• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.61-70
• /
• 2012

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaing (BR) and bark-remaining- coating (BRC) treatments were evaluated during air circulating oven-drying of hollowed round-post of Korean red pine. Hollowed round-post could be dried from the green condition to approximately 6% MC within 84 to 156 hours for the UC, HCO and VD specimens and it took 72 to 240 hours to about 8% MC, which is recommended as the indoor in-use MC. The temperatures in the hole of the Control (UC) and HCO specimens constantly showed a higher-leveled distribution pattern than those inside wood. The vapor pressure in the hole of the UC, HCO and BR specimens was higher than that inside wood and showed difference as highest value of about 20 mbar. The surface checks of all specimens were mild and were observed in increasing order of BRC, BR, UC, VD and HCO specimens.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.390-397
• /
• 2011

In this study, bending test was conducted as beam members in timber roadside safety barrier. The flexural properties of pitch pine round timber according to the diameters were evaluated. And then grading based on the growth characteristics applied to choosing the pitch pine round timbers which is met the criteria of guideline (Japan, 2008). MOR of round timber 160 mm is higher than other specimens from 100 mm to 140 mm. Because of lower juvenile wood ratio and higher density. The MOE of round timber is decreased according to the increment of diameter. Only 32% of the specimens has passed the limitations. Performance of pitch pine round timbers has confirmed to suitability roadside safety beam members according to the guideline (Japan, 2008).

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.101-111
• /
• 2014

In this study the effect of heartwood-coating (HCO), vapor-dam (VD), bark-remaining (BR) and bark-remaining-coating (BRC) treatments on the air circulating oven-drying characteristics of Japanese larch hollowed round-post was evaluated. The drying times of the hollowed round-posts for control, VD, HCO and BR specimens were 72, 168, 204 and 240 hours, respectively, from the initial MC to about 8% MC, which was recommended as the indoor in-use MC. The temperature in the hole of the VD specimen was lower than that of wood and the difference between air temperature in the hole and wood temperature became large during drying period. The vapor pressure of air in the hole was higher than that of inside wood for all specimens except VD specimen. The surface checks on all specimens were observed in increasing order of BR, BRC, UC, HCO and VD specimens.

• 한국산림과학회지
• /
• 제102권4호
• /
• pp.484-490
• /
• 2013

본 연구는 낙엽송 개체목의 가공처리 과정에서 생산되는 제재목 및 제재 부산물의 양을 분석하기 위한 시뮬레이션 모델을 개발하고자 수행되었다. 이 모델에서는 수간곡선 추정식을 이용하여 개체목의 전간재적을 산출하고 절동된 원목에 대한 목재 가공 시뮬레이션을 통해 판재 및 각재, 원주목의 규격에 따른 최대 생산가능량을 예측하였다. 또한 제재목 가공처리 과정에서 생산되는 톱밥 및 죽데기의 잔존재적에 대한 분석을 수행하였다. 그 결과 흉고직경 12 cm 이상부터 제재목의 생산이 가능한 것으로 나타났고, 제재목의 생산이 가능한 경우에는 보다 큰 규격의 판재와 각재를 생산하는 것이 상대적으로 작은 규격의 판재와 각재 혹은 원주목을 생산하는 것에 비해 더 많은 생산량을 얻을 수 있었다. 향후 이 모델은 낙엽송의 이용재적 산출을 통한 산림의 경제적 가치평가는 물론, 최근 목질계 바이오에너지 자원으로서 그 중요성이 점차 높아지고 있는 톱밥과 같은 제재 부산물의 양을 예측하는 데에도 활용될 수 있을 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권2호통권130호
• /
• pp.8-16
• /
• 2005

In an effort to encourage the development of value added engineered applications for small diameter round timber, research is being conducted to develop and verify design guidelines for connections with specific application to round timbers. The objective of this research is to provide potential users with a number of viable connection options applicable in the fabrication of engineered, round wood structural components and systems. Target uses include trusses, built up flange beams and space frames. This paper presents information on a mortised steel plate connection fabricated using powder driven nails in 6 cm diameter Japanese Larch. The design load for PDN connections are around 1.3 kN per nail with strip and 0.8 kN per nail without stripe. The design model for PDN connectors could be chosen by the number of nails. If the number of nails are more than the critical number between nail bearing and wood failure, the wood failure model could be the way to design the structure safely. The wood failure model needs to be studied more but the model could be the tensile and cleavage mixed failure model.

