• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.344-350
• /
• 2011

Higher integrated density in 3D ICs also brings the difficulties of routing, which can cause the routing failure or re-design from beginning. Hence, precise congestion estimation at the early physical design stage such as floorplan is beneficial to reduce the total design time cost. In this paper, an effective estimation method of routing congestion is proposed for 3D ICs at floorplan stage. This method uses synthesized virtual signal nets, power/ground network and clock network to achieve the estimation. During the synthesis, the TSV location is also under consideration. The experiments indicate that our proposed method had small difference with the estimation result got at the post-placement stage. Furthermore, the comparison of congestion maps obtained with our method and global router demonstrates that our estimation method is able to predict the congestion hot spots accurately.

• Advances in Computational Design
• /
• v.3 no.2
• /
• pp.191-200
• /
• 2018

Establishment of an efficient routing technique in multiple-input-multiple-output (MIMO) based mobile ad hoc network (MANET) is a new challenge in wireless communication system to communicate in a complex terrain where permanent infrastructure network implementation is not possible. Due to limited power of mobile nodes, a minimum power consumed routing (MPCR) algorithm is developed which is an integration of cooperative transmission process. This algorithm select relay node and support short distance communication. The performance analysis of proposed routing algorithm increased signal to noise interference ratio (SNIR) resulting effect of cooperative transmission. Finally performance analysis of the proposed algorithm is verified with simulated result.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.40-48
• /
• 2005

A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

• Journal of Communications and Networks
• /
• v.15 no.3
• /
• pp.301-311
• /
• 2013

This paper proposes a policy-based quality of service (QoS) management framework for adaptive routing decisions. We present an approach considering interior gateway protocol (IGP) for path discovery mechanisms and QoS-aware policies for configuring the network elements. The integration of the aforementioned modules into this policy-based network management (PBNM) system is demonstrated by conducting experiments in a real environment, the hellenic public administration network SYZEFXIS. These experiments combine different traffic conditioning mechanisms through event detectors, consider IP service level agreement mechanisms that interoperate with the PBNM system and analyze the enforcement of IGP and QoS policies. Finally, validation and measurement tools are used to prove the efficiency of this framework. It is shown that this architecture offers significantly increased performance and learning capabilities, while the PBNM system achieves adaptive QoS routing through automated configuration considering the avoidance of suboptimal routing issues or under-performance conditions of the network entities.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.525-532
• /
• 2004

In this paper, we proposed a multicast routing algorithm for QoS improvement in the wire/wireless integrated environment. We analyzed requests and characteristics of QoS, and then proposed a new algorithm that can improve QoS by adding node mobility to wire environment. This new algorithm constructs a dynamic multicast tree that can prevent a loss of packet and save the bandwidth. As a result of simulations comparing to another multicast algorithms, we showed that this new algorithm can simply and dynamically adjusts the construction of multicast tree with little delay and the most reducible bandwidth resources.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.3
• /
• pp.362-372
• /
• 2008

Manufacturers, or vendors, and their customers continue to adopt vendor-managed inventory(VMI) program to improve supply chain performance through collaboration achieved by consolidating replenishment responsibility upstream with vendors. In this paper, we construct a mixed integer linear programming model and propose a genetic algorithm for the integrated inventory and routing problems with lost sales maximizing the total profit in the VMI supply chains which comprise of a single manufacturer and multi-retailer. The proposed GA is compared with the mathematical model on the various sized test problems with respect to the solution quality and computation time. As a result, the GA demonstrates the capability of reaching solutions that are very close to those obtained by the mathematical model for small problems and stay within 3.2% from those obtained by the mathematical model for larger problems, with a much shorter computation time. Finally, we investigate the effects of the cost and operation variables on the total profit of the problem as well as the GA performance through the sensitivity analyses.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.10a
• /
• pp.279-282
• /
• 2000

물류시스템설계 및 개선의 일환으로 차량운송계획 문제는 매우 중요시되는 분야이다. 본 연구는 유전자 알고리즘을 이용한 통합물류 운송계획문제(Integrated Vehicle Routing Problem : IVRP)를 위한 전산화 모델의 개발로서 운송 중인 차량의 자동위치 조회시스템(Automatic Vehicle Location System : AVL)을 이용하여 차량운송의 통제기능을 높이며, 차량운송 효율을 높이는 목적으로 VRP문제와 AVL문제를 연계하는 통합운송시스템의 개념 연구이다. 본 연구에서는 다-물류센터를 고려한 운송 영역할당(Sector Clustering), 경로계획 문제(VRP) 및 유전자 알고리즘을 이용한 운송순서 계획(GA-TSP)을 고려한 통합운송계획모델의 개발을 목적으로 차량의 운송간의 통신 및 통제 등의 기능을 위하여 위치 추적을 가진 GPS와 통신시스템을 위한 TRS 및 위치설정을 위한 GIS를 고려하였다. 본 연구에서의 AVL시스템 개발을 위한 GPS, GIS 및TRS 등 AVL시스템의 구성요소에 대하여 그 개요를 조사 연구하였다. 또한 GPS, GIS을 기반으로한 물류시스템의 구성과 시스템에 필요한 기능 및 구성요소를 파악하고 서브 시스템을 구성하여 각 서브 시스템의 기본설계를 실시하기 위한 연구이다.

• Journal of Korean Society for Quality Management
• /
• v.20 no.1
• /
• pp.136-146
• /
• 1992

Most of scheduling papers on FMS have been considered that the fabrication process, the machining process and the assembly process etc. are independent and the releasing, routing, dependent, batching, loading problem are treated separetely. In this paper, we discuss that the integrated scheduling problem which can be solved for efficient use. We combine two systems that each process system which in order to produce a product is treated dependently, the releasing and the routing problem are combined one system and we present the efficient flexible manufacturing system as including the alternate process.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.603-609
• /
• 1987

In this paper, the single-row routing algorithm for munimizing the street congestion and reducing the between node congestion is deviced. To reduce the between node congestion, reference line crossing is defined and used. Reducing the number of total reference line crossing means reducing the total length which help reduce the power consumption of the integrated system and reducing the between node congestin which help reduce the wiring area. This algorithm has been implemented and tested with various example, then produced good results.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.43-50
• /
• 2004

The clock skew is one of the major constraints for high-speed operation of synchronous integrated circuits. In this paper, we propose a hierarchical partitioning based clock network design algorithm called Advanced Clock Tree Generation (ACTG). Especially new effective partitioning and refinement techniques have been developed in which the capacitance and edge length to each sink are considered from the early stage of clock design. Hierarchical structures obtained by parhtioning and refinement are utilized for balanced clock routing. We use zero skew routing in which Elmore delay model is used to estimate the delay. An overlap avoidance routing algorithm for clock tree generation is proposed. Experimental results show significant improvement over conventional methods.