• Korean Journal of Acupuncture
• /
• v.37 no.3
• /
• pp.203-208
• /
• 2020

Objectives : Since there are complex associations between diseases/symptoms and acupoints, one-to-one correspondence may not be the proper approach. Pattern identification has been being used as a clinical framework to make treatment decisions by extracting and synthesizing clinical data including patients' signs and symptoms. In this article, we propose two different models explaining the relationships between diseases and acupoints based on the branch treatment [Zhibiaofa] and the root treatment [Zhibenfa]. Methods : We explained the relationships between diseases/symptoms and acupoints from the example data from our previous study on traditional acupuncture point selection patterns for pain control. Diseases include low back pain, migraine, irritable bowel syndrome, osteoarthritis, ankle sprain, carpal tunnel syndrome, and dysmenorrhea, and acupoints included LI4, BL23, BL25, SP6, BL60, TE5, and CV4. Results : The relationships between diseases/symptoms and acupoints can be explained directly based on the branch treatment, and also can be explained indirectly through pattern identification based on the root treatment. Pattern identifications included both meridian-based pattern identification based on the spatial information of diseases and visceral organ-based pattern identification based on the characteristics of diseases. Conclusions : In the East Asian traditional medicine, Korean medicine doctors choose the most appropriate acupoints based either on the diseases/symptoms (i.e., branch treatment) or on the results of pattern identifications (i.e., root treatment). It is necessary to understand the two different approaches to choose specific acupoints for the targeted diseases.

• Restorative Dentistry and Endodontics
• /
• v.48 no.3
• /
• pp.31.1-31.11
• /
• 2023

Objectives: This retrospective cohort study examined the incidence of interappointment emergencies during multiple-visit molar root canal treatments conducted by undergraduate students. Treatments performed without the use of intracanal medicament were compared to treatments that incorporated calcium hydroxide as an intracanal medicament. Materials and Methods: Interappointment emergencies, defined as instances of pain or swelling that required the patient to make an unscheduled follow-up visit, were recorded for up to 2 months after the intervention. To avoid the influence of obturation on the observed incidence of emergency visits, only unscheduled visits occurring between the start and end of the root canal treatment were included. Results: Of the 719 patients included in this study, 77 (10.7%) were recorded as experiencing interappointment emergencies. Of these emergencies, 62% occurred within 2 weeks following the most recent intervention. In the group of patients who did not receive intracanal medicament, the incidence of interappointment emergencies was 11.9% (46 of 385 patients). In comparison, this rate was 9.3% (31 of 334 patients) among those who received calcium hydroxide as an intracanal medicament (odds ratio, 1.33; 95% confidence interval, 0.82-2.15; p = 0.249). Conclusions: Interappointment emergencies may arise at any point during root canal treatment, but they most commonly occur within the first 2 weeks following intervention. The omission of intracanal medicament in multiple-visit molar root canal treatments, performed by undergraduate students, did not significantly increase the incidence of these emergencies.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.484-489
• /
• 2003

It is well known that root distribution of rice is a crucial factor for nutrient absorbtion and affect by soil fertility management. However, the findings on root distribution are limited due to laborious and tedious work. The characteristics of root distribution were investigated in long-term fertilizer experiment plots that were established in paddy soil, a fine silty family of typic Hal-paqueps (Pyeongtaeg series) in 1967. fertilizer experiment plots of no fertilizer, compost, NPK and NPK+compost plot have been maintained consistently for the past thirty six year and Npk+silicate plot for the past twenty two years. In NPK plot, 150kg N (urea), 100kg -$\textrm{P}_2\textrm{O}_5$ (fused phosphate) and 100kg $\textrm{K}_2\textrm{O}$(potassium chloride) per hectare have been applied. For NPK+silicate plot, 500kg $\textrm{Si}\textrm{O}_2$ (silicate) was applied in addition to fertilizer in NPK plot. For the compost plot, 10,000kg rice straw compost per hectare were applied. Root samples were taken from the positions of hill-center (below hill) and mid-point of four adjacent rice hills at heading stage by cylinder monolith (CM) method. The soil cores were sampled 20cm depth from the soil surface and partitioned four into layers at an interval of 5cm. The soil particles surrounding roots were washed out with tap water, Length and weight of the roots in each soil layer were measured and root length density (RLD), root weight density (RWD), specific root length(SRL) and rooting depth index (RDI) were calculated. Total root length was measured by intersection method. Plant height, tiller and shoot dry weight were the highest in NPK+compost plot. But RLD of hill-center soil cores was the highest in no-fertilizer plots. In the soil cores from mid-point position of four adjacent hills, RLD at 15-20cm soil depth was higher in compost plot than NPK plot. RLD in compost plots showed even distribution compared to those in chemical- fertilizer plots. RWD was the highest in the NPK+compost plot. SRL was the lowest in the NPK+silicate plot. RDI was the highest in the compost plot. Also, in this experiment it was found that the distribution of roots was closely related to the physical properties of the soil as affected by fertilization management.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.263-273
• /
• 1993

