• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.5
• /
• pp.326-331
• /
• 2012

Purpose: Length measurement from maxillary anterior teeth root tip to nasal floor is incorrect in panoramic radiography. Comparison of cone beam computed tomography (CBCT) and panoramic radiography should be helpful in determining the vertical length. Methods: Sixty nine patients were taken CBCT and panoramic radiography of the maxillary anterior. First measurement is length of parallel lines from the central incisor and lateral incisor root tip to nasal floor on CBCT. Second measurement is length of perpendicular lines from the central incisor and lateral incisor root tip to nasal floor on CBCT. Third measurement is length from the central incisor and lateral incisor root tip to nasal floor on panoramic radiographys. Results: In the first measurement of the maxillary central incisors, an average of $11.36{\pm}2.49$ mm in males and $10.49{\pm}2.17$ mm in females. In the second measurement of the maxillary central incisors, $10.41{\pm}2.42$ mm in males and $9.18{\pm}2.08$ mm in females. In the third measurement of the maxillary central incisors, $10.71{\pm}2.20$ mm in males and $9.27{\pm}2.10$ mm in females. In the first measurement of the maxillary lateral incisors, an average of $13.40{\pm}2.04$ mm in males and $11.96{\pm}2.20$ mm in females. In the second measurement of the maxillary lateral incisors, $11.25{\pm}1.82$ mm in males and $10.06{\pm}1.68$ mm in females. In the third measurement of the maxillary lateral incisors, $11.47{\pm}2.01$ mm in males and $10.13{\pm}1.70$ mm in females. Conclusion: The vertical length from root tip to nasal floor was longer in male than female (P>0.05). First measurement was longer than third measurement (P<0.05). This is the actual placement of the implant site measured on the vertical length than the length of the panorama means that there are a few more free. The first measurement was longer than 114% over the third measurement.

• Plant Resources
• /
• v.6 no.3
• /
• pp.233-241
• /
• 2003

The shoot tip and young leaf of Rhodiola sachalinensis were cultured to invest the plant growth regulator condition for callus induction, shoot and root regeneration. When the shoot tip was sterilized in 2.0% of NaOCl for 20min., the contamination rate was the lowest. And the survival rate of the culture material was good in carbenicillin 500mg/L treatment group. Callus was obtained from shoot tip and young leaf segments. NAA 0.1-1.0mg/L and 2,4-D 0.1-0.5mg/L alone treatment were shown to have a good response on callus induction from shoot tip culture. In the case of young leaf culture, NAA and 2,4-D 0.1-0.5mg/L alone treatment were good in callus induction. In culturing shoot tip NAA 0.5mg/L and BA 0.5mg/L, NAA1.0mg/L and BA 0.lmg/L combination treatment was good in shoot regeneration. The regenerated shoots were rooted on MS medium supplemented with NAA and BA combination treatment. Especially, NAA 1.0mg/L and BA 0.1mg/L combination treatment was effective for root regeneration.

• Journal of Plant Biology
• /
• v.37 no.1
• /
• pp.69-76
• /
• 1994

The present work was conducted to examine the effect of tobacco smoke solution, and its components such as nicotine and catechol treated separately on the root tip cells of Allium cepa L The mitotic abnormalities in root tip cells treated with those three components were increased linearly, while the mitotic index was decreased following concentrations of the components. Chromosomal abnormalities showed 29.7%, 15.8% and 13.0% in the treatment of tobacco smoke solution, nicotine, and catechol, respectively. The abonormalities were included polyploid, c-mitosis, stickness at metaphase, laggard, bridge formation at anaphase or telophase, and micronucleus, abnormal nucleus at interphase, after the treatment of the components for 24 hours. hours.

• Restorative Dentistry and Endodontics
• /
• v.37 no.2
• /
• pp.68-73
• /
• 2012

Objectives: The purpose of this study was to assess the accuracy of Root ZX (J. Morita Corp.) according to the location of major foramen and open apex. Materials and Methods: 81 mandibular premolars with mature apices were selected. After access preparation, 27 teeth were instrumented to simulate open apices. 54 teeth were classified according to location of major foramen under surgical microscope (${\times}16$). The file was fixed at the location of apical constriction by Root ZX using glass ionomer cement .The apical 4 mm of the apex was exposed and photo was taken and the distance from file tip to the major foramen was measured by calibrating metal ruler on graph paper. The results were statistically analyzed using ANOVA and Scheffe test at p < 0.05 level. Results: Mean distance from file tip to major foramen was 0.308 mm in Tip foramen group (I), 0.519 mm in Lateral foramen group (II) and 0.932 mm in open apex group (III). Root ZX located apical constriction accurately within ${\pm}0.5mm$ in group I of 85.71%, in group II of 59.09%, and in group III of 33.33%. There was a statistically significant difference between group I and III (p < 0.05). Conclusion: Root ZX located apical constriction accurately regardless of location of major foramen. However, Root ZX couldn't find it in open apex. Clinicians have to use a combination of methods to determine an appropriate working length at open apex. It may be more successful than relying on just electronic apex locator.