• Journal of the Korean Wood Science and Technology
• /
• 제36권3호
• /
• pp.85-92
• /
• 2008

본 연구에서는 인사이징 처리 낙엽송 방부 원주목의 강도 성능을 평가하기 위하여 원목, 원주목과 강도 성능을 비교 분석하였다. 원목과 원주목의 휨강도(MOR)는 큰 차이가 없었다. 인사이징 처리 방부 원주목은 휨탄성 계수(MOE)가 9% 감소하였고 휨강도는 원목에 대한 강도비 0.71로 약 29% 강도의 저하를 보였다. 일반적인 2인치 제재목이 아닌 원주 형태의 원주목을 이용한 휨허용응력 산정시 인사이징 방부처리 저감계수를 휨탄성계수는 0.91, 휨강도는 0.71로 적용해야 할 것으로 사료된다. 못뽑기 저항은 원목, 원주목, 방부 원주목 모두 큰 차이를 보이지 않았다. 볼트 접합부의 전단력은 인사이징 처리 방부 원주목과 원주목의 차이는 거의 나타나지 않았다. 볼트 접합부의 허용 전단 내력 산정에는 인사이징 저감 계수의 적용은 검토하지 않아도 됨을 확인할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.125-131
• /
• 2011

The characteristics of radio-frequency/vacuum drying Japanese larch boxed heart round logs with 150 mm and 210 mm in diameter and 2,500 mm in length, subjected to compressive loading, after the pretreatment of kerf were investigated. The results of this study were as the follows: The drying time of about 120 hours~130 hours was needed from green to about 15 percent of moisture content. The gradient of final moisture content for all specimens was very gentle in both longitudinal and transverse directions owing to dielectric heating. The surface checks seriously occurred although the occurrence extent of surface check for the kerfed specimens was slight compared with that for the control specimens because drying stress was relieved by kerf. The occurrence of surface checks for the L-specimen was more serious than that for the S-specimen.

• Journal of the Korean Wood Science and Technology
• /
• 제40권1호
• /
• pp.44-52
• /
• 2012

낙엽송 원통형 원주목에 대하여 수증기댐처리와 코팅처리를 실시하여 오-븐건조 하면서 건조속도, 재내의 수증기압 및 재온분포 및 건조할렬 등을 조사한 결과는 다음과 같다. 생재에서 난방된 실내의 이용함수율 수준인 함수율 약 8%까지 건조하는데 72~144시간 소요되었다. 무처리재와 코팅처리재는 전 건조기간에 걸쳐 통공층의 온도가 통피층의 온도보다 항상 높은 분포모형을 보인 반면, 수증기댐처리재의 경우 통피층의 온도가 통공층보다 높거나 같은 분포를 보였다. 수증기댐처리재와 코팅처리재의 경우는 거의 전 건조기간에 걸쳐 통피층의 수증기압이 통공층 보다 큰 분포를 보였다. 총체적으로 할렬발생 정도는 미약하였으며 할렬개수는 코팅처리재, 수증기댐처리재, 무처리재의 순으로 양호한 것으로 나타났다.

• 신재생에너지
• /
• 제18권4호
• /
• pp.70-78
• /
• 2022

To respond to global warming, there is an increasing interest in eco-friendly alternative energy sources. Therefore, unused forest biomass that has been neglected due to a lack of marketability is attracting attention. With the introduction of the "unused forest biomass certification system" in 2019, ways of determining quantity of unused forest biomass have steadily increased. However, there have been reported cases whereby unused forest biomass weighed more than the amount of harvested trees. It was found that it was possible that forest resources that can be used as round wood were mixed with unused forest biomass. In this context, this study aimed to estimate the amount of mixed round wood in the unused forest biomass supply. The relative expression of growing stock/ha versus the amount of final clearing/ha collected was modeled (y=1.490x-94.341, R²=0.861). As a result, it was found that round wood was mixed into the unused forest biomass, contributing to the disparity observed between the weighted forest biomass and the amount of trees harvested. In conclusion, proper declaration and certification procedures should be carried out for the use of forest resources and promoting unused forest biomass usage.

• 한국가구학회지
• /
• 제13권1호
• /
• pp.71-83
• /
• 2002

This study was carried out to develop colored-wood furniture using veneer, small-round log and fiberboard to protect forest resources through the study of minimalism. which advocates the environmental issue inherent to contemporary furniture in the postmodern era. Based on the historical and theoretical context of minimalism closely related to the environmental protection, this study suggested the technical way how to produce the environment-friendly furniture with the least use of valuable and natural log. Finally, the color-wooden furniture was developed based on the asceticism, simplification, and repetition of the minimalism in a trend of contemporary furniture design. By soaking a veneer, Psuedotsuga menziesii and small-round log, Pinus densiflora into a very-diluted organic dye, the environment-friendly and colored-wood furniture could be created in harmony with contemporary interior space, which has showed various colors such as yellow, blue, red, and green with a pastel tone. The spring wood of the colored softwood was deeply stained, while the summer wood was lightly done. By utilizing such valueless used woods which have been little in furniture production, it was possible to decrease the consumption of precious raw log such as zelkova, ebony, rose, maple, cherry, mahogany and so on. Thus, it became obvious to be able for contemporary furniture designers to produce beautiful furniture with dyed fiberboard and small-round logs pregnant with minimalism.