• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.205-209
• /
• 2005

Now a days Automobiles are becoming more important in our life, the study on piston of engine is needed because, piston's cooling and lubrication of piston have an effect on the life and efficiency of engine directly. So, this study is about nozzle part of oil jet for cooling piston in the automotive engine. Piston exposes combustion gas of over $2000^{\circ}C$ and is shocked high pressure at the time of explosion shortly. Furthermore strong friction occurs by high speed rotation. The cooling system is considered from oil jet to piston. The previous system cooled the lower part of piston only. So, efficiency was low. To improve this system, make the oil gallery in the piston, and oil flows into the gallery. The value of oil flow rate into the gallery is important. Consequently, the point of this study is the research of investigation of flow characteristics for variable Re number. This study has been modelled by a commercial CFD code FLUENT, allowing to assess its validity

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.279-282
• /
• 2012

In this paper, a hardware architecture of phase calculator for 3D image processing is proposed. The designed phase calculator, which adopts a pipelined architecture to improve throughput, performs arctangent operation using vectoring mode of CORDIC algorithm. Fixed-point MATLAB modeling and simulations are carried out to determine the optimized bit-widths and number of iteration. Phase calculator designed in Verilog HDL is verified by emulating the restoration of virtual 3D data using MATLAB/Simulink and FPGA-in-the-loop verification.

• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.147-155
• /
• 2011

This paper presents an edutainment robot for young children. The edutainment robot called 'Mon-e' has developed by the Central R&D Laboratory at KT. The main services of the Mon-E robot are autonomous moving service, object card and story book telling service and videophone service. The RFID technology was introduced for easy interface to young children. The face of Mon-E robot is mounted with an RFID reader. The RFID tag is pasted on story book and object card. If you approach a book or an object card to the face of Mon-E, the Mon-E robot recognizes the identified code and plays its service. In autonomous moving, if the Mon-E robot meets obstacles, it moves back and turns left or right or half rotation. In videophone service, if young children approach an RFID card to the Mon-E, the Mon-E can make a call to the specific number, which is contained in the RFID card. The developed Mon-E robot has tested in real world environment and is evaluated young children and their parents. In the result of evaluation, the feeling of satisfaction was high to main services of Mon-E robot.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.841-849
• /
• 2001

The pixel information of the object was obtained sequentially and pixels were clustered to a label by the line labeling method. Feature points were determined by finding the slope for edge pixels after selecting the fixed number of edge pixels. The slope was estimated by the least square method to reduce the detection error. Once a matching point was determined by comparing the feature information of the object and the pattern, the parameters for translation, scaling and rotation were obtained by selecting the longer line of the two which passed through the matching point from left and right sides. Finally, modified Hausdorff Distance has been used to identify the similarity between the object and the given pattern. The multi-label method was developed for recognizing the patterns with more than one label, which performs the modified Hausdorff Distance twice. Experiments have been performed to verify the performance of the proposed algorithm and method for simple target image, complex target image, simple pattern, and complex pattern as well as the partially hidden object. It was proved via experiments that the proposed image matching algorithm for recognizing the object had a good performance of matching.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.4
• /
• pp.40-46
• /
• 2006

The market of programmable implantable pumps has bound to a monopolistic situation, inducing high device costs, thus making them inaccessible to most patients. Micro-mechanical and medical innovations allow improved performances by reducing the dimensions. This affects the consumption and weight, and, by reducing the number of parts, the cost is also affected. This paper presents the procedure followed to design an innovative implantable drug delivery system. This drug delivery system consists of a low flow pump which shall be implanted in the human body to relieve pain. In comparison to classical known solutions, this pump presents many advantages of high interest in both medical and mechanical terms. The first section of the article describes the specifications which would characterize a perfect delivery system from every points of view. This concerns shape, medication, flow, autonomy, biocompatibility, security and sterilization ability. Afterwards, an overview of existing systems is proposed in a decisional tree. Positive displacement motorized pumps are classified into three main groups: the continuous movement group, the fractioned translation group and the alternative movement group. These systems are described and the different problems which are specific to these mechanisms are presented. Since none of them fully satisfy the specifications, an innovation is justified.. The decisional tree is therefore extended by adding new principles: fractioned refilling and fractioned injection within the fractioned translation movement group, spider guiding system within the alternative translation movement group, rotational bearing guided device and notch hinge guided device in the alternative rotation movement group.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.137-146
• /
• 1997

