• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.287-294
• /
• 2012

Ceramic Matrix Composites (CMCs) represent a class of non-brittle refractory materials for harsh and extreme environments in aerospace and other applications. The quasi-ductility of these structural materials depends on the quality of the interface between the matrix and the fiber surface. In this study, a manufacture route is described where in contrast to most other processes no additional fiber coating is used to adjust the fiber/matrix interfaces in order to obtain damage tolerance and fracture toughness. Adapted microstructures of uncoated carbon fiber preforms were developed to permit the rapid infiltration of molten alloys and the subsequent reaction with the carbon matrix. Furthermore, any direct reaction between the melt and fibers was minimized. Using pure silicon as the reactive melt, C/SiC composites were manufactured with an aim of employing the resulting composite for friction applications. This paper describes the formation of the microstructure inside the C/C preform and resulting C/C-SiC composite, in addition to the MAX phases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.107-107
• /
• 2012

Recently, large-area synthesis of high-quality but polycrystalline graphene has been advanced as a scalable route to applications including electronic devices. The presence of grain boundaries (GBs) may be detrimental on some electronic, thermal, and mechanical properties of graphene, including reduced electronic mobility, lower thermal conductivity, and reduced ultimate mechanical strength, yet on the other hand, GBs might be beneficially exploited via controlled GB engineering. The study of graphene grains and their boundary is therefore critical for a complete understanding of this interesting material and for enabling diverse applications. I present that scanning electron diffraction in STEM mode makes possible fast and direct identification of GBs. We also demonstrate that dark field TEM imaging techniques allow facile GB imaging for high-angle tilt GBs in graphene. GB mapping is systematically carried out on large-area graphene samples via these complementary techniques. The study of the detailed atomic structure at a GB in suspended graphene uses aberration-corrected atomic resolution TEM at a low kV.

• Korea-Australia Rheology Journal
• /
• v.20 no.2
• /
• pp.65-71
• /
• 2008

Pressure filtration technique was used to obtain defect-free microstructure of green cast ceramic bodies. Stable alumina suspensions of desired rheology (<5 Pa s at $1\;s^{-1}$) containing 60-80 mass. % solid loading were prepared in the alkaline region (at $pH{\approx}9$) with an optimum amount of 0.5 dmb % of Tiron added. Acidic region (at $pH{\approx}4$) enabled the preparation of 60 mass. % suspensions with addition of 1.5 dmb % of Tiron. The best quality slip was processed from an 80 mass.% suspension with 63% of theoretical density. The homogeneity of particle packing and the absence of defects in microstructure were proven by narrow pore size distribution (ranging from 32 to 64 nm, with up to 85% abundance), confirming advantages of the wet consolidation route.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.507-515
• /
• 2001

Tencel is a high quality cellulosic fiber, which is controlled and processed by an environmentally sound route. But, the point about tencel and the reason why it achieves its unique touch in its finished state is that it is a fibrillating fiber. That means it can take a great deal of punishment during the finishing process, which raise the fiber to produce the characteristics handle, without destroying the cloth. The aim of cellulase treatment is to improve appearence of tencel, plus the fiber ends protruding from the fabric surface. But enzymatic hydrolysis can weakens the fiber ends and changes the properties of fabrics. This study examined about the changes of properties according to several conditions and effect of cellulase to fibril of tencel. The results are as follows. The weight loss was occurred, tensile strength was decreased, softness was increased. And cellulase treatment reduced amount of fibril.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.251-262
• /
• 2004

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by shotball blasting. To developement of equipment, There is to be down noise and dust. Acording to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor. We have taken Taguchi's parameter design approch, specifically orthogonal array, and determined the optimal levels of stone surface through analysis of the experimental results using SIN ratio.

• Korean Journal of Organic Agriculture
• /
• v.16 no.1
• /
• pp.1-19
• /
• 2008

Producing Korean organic beef cattle costs a great deal because it needs breeding conditions like the organic feed, an uncontaminated breeding farm and so on. So the price of Korean organic beef (KOB) is more expensive than that of Korean general beef (KGB). To overcome this adverse price condition, a case production organization in Asan will choose direct marketing routes for consumers or the shop under direct management of the organization, or franchise shops. As a result, these marketing routes are expected to narrow the price gap between KOB and KGB. And consumers will accept the price of KOB if quality of KOB is very high level, for example the first grade++.

• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.16-20
• /
• 2003

Nitrogen(N) and phosphorus(P) in surface streams mainly lead to euthrophication. It aggravates water quality and consequently increases the purification costs. As a resolution of water contamination caused by household drainage through irrigation route by 70% of the 1,300 community residents in Eum-Am Myun, Seo-San city, was implemented biological self-purification method by growing Oenanthe Javanica along the polluted water tunnel. The contaminated water was efficiently purified after passing the dropwort field; DO conc. of effluent water was increased 8.3∼61.9% after through the drop wort field. HRT of experiment system was changed 0.05∼1.50/day. 50% of BOD was eliminated at the range above 12 mg/l of Influent BOD conc. Also, 50% of COD was eliminated at the range above 30 mg/l of Influent COD conc. Finnally, the influent T-N loading at range below 1.5 g/m$^3$/d reduced 50% of Influent T-N conc., and so did influent T-P loading at the range below 0.03 g/m$^3$/dwas reduced 50% of Influent T-P conc.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.10a
• /
• pp.58-69
• /
• 2003

Soil contamination in the United States is managed using a risk-based decision making process. In other words, we don't ask, 'how much soil contamination can be cleaned up\ulcorner' Instead we ask, 'how much contamination can be safely left in place\ulcorner' The determination of 'safe' levels of contamination is based upon the potential for exposure and the toxicity of the contaminants of concern in soil. Potential for exposure is determined by evaluating potential exposure pathways from source to receptor given current or reasonably anticipated land use. Soil cleanup goals are then calculated for any complete exposure pathways based upon toxicity and the route of exposure. In some cases, institutional or engineering controls are also used to limit the potential for exposure. In order to prevent a continuous degradation of environmental quality, risk-based cleanup approaches must be combined with strong contamination prevention programs. In addition, alternative risk management approaches should be incorporated into an overall risk reduction strategy.erall risk reduction strategy.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.230-231
• /
• 2018

Recently, the danger for radioactive materials has become a hot topic. Beginning with the Chernobyl nuclear accident in 1996, in 2011, the Fukushima nuclear power plant in Japan suffered major damage such as large-scale casualties and radioactive dangerous area selection. Concerns about leakage of radioactive materials due to recent earthquakes have been deepening in Korea, such as Wolsong Nuclear Power Plant in Gyeongju, and there is a growing interest in the safety of radioactive materials through the media and the media. However, the route to exposure to radioactive materials is not limited to these large-scale nuclear accidents. Typical examples of this are radioactive substances exposed in daily life. In the case of radon gas, the danger is being revealed through current events programs and news, and natural radiation exposure is attracting attention.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.149-156
• /
• 2005

In the actuality that the various services are provided in connection with the network of internet by activating the communication using Propagation, the importance of the feature point and chase of an object is greatly raised to increase the quality of the detection and tracking of the communication service. This paper is to detect the shadow space by using Snakes Algorithms and Present a system's base which tracts the route from start to target points in the detected shadow space as a study for the detection and tracking the shadow space which does not reach the propagation.