• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.4
• /
• pp.432-440
• /
• 2015

UGVs(Unmanned Ground Vehicles) are robots that can substitute humans in reconnaissance operations of potentially dangerous and contaminated sites. Currently, there have been active research on utilizing UGVs in military environments. Much resrach has been focused on exploiting the weakness of topology-based routing and instead utilize location-based routing for the networking of UGVs. It is generally assumed that location-based routing methods can fully utilize the location information gained from GPS. However, this may not be possible in tactical environments due to enemy GPS jamming and LOS(Line of Sight) limitations. To solve this problem, we propose a location-based routing scheme utilizing low control message that can calibrate the location information using GPS information as well as location of neighboring UGV, movement direct and speed information. Also utilizing topology-based routing scheme to solve incorrect location information in GPS jamming region.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1061-1064
• /
• 1998

This paper proposes a new topology-based partition method for reconfigurable FPGA systems whose components nd the number of interconnections are predetermined. Here, the partition problem must also consider nets that pass through components such as FPGAs and routing devices to route 100%. We formulate it as a quadratic boolean programming problem suggest a paritition method for it. Experimental results show 100% routing, and up to 15% improvement in the maximum number of I/O pins.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.934-942
• /
• 2005

MANET(Mobile Ad hoc NETwork) routing protocols have merits and demerits under the specific situations. Because it is not clear which protocol is the best under all situations, a suitable routing protocol should be selected depending on the traffic and moving characteristics of nodes. The aim of this paper is to select an appropriate routing protocol to be used by the Korea Coal Corporation. So we designed working scenarios such as coal mining and tunnel supporting that reflected mobile characteristics of nodes. We constructed coal mining and tunnel supporting topology, and analyzed the performance of MANET routing protocols. This result can be used as a basis to select a MANET routing protocol in underground tunnel environment and other mine of the Korea Coal Corporation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.11
• /
• pp.3163-3181
• /
• 2023

Eavesdropping attacks have seriously threatened network security. Attackers could eavesdrop on target nodes and link to steal confidential data. In the traditional network architecture, the static routing path and the important nodes determined by the nature of network topology provide a great convenience for eavesdropping attacks. To resist monitoring attacks, this paper proposes a random routing mutation defense method based on dynamic path weight (DPW-RRM). It utilizes network centrality indicators to determine important nodes in the network topology and reduces the probability of important nodes in path selection, thereby distributing traffic to multiple communication paths, achieving the purpose of increasing the difficulty and cost of eavesdropping attacks. In addition, it dynamically adjusts the weight of the routing path through network state constraints to avoid link congestion and improve the availability of routing mutation. Experimental data shows that DPW-RRM could not only guarantee the normal algorithmic overhead, communication delay, and CPU load of the network, but also effectively resist eavesdropping attacks.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.360-369
• /
• 2007

Since wireless sensor networks consist of nodes with the constrained battery, it is important to construct the topology performing energy-efficient routing while maximizing the whole network lifetime. Previous works related to this do not take into consideration the specific communication pattern in wireless sensor networks. In this paper, we propose a novel routing algorithm, called Up-Down Tree(UDT), which first constructs the tree topology based on distance and then adjusts the transmission range determined by the two different phases, tree setup and data gathering, to adapt the specific communication pattern in wireless sensor networks. Therefore, the UDT can improve energy efficiency, maximize the network lifetime, and block network partition Simulation results show that the UDT has the improved energy efficiency by constructing the optimal topology.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.8
• /
• pp.19-29
• /
• 2001

The recent explosion in the Internet applications, Internet. host number and the traffic in the IP backbone network is posing new challenges for transport network. This requires a high-speed IP backbone network that has a substantially higher bandwidth than the one offered by current networks, which prompts the development of all-optical network. To obtain optical network utilization gains, we need a software which establishs logical topology to make possible the efficient use or physical topology, and control the optical network in combination with the IP layer routing protocols. Finally, the logical topology is required higher efficient than physical topology. For this an efficient algorithm for the routing and wavelength assignment(RWA) in the WDM all-optical network is necessary. In this paper, two kinds of heuristic algorithms to establish logical topology for WDM networks and arc applied to the design of logical topology of domestic backbone network. These algorithms are found to work quite well and they arc compared with each other in terms of blocking rate, etc.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.117-121
• /
• 2008

In ad hoc network, the scarce energy management of the mobile devices has become a critical issue in order to extend the network lifetime. Therefore, the energy consumption is important in the routing design, otherwise cluster schemes are efficient in energy conserving. For the above reasons, an Energy conserving Context aware Clustering algorithm (ECC) is proposed to establish the network clustering structure, and a routing algorithm is introduced to choose the Optimal Energy Routing Protocol (OERP) path in this paper. Because in ad hoc network, the topology, nodes residual energy and energy consuming rate are dynamic changing. The network system should react continuously and rapidly to the changing conditions, and make corresponding action according different conditions. So we use the context aware computing to actualize the cluster head node, the routing path choosing. In this paper, we consider a novel routing protocol using the cluster schemes to find the optimal energy routing path based on a special topology structure of Resilient Ontology Multicasting Routing Protocol (RODMRP). The RODMRP is one of the hierarchical ad hoc network structure which combines the advantage of the tree based and the mesh based network. This scheme divides the nodes in different level found on the node energy condition, and the clustering is established based on the levels. This protocol considered the residual energy of the nodes and the total consuming energy ratio on the routing path to get the energy efficiently routing. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.

• The Journal of the Korea Contents Association
• /
• v.7 no.5
• /
• pp.1-9
• /
• 2007

Topology information can be constructed hierarchically in the networks and the process of aggregating topology information is known as TA(Topology Aggregation). It is very important for scalability in networks. In paticular, routing and TA algorithm are very much elements on networks performance in private networks to networks interface. Therefore, in this paper, we designed and implemented routing simulator for TA in private networks to networks interface. And we evaluated and analyzed the existent TA algorithm using the implemented simulator. The implemented simulator can be used valuably to developing TA algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2875-2893
• /
• 2015

Existing coding aware routing algorithms focused on novel routing metric design that captures the characteristics of network coding. However, in packet coding algorithm, they use opportunistic coding scheme which didn't consider the queue state of the coding node and are equivalent to the conventional store-and-forward method in light traffic load condition because they never delay packets and there are no packets in the output queue of coding node, which results in no coding opportunity. In addition, most of the existing algorithms assume that all flows participating in the network have equal rate. This is unrealistic since multi-rate environments are often appeared. To overcome above problem and expand network coding to light traffic load scenarios, we present an enhanced coding-aware routing algorithm based on queue state and local topology (OQMCAR), which consider the queue state of coding node in packet coding algorithm where the control policy is of threshold-type. OQMCAR is a unified framework to merge single rate case and multiple rate case, including the light traffic load scenarios. Simulations results show that our scheme can achieve higher throughput and lower end-to-end delay than the current mechanisms using COPE-type opportunistic coding policy in different cases.

• Journal of Advanced Navigation Technology
• /
• v.19 no.1
• /
• pp.53-59
• /
• 2015

We consider the problems that consist of designing time, establishment cost, delay time and reliability in designing a mesh network when given link costs and traffic requirements between nodes. Designing time, establishment cost and delay time are less, reliability is higher in designing a mesh network. One of the problems designing time is solved by mesh network topology optimization and routing (MENTOR) algorithm that Aaron Kershenbaum propose, but the others remain. In this paper we propose a new mesh network design algorithm with small computational complexity that the others are solved. The result of the proposed algorithm is better than MENTOR's in total establishment cost, delay time and reliability.