• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.5
• /
• pp.203-208
• /
• 2016

Information system audit is the requirement to configure the information system successfully. However, there is a problem with reduction of efficiency in the audit work when the system capacity is growing up. In the subsidiary field of information system audit, there is the same problem. In this paper, we will focus on the database audit, and implement an SQL audit tool in order to improve the performance of a database. During the designing phase of the SQL audit tool which aim to improve the performance of a database, we have analyzed the requirements of SQL audit work. Based on the aforementioned them, the process of the SQL audit tool has been designed with SQL audit features in accordance with information audit process. During the implementation phase, we have implemented 3 main function modules according to the output of the design phase. The main modules we implemented are the audit job definition module, audit job executing module and result reporting module. With the implemented tool, it applied to an Electric Power Corporation project in China and compared with other tools that are able to use SQL audit. In this paper, the implemented SQL audit tool is able to perform the general SQL audit work and to reduce the cost of the audit work for database performance and to raise the accuracy of result and to apply the extended inspection rule which need to use SQL parsing.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.1
• /
• pp.35-45
• /
• 2016

Purpose: The present study was aimed to investigate the effect of corneal eccentricity on the axial rotation when wearing toric soft contact lenses were worn for certain time and changing the gaze directions. Methods: Toric soft contact lenses with double thin zone design applied on 85 of with-the-rule astigmatic eyes. Then, rotational direction and amount of contact lenses were measured after 15 minutes and 6 hours of lens wear. The difference was further compared and analyzed according to corneal eccentricity. Results: The rotation of toric lens showed a tendency to rotate to temporal direction in all gaze directions except temporal-upper direction in all groups of corneal eccentricity. The amount of lens rotation in the frontal gaze direction exhibited a negative correlation since the amount was decreased with increasing corneal eccentricity after both 15 minutes and 6 hours of lens wearing. In many cases, the cornea with small eccentricity also showed the lens rotation larger than $10^{\circ}$. The difference in rotational amount after 15 minutes of toric lens wear was small according to the corneal eccentricity however, the change of rotational amount of contact lens according to corneal eccentricity was shown after 6 hours of lens wear. Conclusions: The present study revealed that the amount of axial rotation was largely varied according to the wearer's corneal eccentricity when wearing toric lens and the rotational amount after certain time of lens was also affected by corneal eccentricity. Thus, it is suggested that the selection of toric soft contact lenses based on corneal eccentricity is necessary.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.6
• /
• pp.476-484
• /
• 2017

The purpose of this paper is to verify the structural integrity of a region with numerous penetration-holes in offshore structures such as semi-submersible rig and FPSO. In order to effectively check the yielding and buckling strength of plate members with penetration-holes, a screening analysis program was developed with the FE analysis tool to generate fine meshed model using the theoretical and analysis methods. When a hole is appeared in the plate structure members, the flow of stress is altered such that concentrations of stress form near the hole. Stress concentrations are of concern during both preliminary and detail design and need to be addressed from the perspectives of strength. To configure the geometrical shape, very fine meshed FE analysis is needed as the most accurate method. However, this method is practically impossible to apply for the strength verifications for all perforated plates. In this paper, screening analysis method was introduced to reduce analysis tasks prior to detailed FE analysis. This method is applied to not only the peak stress calculation combined stress concentration factor with nominal stress but also nominal equivalent stress calculation considering cutout effects. The areas investigated by very fine meshed analysis were to be chosen through screening analysis without any reinforcements for penetration-holes. If screening analysis results did not satisfy the acceptance criteria, direct FE analysis method as the 2nd step approach were applied with one of the coarse meshed model considering hole or with the very fine meshed model considering the hole shape and size. In order to effectively perform the local fine meshed analysis, automatic model generating program was developed based on the MSC/PATRAN which is pre-post FE analysis program. Buckling strength was also evaluated by Common Structure Rule (CSR) adopted by IACS as the stress obtained from very fine meshed FE analysis. Due to development of the screening analysis program and automatic FE modeling program, it was able to reduce the design periods and structural analysis costs.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.336-341
• /
• 2013

In this paper, the design concept of a low-temperature vacuum blackbody was described, and thermophysical model of the blackbody was numerically evaluated. Also the working performance of low-temperature vacuum blackbody was evaluated using infrared camera system. The blackbody system was constructed to operate under high-vacuum conditions ($2.67{\times}10^{-2}$ Pa) to reduce temperature uncertainty, which is caused by vapor condensation at low temperatures usually below 273 K. In addition, both heat sink and heat shield including cold shield were installed around radiator to prevent heat loss from the blackbody. Simplified mathematical model of blackbody radiator was analyzed using modified Stefan-Boltzmann's rule. The infrared radiant performance of the blackbody was evaluated using infrared camera. Based on the results of measurements, and simulation, temperature stability of the low-temperature vacuum blackbody demonstrated that the blackbody system can serve as a highly stable reference source for the calibration of an infrared optical system.

• Archives of design research
• /
• v.12 no.4
• /
• pp.182-190
• /
• 1999

There has been the rapid change of paradigm with the overflow of terms related to computers such as information, digital, cyber, virtual world and the change of time concept on the ground that it is common to change the world into virtual time. This study is about cybercharacters working in air-broadcasting with rapidly-developing internet, The cybercharacters including 3D animation developed from 2D animation are know to be manufactured with use of electronic mediun and computers and to exist in electronics. Though the emergence of the cybercharacters has a lot of gflnetic roots according to their objectives, they have in common that they are made by 3D graphics and they work in the virtual space, The great traits of the cybercharaters lie in the extension of interfacial function and ecological growth. In the cyberspace the interface, the meeting point between a computer and its users is the most important, The cybercharacters as medium providing new ruman interface become effective with growing interest in virtual reality, The cybercharacters also keep the ecological traits, They can also bring about added value with infusion of image and development of the network, These cybercharacters can also play the important parts in the continually developing cyberspace, The successful birth of the cybercharacter are based on, the technological power. assistance of fund and the ctrltural background, The information-entertainment of the cybercharacters functions well with the accompinimene of these three things, The cybercharacters can make a subject which keeps single issue as a central point of the virtual realty, The cybercharacters can also be connected with equity of "Korean knowledge information society" in the cultural rule of the internet and sociocul tural identity, identity.

