• 노동경제논집
• /
• 제21권2호
• /
• pp.17-46
• /
• 1998

In this paper, I pursue an empirical analysis of different patterns of employment and wage adjustments to demand changes for the US and Japan. Analyzed are the data in the 70's and 80's, the period that the two countries are believed to show most conspicuous diverging patterns. Using the framework of cointegration and error correction, I establish that in the US it is employment level, while in Japan it is wages, that is more responsive to output fluctuations both in the long run and the short run. All the comparisons on the long run relationships are estimated and tested based on the system cointegrating regressions, and the transition from the short run to the long run responses are investigated using impulse response analysis of the error correction models. I also study differences across genders and establishment sizes within each country. For males and females in Japan, the adjustments are significantly different both in the long run and the short run, but for the firms of different sizes they diverge only in the short run. In contrast to some of the earlier work, the gender effect turns out to be insignificant in the US.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.92-96
• /
• 2004

In this paper, polishing method using bonded magnetic abrasive particle has been applied to the micro mold polishing. Through process control using the Run-to-Run control, it tried to form the surface roughness In order to grasp the influence of the surface roughness which is reached by selection of control factor and the factor, a design of experiment was been processed. The study is processed with a purpose of to embody and to maintain the surface roughness of nano scale by the basis of an influence between a control factor and the factors which has been selected in this way. As a result, the result of the process control converged at a target value of surface roughness Ra 10nm and Rmax 50nm

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.519-524
• /
• 2005

A numerical process to simulate SiO2 dry etching with inductively coupled C2F6 plasmas has been constructed using a commercial CFD code as a first step to design a run-to-run control system. The simulator was tuned to reasonably predict the reactive ion etching behavior and used to investigate the effects of plasma operating variables on the etch rate and uniformity. The relationship between the operating variables and the etching characteristics was mathematically modeled through linear regression for future run-to-run control system design.

• 대한전자공학회논문지
• /
• 제17권2호
• /
• pp.15-22
• /
• 1980

Graphic image data의 효율적인 coding을 위해서, 한글 image와 영문 image의 통계적인 특성들이 측정 비교되었다. 또한 Markov model에 의한 run length의 확률분포와 측정된 run length의 확률분포가 비교 검토되었다. 측정된 run length 분포는 negative-power 분포에 유사하며, 이것은 한글 image 에서 더욱 뚜렷한 것으로 나타났다. 대표적 네가지 run length code의 coding 특성이 비교되었는데, 영문 image보다 한글image의 coding 특성이 더욱 우수한 것으로 밝혀졌다.

• Asian Journal of Atmospheric Environment
• /
• 제12권1호
• /
• pp.30-36
• /
• 2018

This study investigates the relationship between economic growth, energy consumption, trade openness, population density, and carbon dioxide ($CO_2$) emissions in Bangladesh for the period of 1975 to 2013. It applies the Autoregressive Distributed Lag (ARDL) bounds testing approach to cointegration for establishing the existence of a long-run relationship. The bounds tests suggest that the variables of interest are bound together in the long-run when $CO_2$ emissions is the dependent variable. The results indicate that energy consumption has statistically significant positive effect on $CO_2$ emissions both in the short-run and long-run. The effect of population density is significant in long-run, but not in short-run. The estimated coefficients for economic growth and trade liberalization are negative and insignificant both in short-run and long-run. The paper suggests that the government of Bangladesh should undertake the policy actions to develop alternative energy sources which would not emit much $CO_2$.

• 한국임상수의학회지
• /
• 제15권2호
• /
• pp.279-290
• /
• 1998

The diagnosis of canine diabetes mellitus is generally made by measuring serum fructosamine levels. The Rosental's end points Tas and El Din's kinetic, and Johnson and colleagues'kinetic techiniques were compared for the measuring serum fructosamine levels. In the Rosental's end point methods within-run and between-run coefficient of variability (CV) were 2.4-3.5% and 6.8-8.5%, respectively, and in the Tas and El Din's kinetic method, within-run and between-run CV were 1.3-3.0% and 3.4-3.9%, respectively. In the Johnson and colleagues'kinetic methods within-run and between-run CV were 0-1.8% and 3.1-6.8%1 ruts- pectively. Hyperlipidemia induced by oral administration of 3 ml of corn oil per kilogram body weight did not affect serum fructosamine concentration significantly in the Johnson and colleagues' kinetic method Johnson and colleagues'kinetic method is most reliable and consistant on the basis of comparison study.

• 한국공작기계학회논문집
• /
• 제18권1호
• /
• pp.22-28
• /
• 2009

In order to optimize the polishing process, Run to Run control scheme has been applied to the micro mold polishing in this study. Also, to fully understand the effect of parameters on the surface roughness a design of experiment is performed. By linear approximation of main factors such as gap and rotational speed of micro quill, EWMA (Exponential Weighted Moving Average) gradual mode controller is adopted as a optimizing tool. Consequently, the process converged quickly at a target value of surface roughness Ra 10nm and Rmax 50nm, and was hardly affected by unwanted process noises like initial surface quality and wear of magnetic abrasives.