The purpose of this study was to analyse the center of resistance of the maxillary first molar using the 3-dimension finite element method. An extracted maxillary first molar of normal shape and average root length was selected and sectioned every 1.5mm parallel to the cementoenamel junction. Each section was traced and digitized to construct 3-D finite element model of the maxillary first molar. After a certain magnitude of counterbalancing moment(M) was applied to the tooth, a varying single force(F) of distomesial direction was applied to a certain point of th tooth until the tooth was translated. The force producing translation(Ft) was substituted to the equation ${\Delta}d=M/Ft$ to calculate the center of resistance of the maxillary first molar. And reducing the alveolar bone level 1.68mm, and 3.36mm below to the cementoenamel junction, the tooth movement was analysed to see the effect of reducing the alveolar bone level to the location of the center of resistance. The results were as follows ; 1. The center of resistance of the maxillary first molar was 3.72mm apical, 1.10mm buccal, and 0.71mm mesial to the geometric center of the horizontally sectioned surface at the cementoenamel junction. This point was 0.36mm apical, 1.20mm buccal, and 0.71mm mesial to the trifurcation point, indicating that it was not on the tooth root. 2. As the alveolar bone level was reduced, the center of resistance of the maxillary first molar was moved to the apical direction.

• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.628-634
• /
• 1996

The purpose of this study was to investigate the effect of moisture on apical sealing properties of root canal. Fifty five single rooted human teeth were selected from maxillary and mandibular teeth. After removing crown portion at the cemento-enamel junction, all teeth were routinely prepared with step-back method. And then, the canals were dried with paper point and the teeth were randomly divided into 3 groups of 15 teeth each, and remaining 10 teeth were used as positive and negative control teeth : Group 1 were irrigated with 1ml of 95% alcohol and dried with air and paper point. Group 2 and 3 were intentionally contaminated with 0.05ml of 3.5% NaOCl or saliva, respectively. All the teeth were obturated with sealapex and gutta percha cone by lateral condensation technique, and covered with two coat of nail varnish after 48 hours of obturation. The teeth were immersed in india ink for 1 week and cleaned with methyl salicylate and then the degree of dye penetration were measured with stereomicroscope. The data were analyzed statistically by one-way ANOVA. The results were as follows : 1. All experimental groups showed varying degrees of dye penetration, and the mean degree of dye penetration was 0.1mm to 0.7mm. 2. Saliva contamination group(group 3) showed the highest amount of dye penetration, followed by NaOCl contamination group, then alcohol dried group, but there was no significant difference among three experimental groups. * This results suggest that there was no significant differences of apical leakage after canal obturation between alcohol dried canal and moisture present canals and the use of alcohol instead of paper point is unnecessary to dry the canals prior to canal filling. But other factors such as bacterial contamination and sealer discoloration by moisture must be considered in application of this results to clinical practice.

• Korean Journal Plant Pathology
• /
• v.3 no.3
• /
• pp.198-202
• /
• 1987

Toxic metabolites ('Toxins'), produced by Helminthosporium sativum causing leaf blotch in barley and root rot in barley and wheat were partially purified through C-18 column. The partially purified toxins appeared heat unstable and lipophilic. The responses of toxins to wheat and barley root corresponded with those to lettuce growth with the different concentrations. The determination of the concentration of toxins produced was developed using the dilution end-points. The equation [Y = a log X + b) was obtained from the semi-log­graphy with the linear analysis. The values 'a' and 'b' were discussed with the responses of several plants on the toxin produced by H. sativum.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.166-179
• /
• 1999

