• 한국작물학회지
• /
• 제54권3호
• /
• pp.249-259
• /
• 2009

Puroindoline alleles, grain characteristics, milling performances and physical properties of flour of 22 Korean wheat cultivars were evaluated to determine the influence of puroindolines genotypes on grain and flour characteristics and to provide useful information for improving milling and end-use quality in Korean wheat breeding programs. Nine Korean wheat cultivars carried with Pina-D1a/Pinb-D1a, 11 cultivars had Pina-D1a/Pinb-D1b and 2 cultivars were Pina-D1b/Pinb-D1a. Korean wheats carrying with Pina-D1a/Pinb-D1a genotypes showed lower test weight and thousand kernel weight, area and roundness of grain and hardness index in grain characteristics, lower flour yield and higher proportion of break flour in milling performances and lower average particle size of flour, ash and damaged starch content, water retention capacity, yellowness-blueness and higher lightness of flour than wheats with Pina-D1a/Pinb-D1b or Pina-D1b/Pina-D1a genotypes. Pina-D1a/Pinb-D1b genotypes showed lower 1000-kernel weight, grain area, higher average of particle size of flour, higher ash and damaged starch content than Pina-D1b/Pina-D1a genotypes. There was no difference in hardness index of grain, milling performances, flour color between Pina-D1a/Pinb-D1b and Pina-D1b/Pina-D1a genotypes. These results could present the information to improve milling quality and physical properties of flour in Korean wheat breeding programs.

• 한국의류산업학회지
• /
• 제8권6호
• /
• pp.679-686
• /
• 2006

The purposes of this study are to look into the formative characteristics of the bolero and to evaluate the visual effects and images according to changes in the line and length of the connecting lines of the neck, center front, and hem lines from analyzing the bolero style shown in 2005 S/S domestic fashion. Theoretical examination of the bolero was made philologically with reference books, theses and some articles. And the bolero style shown in 2005 S/S domestic fashion was analyzed with pictures from a fashion magazine "Ceci" and a fashion website 'Interfashion Planning" from Feb. to Aug. of 2005. As a result, the basic lines of the bolero are classified into three different categories according to the connecting lines of the neck, center front line, and hem line. We altered the length of the bolero in three categories with the changes in the waistline-5 cm, 8 cm, and 11 cm. For the visual evaluation, 9 stimuli were placed in mannequins, and were estimated by the experts in the fashion design. For the visual evaluation according to changes in the line and length of the bolero, we used 12 pairs of items to find the visual effects, and 13 pairs of adjectives to measure the visual images. The stimuli and adjectives were randomly given to the evaluators and were evaluated by the 7-Point Likert Type Scale. Data we got from this experiment was analyzed statistically by using the SPSS 12.0 and practiced the Factor Analysis and Correlation Analysis. In the current women's garments, the bolero is a new fashion item which combines with jackets or cardigans. Usually the bolero jacket is made out of a cotton, denim, leather or fur, and the bolero cardigan usually used knitted materials. The design could be very varied depending on the roundness of the center front line, and hem line. According to the result of factor analysis of the visual effects of the Bolero, four factors were identified the whole silhouette, neck line, breasts and shoulders. According to the result of factor analysis of the visual image of the Bolero, three factors were identified maturity, tenderness, neatness.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1613-1618
• /
• 2012

자동차용 휠 베어링은 동력을 전달하고 차량의 무게를 지지해주는 중요한 부품으로써 너클에 체결된다. 이때 체결 토크에 의하여 시일 압입부와 궤도부를 포함하는 휠 베어링 외륜의 변형이 발생한다. 본 연구에서는 휠 베어링 외륜의 변형을 유한요소법을 이용하여 해석하였다. 상용 소프트웨어 MSC.MARC 를 이용하였고, 외륜, 볼트, 너클의 체결거동을 보다 정확하게 예측하기 위하여 탄소성 해석과 접촉 해석을 수행하였다. 외륜 플랜지는 가공에 따라서 다소 오목하게 형성될 수 있으며, 이는 너클과의 체결 시 틈새 발생을 유발하여 변형에 영향을 줄 수 있다. 따라서, 본 연구에서는 외륜의 오목한 정도를 변화시키면서 변형 해석을 수행하였다. 해석 결과를 검증 하기 위하여 시험을 수행하였고, 해석과 시험 결과를 비교한 결과 비교적 유사함을 알 수 있었다.

