point value was operated and calculated. It marked by revolving wheel as much as the demanded measurement value based on 1ST harmony curve. Thus, the shipment of inferior product, which occurs in the measurement by the existing worker, could be blocked in advance. In the existing case, 60 sec. was required for inspecting 1 product. However, it came to bring about a rise in production volume through shortening inspection time to 8 seconds and improving workers' operating environment.

• 한국정보처리학회논문지
• /
• 제6권7호
• /
• pp.1941-1954
• /
• 1999

본 논문은 ITU-T 통신 처리 시스템용 프로그래밍 언어 CHILL에서 제공되는 병행처리 기능을 적용하기 위한 CHILL 실행시간 지원 시스템(CRS : CHILL Run-time support System)의 설계 및 구현에 관한 연구이다. CHILL은 다른 병행 프로그래밍 언어에 비해 다양한 병행처리 기능들을 제공하고 있기 때문에, CRS의 설계는 병행처리 기능의 인터페이스 규격을 설계한다. CHILL의 병행처리 프리미티브는 프로시듀어 호출 형식으로 사용하도록 라이브러리 방식을 사용하며, CHILL 프로세스의 실행을 병행적으로 제어하기 위해 CHILL 프로그램 구동 루팀 및 문맥 교환부와 CHILL 프로세스 제어부를 구현한다.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2004년도 품질경영모델을 통한 가치 창출
• /
• pp.413-418
• /
• 2004

The bounded adjustment is known to be more efficient than repeated adjustment when the cost is incurred for engineering process control. The procedure of the bounded adjustment is to adjust the process when the one-step predicted deviation exceeds the adjustment limit by the amount of the prediction. In this paper, two run rules are proposed and studied in order to improve the efficiency of the traditional bounded adjustment procedure. The efficiency is studied in terms of the standardized cost through Monte Carlo simulation when the procedure is operated with and without the run rules. The adjustment procedure operated with run rules turns out to be more robust for changes in the process and cost parameters. The Markov chain approach for calculating the properties of the run rules is also studied.

• 약학회지
• /
• 제43권4호
• /
• pp.429-436
• /
• 1999

A simple, accurate and reproducible Capillary electrophoresis (CE) assay has been developed for the determination of baicalin, baicalein, wogonin and chrysin in Scutellaria baicalensis. Successful separation of these compounds has been obtained in 35 mM phosphate butter (pH 7.0) using a untreated fused silica capillary ($57{\;}cm{\times}75{\;}{\mutextrm{m}}$ i.d.) at $25^{\circ}C$ with the electric field of 19kV. Baicalin, baicalein wogonin and chrysin was separated and detected at 280 nm 13 min. The detection limits of CE were acceptable compared to HPLC. Reproducibilities of migration time and peak area were 0.66~1.11% (within-run), 2.18~3.38% (between-run) and 3.50~4.55% (within-run), 3.97~4.82%(between-run) at CE. The results indicate that CE could be a promising technique for quality and quantity control analysis of Scutellaria baicalensis as a validation method.

• 상하수도학회지
• /
• 제19권4호
• /
• pp.497-505
• /
• 2005

Domestic Sewage Treatment Plants are mostly based on biological treatment, in which large amounts of excess sludge are generated and occupy about 40 ~ 60% of the total sewage treatment costs. Several methods for sludge treatment has been so far reported as upgrading biodegradation of sludge; heat treatment, chemical treatment, including thermo-alkali and ozone, mechanical treatment including ultrasonic pulverization. But, it has a limitation in case of reducing the amount of excess sludge which are already producted. In this study, application of excess sludge reduction process using thermophilic aerobic bacteria for activated sludge was examined. The research was carried out two different stage. one for a biological wastewater treatment and the other for a thermophilic aerobic solubilization of the waste sludge. A portion of excess sludge from the wastewater treatment step was into the thermophilic aerobic sludge solubilization reactor, in which the injected sludge was solubilized by thermophilic aerobic bacteria. The solubilized sludge was returned to the aeration tank in the wastewater treatment step for its further degradation. Sludge solubilization reactor was operated at $63{\pm}2^{\circ}C$ with hydraulic retention time(HRT) of 1.5 ~ 1.7 day. Control group was operated with activated sludge process(AS) and experiment group was operated with three conditions(RUN 1, RUN 2, RUN3). RUN 1 was operated with AS without sludge solubilization reactor. RUN 2 were operated with AS with sludge solubilization reactor to examine correlation between sludge circulation ratio and sludge reduction ratio by setting up sludge circulation ratio to 3. RUN 3 was operated with sludge circulation ratio of 3 and MLSS concentration of 1,700~2,000mg/L to examine optimum operation condition. The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge The quantity of excess sludge production was reduced sharply and in operation of RUN 3, sludge solubilization ratio and sludge reduction ratio were 53. 7%, 95.2% respectively. After steady state operation, average concentration of TBOD, SBOD, $TCOD_{Cr}$, $SCOD_{Cr}$, TSS, VSS, T-N, T-P of effluent were 4.5, 1.7, 27 .8, 13.8, 8.1, 6.2, 15.1, 1.8mg/L in the control group and were 5.6, 2.0, 28.6, 19.1, 9.7, 7.2, 16.1, 2.0mg/L in the experimental group respectively. They were appropriate to effluent standard of Sewage Treatment Plants.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권1호
• /
• pp.396-413
• /
• 2017

Dynamically checking the integrity of software at run-time is always a hot and difficult spot for trusted computing. Control-flow integrity is a basic and important safety property of software integrity. Many classic and emerging security attacks who introduce illegal control-flow to applications can cause unpredictable behaviors of computer-based systems. In this paper, we present a software-based approach to checking violation of control flow integrity at run-time. This paper proposes a high-performance and low-overhead software control flow checking solution, control flow checking at virtual edges (CFCVE). CFCVE assigns a unique signature to each basic block and then inserts a virtual vertex into each edge at compile time. This together with insertion of signature updating instructions and checking instructions into corresponding vertexes and virtual vertexes. Control flow faults can be detected by comparing the run-time signature with the saved one at compile time. Our experimental results show that CFCVE incurs only 10.61% performance overhead on average for several C benchmark programs and the average undetected error rate is only 9.29%. Compared with previous techniques, CFCVE has the characteristics of both high fault coverage and low memory and performance overhead.