Apical sealing is essential for the success of surgical endodontic treatment. Root-end cavity is apt to be contaminated with moisture or blood, and is not always easy to be dried completely. The purpose of this study was to evaluate the influence of dry methods of retrocavity on the apical seal in endodontic surgery. Apical seal was investigated through the evaluation of apical leakage and adaptation of filling material over the cavity wall. To investigate the influence of various dry methods on the apical leakage, 125 palatal roots of extracted human maxillary molar teeth were used. The clinical crown of each tooth was removed at 10 mm from the root apex using a slow-speed diamond saw and water spray. Root canals of the all the specimens were prepared with step-back technique and filled with gutta-percha by lateral condensation method. After removing of the coronal 2 mm of filling material, the access cavities were closed with Cavit$^{(R)}$. Two coats of nail polish were applied to the external surface of each root. Apical three millimeters of each root was resected perpendicular to the long axis of the root with a diamond saw. Class I retrograde cavities were prepared with ultrasonic instruments. Retrocavities were washed with physiologic saline solution and dried with various methods or contaminated with human blood. Retrocavities were filled either with IRM, Super EBA or composite resin. All the specimens were immersed in 2% methylene blue solution for 7 days in an incubator at $37^{\circ}C$. The teeth were dissolved in 14 ml of 35% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data were analysed statistically using one-way ANOVA and Duncan's Multiple Range Test. To evaluate the influence of various dry methods on the adaptation of filling material over the cavity wall, 12 palatal roots of extracted human maxillary molar teeth were used. After all the roots were prepared and filled, and retrograde cavities were made and filled as above, roots were sectioned longitudinally. Filling-dentin interface of cut surfaces were examined by scanning electron microscope. The results were as follows: 1. Cavities dried with paper point or compressed air showed less leakage than those dried with cotton pellet in Super EBA filled cavity (p<0.05). However, there was no difference between paper point- and compressed air-dried cavities. 2. When cavities were dried with compressed air, dentin-bonded composite resin-filled cavities showed less apical leakage than IRM- or Super EBA-filled ones (p<0.05). 3. Regardless of the filling material, cavities contaminated with human blood showed significantly more apical leakage than those dried with compressed air after saline irrigation (p<0.05). 4. Outer half of the cavity showed larger dentin-filling interface gap than inner half did when cavities were filled with IRM or Super EBA. 5. In all the filling material groups, cavities contaminated with blood or dried with cotton pellets only showed larger defects at the base of the cavity than ones dried with paper points or compressed air.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.715-718
• /
• 2005

Mobile devices is getting to include more functions according to the demand of digital convergence. Applications based on 3D graphic calculation such as 3D games and navigation are one of the functions. 3D graphic calculation requires heavy calculation. Therefore, we need dedicated 3D graphic hardware unit with high performance. 3D graphic calculation needs a lot of complicated floating-point arithmetic operation. However, most of current mobile 3D graphics processors do not have efficient architecture for mobile devices because they are based on those for conventional computer systems. In this paper, we propose arithmetic units for special functions of lighting operation of 3D graphics. Transcendental arithmetic units are designed using approximation of logarithm function. Special function units for lighting operation such as reciprocal, square root, reciprocal of square root, and power can be obtained. The proposed arithmetic unit has lower error rate and smaller silicon area than conventional arithmetic architecture.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.232-240
• /
• 2012

This study proposed efficient method of singular value for inverse problem, linear approximation of contact position and loading in single and double meshing of transmission contact element, using 2-dimension model considered near the tooth by root stress. Determination of root stress is carried out for the gear tooth by finite element method and boundary element method. Boundary element discretization near contact point is carefully performed to keep high computational accuracy. The predicted results of boundary element method are good accordance with that of finite element method.

• International Journal of Reliability and Applications
• /
• v.6 no.1
• /
• pp.41-51
• /
• 2005

The Bayes estimators of the parameters included in the complementary Weibull reliability model are obtained. In the process of deriving Bayes estimators, the scale and shape parameters of the complementary Weibull distribution are considered to be independent random variables having prior exponential distributions. The maximum likelihood estimators of the desired parameters are derived. Further, the least square estimators are obtained in closed forms. Simulation study is made using Monte Carlo method to make a comparison among the obtained estimators. The comparison is made by computing the root mean squared errors associated to each point estimation. Based on the numerical study, the Bayes procedure seems better than the maximum likelihood and least square procedures in the sense of having smaller root mean squared errors.