Spray characteristics of high pressure injectors for diesel engines have been experimentally studied with special emphasis on the effect of swirl. A constant volume chamber was rotated in order to generate a continuous swirl having the flow field of a solid body rotation, resulting in the linear dependance of the swirl number on the rotating speed of the chamber. Emulsified fuel is injected into the chamber and the developing process of fuel sprays is visualized. The fuel spray developing process in D.I. diesel engine was investigated by this liquid injection technique. The effect of swirl on the spray tip penetration is quantified through modelling. Results show that the spray tip penetration is qualitatively different for low and high pressure injections. For high pressure injection case, a good agreement is achieved between the experimental results and the modeling accounting the effect of swirl. For low pressure injection, a reasonable agreement is obtained. It is found that excessive swirl may cause adverse effect on spray dispersion during the initial combustion period since the spray can not be impinged on chamber wall.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.1
• /
• pp.60-66
• /
• 2005

Pod shape of twenty soybean (Glycine max L. Merrill) genotypes was evaluated quantitatively by image analysis using elliptic Fourier descriptors and their principal components. The closed contour of each pod projection was extracted, and 80 elliptic Fourier coefficients were calculated for each contour. The Fourier coefficients were standardized so that they were invariant of size, rotation, shift, and chain code starting point. Then, the principal components on the standardized Fourier coefficients were evaluated. The cumulative contribution at the fifth principal component was higher than $95\%$, indicating that the first, second, third, fourth, and fifth principal components represented the aspect ratio of the pod, the location of the pod centroid, the sharpness of the two pod tips and the roundness of the base in the pod contour, respectively. Analysis of variance revealed significant genotypic differences in these principal components and seed number per pod. As the principal components for pod shape varied continuously, pod shape might be controlled by polygenes. It was concluded that principal component scores based on elliptic Fourier descriptors yield seemed to be useful in quantitative parameters not only for evaluating soybean pod shape in a soybean breeding program but also for describing pod shape for evaluating soybean germplasm.

• Journal of KIISE:Software and Applications
• /
• v.28 no.10
• /
• pp.764-772
• /
• 2001

This paper describes fingerprint matching algorithm using connected information between minutiae. We regard minutiae as ridge bifurcation and ridge ending. Features are composed of minutia's position, type(ridge bifurcation or ridge ending) ridge direction and connected ridge information. While the minutiae are extracted, we store connected in information between minutiae on the same ridge. They are used to find corresponding point pairs. Minutiae are aligned completely by two corresponding point pairs and point pattern matching is achieved by counting the number of overlapping pairs. It is invariable t translation and rotation. We have tested proposed method on the 445 fingerprints from 89 persons. These experimental results show that proposed algorithm improve 33% in speed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.1
• /
• pp.55-63
• /
• 1997

A numerical investigation has been made for flows in an axisymmetric circular cylinder with an impulsively rotating cone located at the bottom of the container. The axisymmetric container is completely filled with a viscous fluid. Major parameter for the present research is only the vertex angle of the cone, otherwise Reynolds number and aspect ratio of the vessel are fixed. Main interest concerns on the vortex breakdown of meridional circulation by impulsive rotation of the cone with respect to the longitudinal axis of the cylinder. Numerical method has been used to integrate momentum and continuity equations on a generalized body-fitted grid system. The pattern of vortex breakdown is quite different from that in a right circular cylinder with flat endwall disks. The flow visualization photograph of the preceeding work by Escudier is compared with the present numerical results and the two results are in good agreements. Also flow data are plotted to gain a deep understanding for the present phenomena of the vortex breakdown. The conclusions of this work are clearly explained by the classical theory of the vortex flows in a finite geometry.

• The Journal of Korean Society for Radiation Therapy
• /
• v.6 no.1
• /
• pp.146-153
• /
• 1994

A modified irradiation technique utilizing a linear accelerator for radiation surgery within the brain was performed in 41 cases of patients with anteriovenous malformation(AVM), astrocytoma, meningioma. etc. The treatment planning and dosimetry of small field for stereotactic radiosurgery with 10 MV X-ray isocentically mounted linear accelerator will be presented dose with field size, the central axis persent depth dose and the combined moving beam dose distribution. The three dimensional dose planning of stereotactic focusing irradiation on small size tumor region was perfomed with dose planning computer system(Therac 2300) and was verified with film dosimetry. The more the number of strip and the wider the angle of arc rotation, the larger were the dose delivered on tumor and the less the dose to surrounding the normal tissues. In this study, the using machine and method was as fellowing. 1) Apparatus : NELAC-1018 10MV X-ray 2) Strip No. : Select the 5-7 strips 3) Cone and field size are from $1{\times}1cm^2$ to $3.5{\times}3.5cm^2$, and special circular cone designed for the purpose of minimized the risk to normal tissue and those size are $0.7{\~}3.6cm{\phi}$.