• 산업경영시스템학회지
• /
• 제29권2호
• /
• pp.97-103
• /
• 2006

Recently, the control chart is developed for monitoring processes with normal short production runs by the coefficient of variation(CV) characteristic for a normal distribution. This control chart does not work well in non-normal short production runs. And most of industrial processes are known to follow the non-normal distribution. Therefore, the control chart is required to be developed for monitoring the processes with non-normal short production runs by the CV characteristics for a non-normal distribution. In this paper, we suggest the control chart for monitoring the processes with a gamma short runs by the CV characteristics for a gamma distribution. This control chart is denoted by the gamma CV control chart. Futhermore evaluated the performance of the gamma CV control chart by average run length(ARL).

• 경영과정보연구
• /
• 제37권3호
• /
• pp.65-81
• /
• 2018

본 연구는 ARDL 모형을 이용하여 한국의 원유수요의 장기와 단기 자체가격, 교차가격 및 소득탄력성을 추정하였다. 첫째, ARDL-UECM의 한계검정결과에서 장기공적분관계가 종속변수인 원유수요와 독립변수인 자체가격과 교차가격 및 소득변수간에 존재하였다. 둘째, ARDL 모형(장기정태모형)을 통해 장기 모수들이 추정되었다. 셋째, 일부의 잔차의 자기상관이 존재하였으나, 반면에 설정오류가 발견되지 않았고 잔차항이 정규분포를 나타내었으며 이분산이 존재하지 않았고 CUSUM & CUSUMSQ 결과에서는 계수가 안정적이었다. 넷째, 추정된 원유수요에 대한 절대값으로 측정된 장기자체가격과 교차가격탄력성 및 소득탄력성은 모두 유의하며 1보다 크고 탄력적으로 민감하였으나, 반면에 단기자체가격과 교차가격탄력성 및 소득탄력성은 모두 유의하며 1보다 적고 비탄력적으로 민감하지 않았을지라도, 장기와 단기의 모든 탄력성들이 실제부호와 기대부호가 일치하였다. 다섯째, 국내의 일부 연구를 제외하고 대부분의 국외의 이전연구에서 단기자체가격과 교차가격 및 소득탄력성은 본 연구의 장기자체가격과 교차가격 및 소득탄력성보다 모두 더 낮다는 것을 확인하였다. 따라서 외국원유에 너무 의존하는 한국은 원유가격의 충격에 취약하게 되므로 유가 상승은 확실히 한국의 무역수지에 부정적인 영향을 미칠 수 있으므로 장기적 원유가격의 탄력성을 이용하여 한국의 원유수요를 효율적으로 통제하고 관리하는데 도움을 줄 수 있다고 사료된다. 시사점으로 원유와 관련한 국가별 정책변화 및 시장동향 모니터링의 강화, 국가별 정책 및 시장현황 맞춤형 진출전략의 수립, 신시장 개척 및 진출분야 다양화를 통한 적극적인 시장선점 노력의 강화 등이 필요하다.

• Industrial Engineering and Management Systems
• /
• 제6권1호
• /
• pp.11-21
• /
• 2007

The PDCA (Plan, Do, Check and Act) cycle is often used in the field of quality management. Recently, business environments have become more competitive, and the due time of products has shortened. In a short production run process, to increase efficiency of management, the necessity for distinguishing the PDCA design that starts with PLAN and the CAPD design that starts with CHECK has been clarified. Starting from Duncan (1956), there have been a number of papers dealing with the economic design of control charts from the viewpoint of production run. Some authors (Gibra, 1971; Ladany and Bedi, 1976; etc.) have studied the economic design for finite-length runs; other authors (Crowder, 1992; Del Castillo and Montgomery, 1996; etc.) have studied the economic design for short runs. However, neither the PDCA nor the CAPD design of control charts has been considered. In this paper, both the PDCA and CAPD designs of the $\bar{\x}$ chart are defined based on Del Castillo and Montgomery's design (1996), and their mathematical formulations are shown. Then from an economic viewpoint, the optimal values of the sample size per each sampling, control limits width, and the sampling interval of the two designs are studied. Finally, by numerically analyzing the relations between the key parameters and the total expected cost per unit time, the comparisons between the two designs are considered in detail.

• 한국물환경학회지
• /
• 제21권6호
• /
• pp.602-608
• /
• 2005

A laboratory-scale experiment was conducted to investigate control of soluble microbial products (SMP) by the internal recycle rate in the submerged membrane separation activated sludge process. The internal recycle rate of the reactor RUN 1 and RUN 2 were 100 % and 200 %, respectively. SMP concentration was rapidly accumulated in the reactor (RUN 1). The variation of accumulated SMP concentration was related to the denitrification rate at the beginning experiment however SMP concentration decreased without correlatively to the denitrification rate during long operation time. The microbial kinetic model was rapidly presented in the both microbial growth and extinction in the reactor (RUN 1). In the SMP kinetic model, Internal recycle rate is the lower, value of UAP and BAP which SMP matter were presented low. The study about development of kinetic model is relatively well adjusted to the experiment exception SMP. In the future, SMP formation equation must be thought that continually research is necessary.