• Corrosion Science and Technology
• /
• 제8권5호
• /
• pp.193-196
• /
• 2009

For the estimation of uncertainty in potentiodynamic polarization resistance measurement, the type A uncertainty was measured using type 316 stainless steel in an acidified NaCl solution. Sensitivity coefficients were determined for measurand such as scan rate of potential, temperature of solution, concentration of NaCl, concentration of HCl, surface roughness of specimen and flow rate of purging gas. Sensitivity coefficients were large for the measurand such as the scan rate of potential, temperature of solution and roughness of specimen. However, the sensitivity coefficients were not the major factors influencing the combined standard uncertainty of polarization resistance due to the low values of uncertainty in measurements of the measurands. A major influencing factor was the concentration of NaCl. The value of type A uncertainty was 1.1 times the value of type B uncertainty, and the combined standard uncertainty was 10.5 % of the average value of polarization resistance.

• 한국의류산업학회지
• /
• 제4권3호
• /
• pp.273-283
• /
• 2002

In this study, the correlations of the two frictional testers have been investigated; one is the KES-FB4 system, the other is the Fabric-on-Fabric Frictional tester which was devised by authors. According to the results, the correlation between the frictional coefficients measured by the two testers has been shown highly as the load increased. But the effect of roughness of fabric surface was not dearly revealed in this study. The frictional characteristics of fabric woven from filament yarns were different with those of fabric woven from spun yarns. And, like the other materials, the effect of load on fabrics used in this experiment was related with the frictional force between two fabrics. The frictional behaviors, however, were obviously different with harder material because the frictional coefficients were not constant as the load increased.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 가을 학술발표회 논문집
• /
• pp.245-252
• /
• 2002

The roughness of Joomoonjin sand and the Dongchun river sand was analysed by the fractal theory. It was found that the fractal dimension(D$\_$F/) of Joomoonjin sand is a little smaller than the Dongchun river sand. That means Joomoonjin sand is smoother than the Dongchun river sand. The measurements of D$\_$F/ of different fraction of the Donchun river sand showed that large particles were rougher than fine particles. The shapes of both sands were analysed by the Discrete Fourier Transform(DFT) and the Grid-based(GB) method. Normalization of coefficients with respect to size, starting point and its orientation made the coefficients invaried to these characteristics. The mean of the normalized coefficients was used to reconstruct the average shape for both sands, respectively. The measurements of the ellipticity ratio of different fraction of both sands showed that Joomoonjin sand is slightly flatter than the Dongcun river sand.

• 한국수자원학회논문집
• /
• 제45권2호
• /
• pp.137-149
• /
• 2012

본 연구는 흐름 저항에 대한 분석을 위해 초본 281개, 관목 150개, 교목 308개의 현장실측 자료로 구성된 739개 식생하천을 대상으로 수행되었다. 실측자료의 Manning 조도계수 분포는 초본자료에서 0.015~0.250, 관목자료에서 0.016~0.250, 교목자료에서 0.018~0.310의 범위를 갖는다. 이들 조도계수의 중요한 분포경향은 Darcy-Weisbach (또는 Manning의 조도계수)와 유량, 마찰경사 및 상대 잠수비에 대한 관계식으로 제시하였다. 식생하천에서 Darcy-Weisbach와 Manning 조도계수에 관한 회귀 방정식은 $f_{veg}=0.436Q^{-0.363}$, $f_{veg}=3.305S_f^{0.508}$와 $n_{veg}=0.061Q^{-0.124}$, $n_{veg}=0.144S_f^{0.199}$ 및 $V=5.3(h/d_{50})^{1/8.3}{\sqrt{ghS_f}}$, $\sqrt{8/f}(=V/u_*)=5.75log(5h/d_{50})$로 유도되었다. 이들 반 경험적 관계식은 수공 실무에서 유용하게 사용될 것이다.

• 지질공학
• /
• 제14권4호
• /
• pp.461-468
• /
• 2004

이 연구에서는 암반 내 절리면의 거칠기 정도에 따른 수리특성의 차이를 규명하고자 Barton(1976)이 제안한 절리면 거칠기 계수(Joint Roughness Coefficient; JRC) 등급별로 투수계수를 산정하였다. 이를 위하여 JRC등급 형태별로 고속퓨리에 변환을 이용한 스펙트럼 분석을 실시하여 각 거칠기 등급별로 영향력 이 큰 주파수 성분을 추출하였다. 스펙트럼 분석결과 낮은 JRC 등급을 갖는 절리들이 높은 등급의 절리들보다 저주파 성분이 더 강하게 구성되어 있으며, 높은 JRC등급의 절리들은 상대적으로 고주파 성분이 더 크게 차지하는 것을 알 수 있었다. 스펙트럼 성분 중에서 영향력이 큰 주파수 성분만을 이용하여 퓨리에 역변환을 실시해 JRC 등급별 절리 모델을 생성하였다. 생성된 절리 모델은 거칠기 성분을 포함한 모델로써, 균질화 해석기법을 이용하여 각 모델의 투수계수를 산정하였다. 균질화 해석법은 섭동이론을 적용한 것으로서, 미시규모(microscale) 매질특성과 거시규모(macroscale) 매질특성을 동시에 고려하여 투수계수를 계산할 수 있으므로 균열 기하양상의 국부적 영향을 고려한 투수특성을 정확히 해석할 수 있다. 균질화 해석법을 이용해 투수계수를 산정한 결과, 절리 간극이 동일한 평행판 모델을 가정한 JRC 등급별 투수계수는 $10^{-3}\~10^{-4}m/sec$의 범위에 분포한다. 반면, 전단변형이 발생한 것을 가정한 모델에서는 $10^{-4}\~10^{-5}m/sec$의 범위에 투수계수가 분포한다. 이 경우는 투수계수 분포가 일정한 변화양상을 보이지 않고 JRC등급에 따라 불규칙적인 투수계수 분포를 보인다. 동일한 크기의 간극을 갖는 경우임에도 불구하고 JRC 등급별로 투수계수의 차이가 발생하거나 전단변위에 따라 투수계수가 불규칙적으로 분포하는 것은 거칠기 변화가 투수계수의 변화에 영향을 미침을 지시하는 것으로서, 이 연구를 통해 암반내 절리 등 균열을 따른 수리특성 규명에 있어 절리면 거칠기의 영향은 반드시 고려되어야 함을 알 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권1호
• /
• pp.1-12
• /
• 1996

