• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.61-70
• /
• 2012

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaing (BR) and bark-remaining- coating (BRC) treatments were evaluated during air circulating oven-drying of hollowed round-post of Korean red pine. Hollowed round-post could be dried from the green condition to approximately 6% MC within 84 to 156 hours for the UC, HCO and VD specimens and it took 72 to 240 hours to about 8% MC, which is recommended as the indoor in-use MC. The temperatures in the hole of the Control (UC) and HCO specimens constantly showed a higher-leveled distribution pattern than those inside wood. The vapor pressure in the hole of the UC, HCO and BR specimens was higher than that inside wood and showed difference as highest value of about 20 mbar. The surface checks of all specimens were mild and were observed in increasing order of BRC, BR, UC, VD and HCO specimens.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.5
• /
• pp.390-397
• /
• 2011

In this study, bending test was conducted as beam members in timber roadside safety barrier. The flexural properties of pitch pine round timber according to the diameters were evaluated. And then grading based on the growth characteristics applied to choosing the pitch pine round timbers which is met the criteria of guideline (Japan, 2008). MOR of round timber 160 mm is higher than other specimens from 100 mm to 140 mm. Because of lower juvenile wood ratio and higher density. The MOE of round timber is decreased according to the increment of diameter. Only 32% of the specimens has passed the limitations. Performance of pitch pine round timbers has confirmed to suitability roadside safety beam members according to the guideline (Japan, 2008).

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.101-111
• /
• 2014

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaining (BR) and bark-remaining-coating (BRC) treatments on the air circulating oven-drying characteristics of Japanese larch hollowed round-post was evaluated. The drying times of the hollowed round-posts for control, VD, HCO and BR specimens were 72, 168, 204 and 240 hours, respectively, from the initial MC to about 8% MC, which was recommended as the indoor in-use MC. The temperature in the hole of the VD specimen was lower than that of wood and the difference between air temperature in the hole and wood temperature became large during drying period. The vapor pressure of air in the hole was higher than that of inside wood for all specimens except VD specimen. The surface checks on all specimens were observed in increasing order of BR, BRC, UC, HCO and VD specimens.

• Journal of Korean Society of Forest Science
• /
• v.102 no.4
• /
• pp.484-490
• /
• 2013

This study was conducted to develop a simulation model for estimating the amount of such products as round wood, dimension lumber and the residual wood biomass produced by processing the individual trees of Larix kaempferi. In the model, the stem volume is assessed using the taper equations of the species to estimate the stem forms. Then, the model simulates the conversion processes of logs to round wood or lumber and assesses the maximum amount of the wood products by the lumber dimensions or round wood size. Also the model provides information on the amount of residuals for kerf and slabs produced on the conversion processes for sawn timber or round wood. According to the results of an application of the model to a L. kaempferi process, the trees greater than 12 cm of DBH can be converted to logs for lumber or round wood production. For the trees, of which DBH is available for log conversion, the maximum amount of final products by dimensions were analyzed. In this analysis, production of the bigger dimension lumber was assumed to be preferred to that of the smaller or round wood. This model can be used for assesment of forest economic value through estimation of merchantable volume for the trees, and assessment of mill residues which has the potential to provide significant amount of feedstock for bioenergy production as well.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.8-16
• /
• 2005

In an effort to encourage the development of value added engineered applications for small diameter round timber, research is being conducted to develop and verify design guidelines for connections with specific application to round timbers. The objective of this research is to provide potential users with a number of viable connection options applicable in the fabrication of engineered, round wood structural components and systems. Target uses include trusses, built up flange beams and space frames. This paper presents information on a mortised steel plate connection fabricated using powder driven nails in 6 cm diameter Japanese Larch. The design load for PDN connections are around 1.3 kN per nail with strip and 0.8 kN per nail without stripe. The design model for PDN connectors could be chosen by the number of nails. If the number of nails are more than the critical number between nail bearing and wood failure, the wood failure model could be the way to design the structure safely. The wood failure model needs to be studied more but the model could be the tensile and cleavage mixed failure model.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.85-92
• /
• 2008