• 패션비즈니스
• /
• 제21권5호
• /
• pp.91-108
• /
• 2017

Interests in 3D virtual clothing technology and its application in online shopping malls are increasing with the advent of the Fourth Industrial Revolution. Most studies on 3D virtual clothing, however, are focused on observing drapes or ease of virtual clothing depending on fabric properties of representative clothing items. Therefore, the purpose of this study is: first, to determine if current input of typical material characteristics in 3D CLO are sufficient to formulate virtual skirts with different front and back silhouettes; second, to determine if subjective appearance evaluation matched physical shape characteristics of those skirts. In this study, appearances of typical cotton, wool, silk, rayon, and polyester skirts with different front and back pattern were compared between actual and virtual clothing depending on fabric materials. Subjective appearance evaluation was conducted by 7 experts regarding similarity between actual and virtual clothing with a 5-point scale. For objective evaluation of the both types of skirt shape, degree of roundness at the cross section, displacement of side seam, position of back waistline, and the number of folds at the skirt back were observed. In the case of cotton and wool, not the subjective appearance evaluation as well as shape characteristics of virtual skirts were well matched to the actual shape of skirts with a few material inputs. However, current material inputs for silk, rayon and polyester were insufficient to cover material differences in formation of virtual skirts with different front and back silhouettes.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.212-223
• /
• 2015

Purpose: Physical properties of Detarium microcarpum seeds were investigated as a function of moisture content to explore the possibility of developing bulk handling and processing equipment. Methods: Seed size, surface area, and 1,000-seed weight were determined by measuring the three principal axes, measuring area on a graph paper, and counting and weighing seeds. Particle and bulk densities were determined using liquid displacement and weight in a measuring cylinder, respectively. Porosity was computed from particle and bulk densities. Roundness and sphericity were measured using shadowgraphs. Angle of repose and static and kinetic coefficients of friction were determined using the vertical cylindrical pipe method, an inclined plane, and a kinetic coefficient of friction apparatus. Results: In the moisture range of 8.2%-28.5% (db), the major, intermediate, and the minor axes increased from 2.95 to 3.21 cm, 1.85 to 2.61 cm, and 0.40 to 1.21 cm, respectively. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose increased from 354.62 to $433.19cm^2$, 3.184 to 3.737 kg, 1060 to $1316kg/m^3$, and 30.0% to 53.1%, respectively, whereas bulk density decreased from 647.6 to $617.2kg/m^3$. Angle of repose increased from $13.9^{\circ}$ to $28.4^{\circ}$. Static and kinetic coefficients of friction varied between 0.096 and 0.638 on different structural surfaces. Conclusions: Arithmetic mean, geometric mean, and equivalent sphere effective diameters determined at the same moisture level were significantly different from each other, with the arithmetic mean diameter being greatest. Surface area, 1,000-seed weight, particle density, porosity, and angle of repose all increased linearly with moisture content. Bulk density decreased linearly with moisture content. The coefficients of friction had linear relationships with moisture content. The highest values of static and kinetic coefficients of friction were observed on galvanized steel and hessian fabric, respectively, whereas the lowest values were observed on fiberglass.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.185-193
• /
• 2003

The object of this study is to observe the effects of magnetism on the osteoblasts using a neodymium magnet. The osteoblasts was cultured under magnetic fields of varying intensities to evaluate the effect of magnetism on the activity and alkaline phosphatase acitivty of the osteoblasts. Osteoblasts were cultured in the cell density of $10^4$ for the evaluation of cell proliferation and 105/ml for the evaluation of ALP activity under 0. 10, 100, 500, 1000, 2000, 4000 gauss for 24 hour. For evaluation of osteoblast morphologic changes under magnetic, osteoblasts were observed by inverted microscope and TEM. To elucidate if IGF-receptors are increased under the magnetic field, we investigated osteoblasts by immunofluoroscence staining. The results were as follows: In the varying intensities of magnetic fields, the degree of cell proliferation was the highest in the magnetic field of 10 gauss and this gradually decreased up to 1000 gauss. In the magnetic fields stronger than 1000 gauss, the degree of the cell proliferation decreased to an even lower level than that of the control group. The ALP activity and protein synthesis showed a similar increase pattern as the degree of cell proliferation compared to the control group but showed little difference. Under the microscope, morphological change of the cells ( decrease in length and increase in roundness) were observed but no peculiarity of cell distribution could be found according to the magnetic field line. In the proper intensity of magnetic fields (10 gauss), the cultured cells showed increase in number of IGF Receptors compared to that of the control group.