The fully developed tubulent momentum and heat transfer induced by the square- ribbed roughness elements on both the inner and outer wall surfaces in the concentric annuli are studied analytically based on a modified turbulence model. Heat transfer coefficients for two conditions, i.e, a) inner wall heated as constant heat flux and outer wall insulated b) inner wall insulated and outer wall heated as constant heat flux, are investigated. The analytical results of the fluid flow are verified by experiment. The experiment is done with a pitot tube and a X-type hot wire anemometer to measure the time mean velocity profiles, zero shear stress positions, maximum velocity profiles and friction factors, and etc. The resulting momentum and heat transfer are discussed in terms of various parameters, such as the radius ratio, the relative roughness, the roughness density, Nusselt number and Prandtl number.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.427-436
• /
• 2008

This paper presents radar remote sensing of soil moisture and surface roughness for vegetated surfaces. A precise volume scattering model for a vegetated surface is derived based on the first-order radiative transfer technique. At first, the scattering mechanisms of the scattering model are analyzed for various conditions of the vegetation canopies. Then, the scattering model is simplified step by step for developing an appropriate inversion algorithm. For verifying the scattering model and the inversion algorithm, the polarimetric backscattering coefficients at 1.85 GHz, as well as the ground truth data, of a tall-grass field are measured for various soil moisture conditions. The genetic algorithm is employed in the inversion algorithm for retrieving soil moisture and surface roughness from the radar measurements. It is found that the scattering model agrees quite well with the measurements. It is also found that the retrieved soil moisture and surface roughness parameters agree well with the field-measured ground truth data.

• 펄프종이기술
• /
• 제38권3호
• /
• pp.1-6
• /
• 2006

The increasing use of newsprints in the media and an advertisement have brought the needs to improve the printing quality of the advance full-color newspaper. The printability coefficients used in this research such as Ymax for the density and Tollenaar's density smoothness constant value $\ulcorner$m$\lrcorner$ were introduced early in Europe and have been in use to control printing quality. In order to improve printing quality of domestic full-color newsprints, those printability coefficients could be used to control printing quality. This study was carried out to measure the printability coefficients of domestic full-color newspapers. Four kinds of domestic newspapers and two kinds of newspaper printing inks were tested by IGT printability tester. The printed density smoothness coefficient $\ulcorner$m$\lrcorner$ value showed good results when the samples have low porosity and roughness. The printability coefficients obtained are expected to be useful to the korean newspaper printing industry.

• Journal of Mechanical Science and Technology
• /
• 제20권7호
• /
• pp.1077-1088
• /
• 2006

This paper describes a numerical investigation on the performance deteriorations of a low speed, single-stage axial turbine due to use of rough blades. Numerical calculations have been carried out with a commercial CFD code, CFX-Tascflow, by using a modified wall function to implement rough surfaces on the stator vane and rotor blade. To assess the stage performance variations corresponding to 5 equivalent sand-grain roughness heights from a transition ally rough regime to a fully rough regime, stage work coefficient and total to static efficiency were chosen. Numerical results showed that both work coefficient and stage efficiency reduced as roughness height increased. Higher surface roughness induced higher blade loading both on the stator and rotor which in turn resulted in higher deviation angles and corresponding work coefficient reductions. Although, deviation angle changes were small, a simple sensitivity analysis suggested that their contributions on work coefficient reductions were substantial. Higher profile loss coefficients were predicted by higher roughness heights, especially on the suction surface of the stator and rotor. Furthermore sensitivity analysis similar to the above, suggested that additional profile loss generations due to roughness were accountable for efficiency reductions.

• 한국방재학회 논문집
• /
• 제8권3호
• /
• pp.137-147
• /
• 2008

본 연구는 운동량방정식을 이루는 각 항의 상대적 크기를 해석적 방법으로 비교분석하였다. 운동량방정식의 매개변수인 하상 경사와 조도계수를 유출영향인자로 하여 각항의 시간적 변화를 분석하였다. 국지가속도와 대류가속도항의 크기는 서로 상쇄되는 경향을 보이며, 중력항을 제외한 나머지항들의 첨두치 발생시각은 수문곡선 상승부의 변곡점 발생시각과 일치함을 알 수 있다. 각 항의 상대적 크기는 하도특성에 따라 변하며, 특히 완경사 하천과 조도계수가 큰 경우는 압력항을 무시할 수 없음을 알 수 있다.