• Journal of Gastric Cancer
• /
• 제20권1호
• /
• pp.81-94
• /
• 2020

Purpose: Duodenal stump leakage (DSL) is a potentially fatal complication that can occur after gastrectomy, but its underlying risk factors are unclear. This study aimed to investigate the risk factors and management of DSL after laparoscopic radical gastrectomy for gastric cancer (GC). Materials and Methods: Relevant data were collected from several prospective databases to retrospectively analyze the data of GC patients who underwent Billroth II (B-II) or Rouxen-Y (R-Y) reconstruction after laparoscopic gastrectomy from 2 institutions (Sir Run Run Shaw Hospital, Zhejiang University School of Medicine, and HwaMei Hospital, University of Chinese Academy of Sciences). The DSL risk factors were analyzed using univariate and multivariate analysis regression. Results: A total of 810 patients were eligible for our analysis (426 with R-Y, 384 with B-II with Braun). Eleven patients had DSL (1.36%). Body mass index (BMI), elevated preoperative C-reactive protein (CRP) level, and unreinforced duodenal stump were the independent risk factors for DSL. DSL was diagnosed in 2-12 days, with a median of 8 days. Seven patients received conservative treatment, 3 patients received puncture treatment, and only 1 patient required reoperation. All patients recovered successfully after treatment. Conclusions: The risk factors of DSL were BMI ≥24 kg/㎡, elevated preoperative CRP level, and unreinforced duodenal stump. Nonsurgical treatments for DSL are preferred.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.104-111
• /
• 2000

A fuzzy logic Run-by-Run(RbR) controller and an in -line wafer characteristics prediction scheme for the rapid thermal processing system have been developed for the study of process repeatability. The fuzzy logic RbR controller provides a framework for controlling a process which is subject to disturbances such as shifts and drifts as a normal part of its operation. The fuzzy logic RbR controller combines the advantages of both fuzzy logic and feedback control. It has two components : fuzzy logic diagnostic system and model modification system. At first, a neural network model is constructed with the I/O data collected during the designed experiments. The wafer state after each run is assessed by the fuzzy logic diagnostic system with featuring step. The model modification system updates the existing neural network process model in case of process shift or drift, and then select a new recipe based on the updated model using genetic algorithm. After this procedure, wafer characteristics are predicted from the in-line wafer characteristics prediction model with principal component analysis. The fuzzy logic RbR controller has been applied to the control of Titanium SALICIDE process. After completing all of the above, it follows that: 1) the fuzzy logic RbR controller can compensate the process draft, and 2) the in-line wafer characteristics prediction scheme can reduce the measurement cost and time.

• 재무관리연구
• /
• 제24권1호
• /
• pp.149-182
• /
• 2007

본 연구는 한국유가증권시장(거래소시장)에 상장된 기업 중 1997년부터 2002년까지 스톡옵션을 부여한 기업을 소유경영기업과 전문경영기업으로 분류하여 스톡옵션 도입 후 장기성과에 영향을 주는 요인을 분석한다. 스톡옵션 제도의 도입목적이 주주와 경영자 사이의 대리인비용 절감이라면, 소유경영기업보다는 전문경영기업이 스톡옵션 도입 후 장기성과를 분석하는데 적합할 것이다. 선행연구에서는 주주와 경영자 사이의 대리인비용은 경영자지분과 시가장부가비율이 낮을수록, 현금흐름률, 매출성장률이 높을수록 높다고 주장하였다. 본 연구는 다양한 대리인비용의 대용치를 사용하여 스톡옵션 부여 후 장기주가성과를 분석하였다. 연구결과 전문경영기업의 장기주가성과는 경영자지분 및 시가장부가비율과는 음의관계를, 매출 성장률, 일인당 옵션규모와는 양의 관계를 갖는다. 반면에 소유경영기업의 장기주가성과는 현금흐름률 및 매출성장률과는 음의관계를, 자산규모와는 양의관계를 갖는다. 이러한 결과는 전문경영기업에서는 주주와 경영자 사이의 대리인비용이 스톡옵션 도입 후 성과를 결정하는 중요한 요소임을 의미한다. 그러나 소유경영기업에서는 스톡옵션이 주주와 경영자 사이의 대리인비용 절감 보다는 비현금보상, 신호, 기업 내 대리인비용 절감 등의 목적으로 이용된다는 가능성을 제시한다. 본 연구는 기업특성과 목적에 부합하도록 스톡옵션을 활용하는 것이 기업 성과 향상에 기여한다는 해석과 일관성이 있다.