• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1011-1014
• /
• 2002

This paper proposes a multicast packet-switching method which can less affect QoS degradation. The method includes a switch fabric with extra switching paths dedicated for multicast packets. Presented also are both a buffering structure and a scheduling algorithm for the proposed method. Simulation analysis for the method shows that the switching delay of unicast packets is decreased even though arrival rate of multicast packets is increased.

• ETRI Journal
• /
• 제28권1호
• /
• pp.31-44
• /
• 2006

In a packet switching network, congestion is unavoidable and affects the quality of real-time traffic with such problems as delay and packet loss. Packet fair queuing (PFQ) algorithms are well-known solutions for quality-of-service (QoS) guarantee by packet scheduling. Our approach is different from previous algorithms in that it uses hardware time achieved by sampling a counter triggered by a periodic clock signal. This clock signal can be provided to all the modules of a routing system to get synchronization. In this architecture, a variant of the PFQ algorithm, called digitized delay queuing (DDQ), can be distributed on many line interface modules. We derive the delay bounds in a single processor system and in a distributed architecture. The definition of traffic contribution improves the simplicity of the mathematical models. The effect of different time between modules in a distributed architecture is the key idea for understanding the delay behavior of a routing system. The number of bins required for the DDQ algorithm is also derived to make the system configuration clear. The analytical models developed in this paper form the basis of improvement and application to a combined input and output queuing (CIOQ) router architecture for a higher speed QoS network.

• 전자공학회논문지A
• /
• 제32A권8호
• /
• pp.19-30
• /
• 1995

For the efficient interconnection between SMDS and LAN, an interconnection protocol architecture in the router is proposed in this paper. A control method of xongestion which is produced by this interconnection of SMDS and LAN is also proposed. Especially, the SIP level 3 of SMDS is devided into CS-SIP3 sublayer and CLNAP sublayer in order to circumvent the problems which are producted by the protocol difference of two networks and to consider the interconnection with B-ISDN in the future. In this way, the interconnection of SMDS and LAN is transparentlly achieved through CLNAP layer, and the interconnection protocol architecture becomes simple. To test the performance of the router, amodel of interconnection protocol which is proposed by this paper is simulated using sliding window flow control. The simulation results show that the throughput of router is increased. The packet delay and the rate of packet discard are also decreased.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.243-246
• /
• 2003

본 논문은 프로세서가 내장된 임베디드 리눅스 툴킷을 이용하여 IP 패킷을 기존의 IPv4 네트워크에서 IPv6 네트워크로 변환해주는 라우터 설계에 관한 연구이다. 주소 변환 플렛폼으로 프로세서를 이용하여 IPv6 모듈을 리눅스에 이식하였으며, IPv4 네트워크와 IPv6 네트워크를 구성하여 실험하였다. 시험망 구축을 위하여 기존 IPv4망과 IPv6망의 터널링 기법으로 구성한 결과, ICMP ping6을 이용 패킷 응답값은 2 홉스에 평균 2$\mu$sec정도이다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 춘계학술발표대회
• /
• pp.1589-1592
• /
• 2005

VPN(Virtual Private Network)은 물리적인 장비나 회선을 논리적으로 구분하여 기존 전용회선을 기반으로 하는 사설 네트워크에 비해 상대적으로 적은 구축 비용, 융통성 있는 확장성, 저렴한 운용비용의 장점을 보유한 별도의 사설 네트워크를 구성하는 기술이다. 다양한 VPN 기술 중에서도 MPLS VPN 은 확장성, QoS 제공을 용이하게 해주는 장점을 가지고 있어 차세대 네트워크 기술로 부각되고 있다. 일반적으로 MPLS VPN 은 ISP 에서 제공하는 서비스로 인식되나 규모가 크고 다양한 사설 네트워크를 필요로 하는 기업의 네트워크 모델로도 적합하다. 또한 Virtual Router VPN 은 Customer Edge(CE) 장비로서 활용성이 큰 Switch 장비에 적용하여, CE 를 MPLS VPN 과 쉽게 연동하게 한다. 본 논문에서는 MPLS VPN 및 Virtual Router VPN 을 이용하여 기업 네트워크를 효과적으로 구성하는 방안을 기술한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권8호
• /
• pp.3079-3089
• /
• 2015

In this paper, a smart constrained application protocol (CoAP)-based gateway with a border router is proposed for home safety services to remotely monitor the trespass, fire, and indoor air quality. The smart CoAP gateway controls a home safety sensor node with a pyroelectric infrared motion sensor, a fire sensor, a humidity and temperature sensor, and a non-dispersive infrared CO2 sensor and gathers sensing data from them. In addition, it can convert physical sensing data into understandable information and perform packet conversion as a border router for seamless connection between a low-power wireless personal area network (6LoWPAN) and the Internet (IPv6). Implementation and laboratory test results verify the feasibility of the smart CoAP gateway which especially can provide about 97.20% data throughput.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.705-708
• /
• 2006

라우터 옵션중의 일부는 특정 환경에서만 필요한 기능들을 구현한다. 이러한 옵션들은 일반적인 환경에서 라우터의 패킷처리 효율을 저하시킨다는 점에서 미리 정의된 조건에 의해 라우터가 옵션 등을 포함한 설정을 동적으로 변경함으로써 라우터의 처리성능을 향상시킬 수 있다. 본 논문에서는 CLICK Modular Router 위에서 동적으로 설정을 재구성하는 기법을 제안하고 설계, 구현한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.533-536
• /
• 1988

For CMOS, this paper propose a new global routing algorithm in which macrocells and I/O padcells can be treated. Not only predefined feedthrough in base array, but also some polysilicon line which are not assigned as inputs are used to prevent the overflow of nets passing through the row. The signal nets are assigned on their feedthrough by the maze router. By treating macrocells and I/O padcell, the routing from internal to I/O cell can be done automatically and a kind of is constraints in design process can be reduced.

• Journal of Communications and Networks
• /
• 제13권6호
• /
• pp.612-620
• /
• 2011

Recently, one of the problems with the Internet is the issue of scalability. To this end, locator/identifier separation protocol (LISP), which separates end-system identifiers and routing locators, has been proposed as a solution. In the LISP deployed network, the ingress and egress nodes of inter-AS traffic is determined by edge router selection (ERS) and endpoint identifier-routing locator mapping assignment (ERMA). In this paper, joint optimizations of ERS and ERMA for stub networks with and without predetermined link weights are studied and the mixed integer linear programming (MILP) formulations for the problems are given. To make the problem with optimizable link weights tractable, a revised local search algorithm is also proposed. Simulation results show that joint optimization of ERS and ERMA enables better network performance.

• 한국ITS학회 논문지
• /
• 제10권4호
• /
• pp.116-124
• /
• 2011

Binary CDMA네트워크에서는 네트워크 각 엔터티들의 네트워크 자원을 마스터 스테이션이 관리하므로 마스터 스테이션의 관리 범위한계를 경계로 하는 Pico-net내에서만 통신이 이루어질 수 있다. 본 연구에서는 이러한 제한을 극복하여 보다 광역적인 네트워크에 Binary CDMA를 응용할 수 있는 방안으로서 네트워크를 Cell단위로 분할하여 다중의 Pico-net들로 구분하고 각 Pico-Cell에 고유의 네트워크 주소체계를 만들어 Pico-Cell간에 데이터를 중계하는 기능을 가지는 Binary CDMA 라우터 장치의 고안방법에 대하여 제시하였다.