• Structural Engineering and Mechanics
• /
• v.2 no.2
• /
• pp.141-156
• /
• 1994

In this paper, the effect of material elasticity was evaluated through a simple model as proposed by Wang and Yu (1991), for yield mechanisms of a cantilever beam under tip pulse loading. The beam was assumed rigid-perfectly plastic but instead of the usual fully clamped constraints at its root, an elastic-perfectly plastic rotational spring was introduced there so the system had a certain capacity to absorb elastic energy. Compared with a rigid-perfectly plastic beam without a spring root, the present beam-spring model showed differences in the initial plastic hinge position and the minimum magnitude of the dynamic force needed to produce a plastic failure. It was also shown that various failure responses may happen while the hinge travels along the beam segment towards the root, rather than a unique response mode as in a rigid perfectly plastic analysis.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.110-116
• /
• 2013

This study was carried out to establish the simple mass-screening methods for resistant tomato to Fusarium wilt caused by Fusarium oxysporum f. sp. lycopersici (FOL). Root dip inoculation method has been used in many studies on the resistance of tomato to disease. On the other hand, in mass-screening for resistant tomato to Fusarium wilt, the inoculation method is time-consuming and laborious procedure. Disease development of two FOL isolates on two cultivars of tomato according to inoculation method including root dip, tip and scalpel methods were investigated. In compatible interaction, tomato seedlings of each cultivar inoculated by tip method showed the lower and more variable disease severities than by root dip method. Whereas the seedlings by scalpel method represented clear resistant and susceptible responses to Fusarium wilt as root dip method. The resistance degree of each cultivar inoculated with FOL isolates by scalpel method was hardly affected by the tested incubation temperature and inoculum concentration. On the basis of the results, we suggest scalpel inoculation method as an efficient mass-screening method for resistant of tomato cultivars to Fusarium wilt. Roots of tomato seedlings at two-leaf stage grown in plastic cell tray were injured with scalpel and then spore suspension (more than $1{\times}10^7\;conidia{\cdot}mL^{-1}$) of FOL was poured directly on the roots. The infected plants were cultivated in a growth room at $25-30^{\circ}C$ for 4 weeks with 12-hours light a day.

• Journal of the Korea Furniture Society
• /
• v.12 no.2
• /
• pp.1-10
• /
• 2001

As finger joint method has a high rate of yield and high strength and ease in working, it has been widely used as an end joint method for solid wood and wood based-material. Therefore, we end-joined the material of Pinus densiflora, Quercus variabilis and populus euramericana with polyvinyl acetate adhesive and resorcinol phenol resin adhesive. The effect of difference (0, 0.15, 0.3, 0.45mm) between the dimensions of tip width and root width of the finger (DTRW) on bending strength properties was as follows: 1. In the case of polyvinyl acetate adhesive, DTRW had no effect on bending modulus of elasticity(MOE) and modulus of rupture(MOR) of the three kinds of species, because their bonding layers were destroyed by slippage, not their woody parts. 2. In the case of resorcinol phenol resin adhesive, the material of Quercus variabilis showed an optimal result at 0.15 or 0.3 of DTRW, while the poplar did at 0 of DTRW 3. The differences in efficiency ratio of bending MOR of populus euramericana, Pinus densiflora and Quercus variabilis species according to the kind of adhesive were 13-29%, 23-30% and 45-53%, respectively.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.339-345
• /
• 1998

The purpose of this study was to evaluate the in vitro accuracy of Root ZX(Morita Co., Japan) which is the ratio type electronic apex locator. The 86 extracted human palatal roots of maxillary molar with fully formed apices were used. File lengths with the file tip just visible at the foramen were compared to those measured with Root ZX. For length measuring with Root ZX, saline test model with which the apical 1/3 of each root was submerged into normal saline were designed. The root canal lengths were determined with Root ZX and the radiographs were taken with a file in the canal. The distances from file tips of Root ZX lengths to apecies in radiographs also were measured with Profile projector PJ311(Mitutoyo Co., Japan). The results were as follows : 1. The root canal length determined with electronic apex locator was $0.78{\pm}0.53mm$ shorter than the length with visual measurement. 2. The file tip of Root ZX lengths was located at $0.85{\pm}0.49mm$ away from the apex in radiograph. 3. The accuracy of the Root ZX was 79.1% within 0.5mm of visual working length and 96.5% within 1.0mm.

• Restorative Dentistry and Endodontics
• /
• v.35 no.6
• /
• pp.453-460
• /
• 2010

Objectives: To evaluate the accuracy and consistency of two different apex locators at both the Apex and 0.5 marks. Materials and Methods: Twenty-six root canals was scheduled for extraction for periodontal or prosthodontic reasons. Thirteen canals were measured using Root ZX and the rest by i-ROOT. The root canal length was measured both the at 0.5 mark and the Apex mark. The file was then fixed to the toot, and the distance from the file tip to the major foramen of each canal was measured after removing the root dentin under the microscope so that the major foramen and the file tip were seen. Results: 1. When the Apex mark was used, 100% of both the Root ZX and i-ROOT groups were within 0.5 mm of the major foramen. 2. When 0.5 mark was used, 100% of the Root ZX group and 77% of the i-ROOT group were within 0.5 mm of the major foramen. 3. In terms of standard deviation and quartile value, the Apex mark was more consistent than 0.5 mark in the Root ZX group, and 0.5 mark was more consistent in the i-ROOT group, but there was no statistically significant difference when compared with t-test. 4. The root canal length difference between the Apex mark and 0.5 mark was 0.22 mm and 0.46 mm in the Root ZX and i-ROOT groups, respectively. Conclusions: In this study, the Apex mark was the more consistent mark. Therefore, it is recommended to subtract 0.5 mm, which is the average length between the apex and apical constriction, from the root canal length at the Apex mark to obtain the working length clinically.

• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.3-8
• /
• 1994

This paper has described the analysis of the Stress Intensity Factor behaviour of a short crack Initiated from notch tip. The model for finite element analysis is a double edge notched specimen. The parameters used in this study are crack length and notch root curvature radius.