• 한국조경학회지
• /
• 제22권1호
• /
• pp.53-63
• /
• 1994

There are lots of forests around the Korean rural village. This study was conducted to investigate the state of the forests by the 15 forests case study of the Kamgok region in Chon-guk-Do province, Korea. The results are as follows. 1. The forests lose mostly original form by the construction of road and forest clearing for the land development business. And almostly the form of the forests is a trapezoid or roundness. 2. The forests were remained on account of the Korean cemetery customs which is burying underground. 3. The conservation of the forests becomes more difficult because of the continuous development pressure. 4. Because the scale of the forests is so small, they aren't named as the natural resort forest by the forest law. So it will be the better alternative that they are conserved and used by inducing the concept of the village resort forest. 5. Because the owenership of the forests exists in a person or a family, the forests will be destructed continuously by the cemetery development. 6. The vegetation of the upper trees in the forests is the simple forests of Pinus densiflora, Pinus rigida and bamboo. The height of upper tree is average 10-12m. And average root diameter is 13-29cm. The age of the tree is average 50 years old. The state of the forests is mostly fine. 7. It is clarified that the price of the forest land is 3-5 times expensive than the other cultivated land. 8. The forests were made by the forefathers for the purpose of the practical use and were reforested in the era 1960s, 1970s.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.952-962
• /
• 2015

열간 링 롤링 공법은 열간단조 후의 잠열을 이용하기 때문에 가공 부하가 적고 최종 환형제품에 가까운 제품을 제조하는 장점이 있다. 본 연구에서는 열간 링 롤링 공법에 의한 대형 직경의 환형 부품의 다중형상 링 제조를 목표로 AFDEX2D 및 AFDEX3D/HEXA/RING 시뮬레이터(simulator)를 이용하여 열간 단조공정부터 링 롤링 공정까지 연계된 공정을 유한요소 해석하였다. 또한 링 롤링공정의 유한요소해석 시간을 줄이기 위해 소성변형이 일어나고 있는 영역에서만 요소망을 조밀하게 재구성하는 이중요소 시스템을 적용하였다. 이 유한요소해석 결과를 바탕으로 실제 공정을 설계하고 실험하여 개발된 제품이 품질 규격을 만족하는지를 확인하였다. 또한 링 롤링 실험 완성품을 통하여 부품의 품질수준 및 공정능력을 평가하였다. 그 결과, 개발된 환형 부품은 40%의 투입재료 감소과 최종 제품의 원소재 회수율이 24% 증가하였다. 또한 링 롤링 제품은 내, 외경의 진원도가 0.5mm로 우수하였으며 공정능력 분석결과 외경 Cpk 1.49, 내경 Cpk 0.85를 확보하여 환형 부품의 다중 형상 열간 링 롤링 공정의 최적화를 실현하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제36권2호
• /
• pp.141-148
• /
• 2013

CT 검사 시 뇌출혈의 부위는 심각한 정도에 따라 인지하기 어려운 경우도 있으며, 응급상황에서 숙련이 되지 않은 의료진에게는 부담을 준다. 응급상황에서 검사와 동시에 뇌출혈부위를 자동으로 빨리 파악하고 정량적인 정보를 제공하는 보조적인 역할은 필요하며, 컴퓨터를 이용한 자동 검출 및 인식 시스템은 출혈부위 진단에 매우 큰 도움을 줄 수 있다. 본 연구에서는 출혈부위를 문턱치값 처리, 모폴로지 연산, 원형률 계산을 접목하여 뇌 출혈부위의 자동검출에 성공하였고 검출 후보군에서 잘 못 선정된 영역을 판정하기위한 주성분분석을 이용한 분류기 개발에 성공하였다. 개발된 시스템을 응급상황의 뇌출혈 환자에게 적용한다면 의료진에게 수술계획을 위한 유용한 정보가 될 것으로 사료된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.467-470
• /
• 2005

There are about 10 motors for tile actuator of the automation system in an auto-mobile recently. The performance of the motor-case is much related to the noise and the vibration of an auto-mobile Multi-Forming process is so much the better than existing deep-drawing or Multi-step forming by press by less cost, installation and staff. But there isn't the specific and general process design, so we aren't good at competition. So in the first step, I want to study about the core design for the multi-forming process. We can access by the elasto-plastic theory and the finite element method, and we use a commercial package of the Deform-2D and, Deform-3D which is based on three-dimensional elasto-plastic finite element, evaluated propriety oi the package. The evaluation of the package propriety was simulated by simple bending example. It was found the elasto-plastic theory was mostly in agreement with the simulation. We proposed that three type of section for the core and analyzed by finite element method (Deform-2D). We can get the best result with the ellipse type core. Then we apply the result of the preceding analysis to the finite element method (Deform-3D). In 3D-finite element analysis, we can get the result of 8/100mm-roundness. This result can help the improvement of the multi-forming process.