• The KIPS Transactions:PartB
• /
• v.15B no.1
• /
• pp.37-44
• /
• 2008

With the growing proliferation of mobile computing devices, several industrial and academic research groups have a vigorous studying to remote control for various appliances with mobile devices such as Notebooks, PDAs, and Smartphones in home network environments. We can utilize the good points of mobile devices such as portability and usability so that we can remote control and manage the mobile devices connected on home networks anytime, anywhere. However, mobile devices use different languages. Therefore, they cause some problems because their interfaces and the methods of operation are different each other. To solve these problems, there are two consideration. First, we may be solved development of the user interface and difficulty of maintenance in order to control various heterogeneous devices. Second, we may provide the user interface which is dynamically adapting user's preferences and device characteristics. To satisfy these considerations, we describe the design of an adaptive user interface for home network environments using the UIML (User Interface Markup Language) based on XML (eXtensible Markup Language) and the profile information of the user and device. Therefore, we present several implementation examples that show how the framework can form the basis of prototypical applications.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.2
• /
• pp.55-68
• /
• 2024

Plant engineering companies create or refer to requirements documents for each related field, such as plant process/equipment/piping/instrumentation, in different engineering departments. The process-related requirements document includes not only a description of the process but also the requirements of the equipment or related facilities that will operate it. Since the authors and reviewers of the requirements documents are different, there is a possibility that inconsistencies may occur between equipment or parts design specifications described in different requirement documents. Ensuring consistency in these matters can increase the reliability of the overall plant design information. However, the amount of documents and the scattered nature of requirements for a same equipment and parts across different documents make it challenging for engineers to trace and manage requirements. This paper proposes a method to analyze requirement sentences and calculate the similarity of requirement sentences in order to identify semantically identical sentences. To calculate the similarity of requirement sentences, we propose a named entity recognition method to identify compound words for the parts and properties that are semantically central to the requirements. A method to calculate the similarity of the identified compound words for parts and properties is also proposed. The proposed method is explained using sentences in practical documents, and experimental results are described.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2016

The present study experimentally considers dynamic performance of large floating wave-offshore hybrid power generation platform in extreme conditions. In order to evaluate the motion performance of the large floating hybrid power generation platform, 1/50 scaled model was manufactured. A mooring line was also manufactured, and free-decay and static pull-out tests were carried out to check the mooring model. A mooring line table was introduced to satisfy the water depth, and environmental conditions were checked. Motion responses in regular waves were measured and complicated environmental conditions including wave, wind, and current were applied to see the dynamic performance in extreme/survival conditions. Maximum motion and acceleration were judged following the design criteria, and maximum offset and mooring tension were also checked based on the rule. The characteristics of hybrid power generation platform are discussed based on these data.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.5
• /
• pp.406-418
• /
• 2004

Last days, various kinds of applications and system were individually introduced into specific groups or enterprises by different objective without considering interoperability among those. However, the environment for data processing is changing rapidly in these days. And now the necessity is growing to integrate and couple applications and system in the process dimension for more flexible and quicker data processing on these application programs and system. When integrating these application programs or system, an integration based on XML is recommended as it is one of good methods which will the additional cost and satisfy the requirements of the integration. This is because the XML is not only device-independent data type which can be used any platform, but also it uses XSLT, the document conversion standard established by W3C, which allows easy data conversion from one to another type on occasion of demands. This paper studies a design and implementation of system to convert XML structure. This system shows the structure of source- side providing data and destination-side processing data with using XML schema that defines structural information of a XML document. And this system defines the structure relationship of desired form as mapping structural information and data. This system creates the XSLT document that defines conversion rule between two structures based information which is defined. The XSLT document which is created as described above will convert data to be appropriate to the structure of the destination- side. By implementing this system, it is able to apply a document into various kinds of structure without considering specific system or platform and it is able to construct XSLT document to which meaning of desired form can be given. This paper aims to offer a process conversion between documents and to improve interoperability and scalability, so that we can contribute to build XML document processing environment

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.22-29
• /
• 2011

An infrared thermographic imaging module of [$320{\times}256$] focal-plane array (FPA) based on [InAs/GaSb] strained-layer superlattice (SLS) was fabricated, and its images were demonstrated. The p-i-n device consisted of an active layer (i) of 300-period [13/7]-ML [InAs/GaSb]-SLS and a pair of p/n-electrodes of (60/115)-period [InAs:(Be/Si)/GaSb]-SLS. FTIR photoresponse spectra taken from a test device revealed that the peak wavelength (${\lambda}_p$) and the cutoff wavelength (${\lambda}_{co}$) were approximately $3.1/2.7{\mu}m$ and $3.8{\mu}m$, respectively, and it was confirmed that the device was operated up to a temperature of 180 K. The $30/24-{\mu}m$ design rule was applied to single pixel pitch/mesa, and a standard photolithography was introduced for [$320{\times}256$]-FPA fabrication. An FPA-ROIC thermographic module was accomplished by using a $18/10-{\mu}m$ In-bump/UBM process and a flip-chip bonding technique, and the thermographic image was demonstrated by utilizing a mid-infrared camera and an image processor.