Strength of logs and round posts is compared and analyzed to estimate the strength of the incised Larix round posts treated with CCA in this paper. There is no significant difference in MOR of logs and round posts. However, in the incised Larix round posts treated with CCA MOE is decreased to about 9%, and there is 29% reduction in MOR as strength ratio is 0.71. When calculating the allowable bending stress of incised round type round posts, not in nominal 2-in timbers, an adjustment factor for MOE and bending strength is proposed as 0.91 and 0.71, respectively. Logs, round posts and the incised Larix round posts treated with CCA do not show significant difference in nail withdrawal load. There is almost no difference between incised Larix round posts treated with CCA and round posts in the shear strength of bolted joint. When calculating the allowable shear stress of bolted joint, it is conformed that considering the application of incising factor is not necessary.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.2
• /
• pp.125-131
• /
• 2011

The characteristics of radio-frequency/vacuum drying Japanese larch boxed heart round logs with 150 mm and 210 mm in diameter and 2,500 mm in length, subjected to compressive loading, after the pretreatment of kerf were investigated. The results of this study were as the follows: The drying time of about 120 hours~130 hours was needed from green to about 15 percent of moisture content. The gradient of final moisture content for all specimens was very gentle in both longitudinal and transverse directions owing to dielectric heating. The surface checks seriously occurred although the occurrence extent of surface check for the kerfed specimens was slight compared with that for the control specimens because drying stress was relieved by kerf. The occurrence of surface checks for the L-specimen was more serious than that for the S-specimen.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.1
• /
• pp.44-52
• /
• 2012

This study examined the effects of the drying rate, temperature distribution and vapor pressure on the surface checks occurring during the air circulating oven-drying of hollowed short Japanese larch (Larix Kaemferi C.) round posts treated with coating (CO) and vapor-dam (VD). The hollowed round posts could be dried from the green condition to a moisture content of approximately 8% in 72 to 144 hours. The temperature in the hole was higher than that inside of wood for Control and VD specimens, while VD specimen showed opposite distribution. The vapor pressure inside the wood was higher than that in the hole for the CO and VD specimens during hole drying stage. There were few surface checks found in the specimens but the number increased in order the of CO, VD and Control specimens.

• New & Renewable Energy
• /
• v.18 no.4
• /
• pp.70-78
• /
• 2022

To respond to global warming, there is an increasing interest in eco-friendly alternative energy sources. Therefore, unused forest biomass that has been neglected due to a lack of marketability is attracting attention. With the introduction of the "unused forest biomass certification system" in 2019, ways of determining quantity of unused forest biomass have steadily increased. However, there have been reported cases whereby unused forest biomass weighed more than the amount of harvested trees. It was found that it was possible that forest resources that can be used as round wood were mixed with unused forest biomass. In this context, this study aimed to estimate the amount of mixed round wood in the unused forest biomass supply. The relative expression of growing stock/ha versus the amount of final clearing/ha collected was modeled (y=1.490x-94.341, R²=0.861). As a result, it was found that round wood was mixed into the unused forest biomass, contributing to the disparity observed between the weighted forest biomass and the amount of trees harvested. In conclusion, proper declaration and certification procedures should be carried out for the use of forest resources and promoting unused forest biomass usage.

• Journal of the Korea Furniture Society
• /
• v.13 no.1
• /
• pp.71-83
• /
• 2002

This study was carried out to develop colored-wood furniture using veneer, small-round log and fiberboard to protect forest resources through the study of minimalism. which advocates the environmental issue inherent to contemporary furniture in the postmodern era. Based on the historical and theoretical context of minimalism closely related to the environmental protection, this study suggested the technical way how to produce the environment-friendly furniture with the least use of valuable and natural log. Finally, the color-wooden furniture was developed based on the asceticism, simplification, and repetition of the minimalism in a trend of contemporary furniture design. By soaking a veneer, Psuedotsuga menziesii and small-round log, Pinus densiflora into a very-diluted organic dye, the environment-friendly and colored-wood furniture could be created in harmony with contemporary interior space, which has showed various colors such as yellow, blue, red, and green with a pastel tone. The spring wood of the colored softwood was deeply stained, while the summer wood was lightly done. By utilizing such valueless used woods which have been little in furniture production, it was possible to decrease the consumption of precious raw log such as zelkova, ebony, rose, maple, cherry, mahogany and so on. Thus, it became obvious to be able for contemporary furniture designers to produce beautiful furniture with dyed fiberboard and small-round logs pregnant with minimalism.