• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.4
• /
• pp.259-266
• /
• 2006

In this study, the 2-way condensation system was designed applying air-to-air heat pump to dry a marine product such as squid in the winter. And to be made the drying apparatuses by this system, there are two kinds of type, A type, was set a compressor outside of the drying apparatus, B type, was set a compressor in the drying room. And then the variations of temperature in drying room were measured to compare the heating performance of the drying apparatuses between A type and B type at $-6.5^{\circ}C$, outdoor temperature. The temperature of the drying room for B type was increased to $36^{\circ}C$ but the temperature of the drying room for A type was not increased to $36^{\circ}C$, to be increased to $20^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.139-146
• /
• 2017

This study was conducted to develop a new drying technology in order to quickly and massively dry bamboo tubes without crack and check. The bamboo tubes with the diameter of 45 mm - 68 mm had been impregnated in the solution of PEG-1000, and then were dried under room temperature and high temperature, respectively. The cracks occurred on all control specimens while no cracks were found on PEG treated specimens during drying at room temperature due to effect of PEG restraining the circumferential shrinkage of bamboo tube. But the drying period of this method was too long (200 days) compared to 10 hours of kiln drying. During fast high temperature drying, cracks occurred on all control specimens, but no cracks were found on PEG treated specimens, which could be accounted for more solidified PEG due to higher drying temperature and faster drying rate, and the tension set formed on the surface of bamboo tube in the early stage of drying owning to high drying temperature and low relative humidity. Thus, it is advised that PEG treated bamboo tube should be fast dried at high temperature in order to not only prevent crack or check in short drying period but also increase the dimensional stability of the products made of bamboo tubes.

• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.23-32
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional indigo dyeing. Leaf powder colorants were prepared by hot air($50^{\circ}C$) and room temperanrre($25^{\circ}C$) drying methods from fresh leaves. The presence of indigo in the leaf powder colorants was confirmed by UV/Visible absorption spectra. All the powder colorants showed broad absorption at 602 nm as same as synthetic indigo. Dyeing was done by reduction method with sodium hydrosulfite and sodium hydroxide. Leaf powder colorants produced blue color on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants prepared at room temperature drying were more stable for long term storage than that prepared by hot air drying. Thus, the powder colorants prepared by room temperature drying was reduced and dyed in one-step process without sodium hydroxide in the dyebath for further investigate dyeing properties. K/S value of the fabric dyed without sodium hydroxide was much higher than one dyed with sodium hydroxide. Regardless of the addition of sodium hydroxide, rubbing fastness was fairly good showing above 4 rating. Fastness to dry cleaning and light of the fabrics dyed without sodium hydroxide were mote higher than that dyed in alkaline condition.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.66-71
• /
• 1994

To increase drying rate and reduce drying degradation, pretreatments such as prefreezing and presteaming have been widely used in wood industries. Presteaming lumbers prior to kiln drying is known positively to improve its permeability, to increase diffusion coefficient and to reduce discoloration, but negatively to increase collapse. Prefreezing lumbers prior to kiln drying is also known to reduce significantly its drying defects and its shrinkages. Thus it is no doubt that the pretreated lumbers shrink diversely from the untreated. In this study the shrinkage behaviors of the pretreated specimens are investigated by drying two tropical hardwoods (Apitong and Taun) in three different dying conditions: high temperature and slow drying rate (drying in a closed cylinder), high temperature and rapid drying rate (drying in an oven) and low temperature and slow drying rate(drying at room temperature). The prefrozen specimens show the least volumetric shrinkages in most drying conditions. The specimens dried in cylinders shrink most among all drying conditions. In general the pretreated specimens reached the 30 % moisture content faster than the untreated by about 30 %.

• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.428-432
• /
• 2022

In this study, we describe the improvement of the resolution of a paper-based sensor by fabricating a high-concentration ninhydrin part using a low-temperature drying method to detect proline with high resolution. In the conventional paper-based sensor for detecting proline, the ninhydrin part is fabricated at room temperature, and in this process, the ninhydrin solution spreads around the ninhydrin part. Therefore, the concentration of the ninhydrin part becomes lower than that of the applied solution, lowering the resolution of the sensor. The proposed paper-based sensor better improved the sensitivity of the sensor compared to the existing sensor by fabricating a high-concentration ninhydrin part through drying the ninhydrin solution using a low-temperature drying method. Owing to the experiment, the intensity of the green color of the paper-based sensor with the integrated ninhydrin part fabricated at 10 ℃ is approximately 20% lower than the paper-based sensor with an integrated ninhydrin part fabricated at room temperature, indicating better sensor resolution. Therefore, the paper-based sensor with an integrated ninhydrin part fabricated at a high concentration could be useful for diagnosing drought.

• The Korean Journal of Pesticide Science
• /
• v.12 no.4
• /
• pp.368-374
• /
• 2008

Dry formulation is a limiting step for successful development of microbial bio-pesticides with the antagonistic Gram-negative bacteria because their survival rates are too low during drying and storage. The high concentration of sodium chloride (NaCl) in culture medium that induces osmolyte in bacterial cells is known to increase of survival rate during drying in many Gram-negative bacteria. Effect of NaCl on survival of antagonistic non-pathogenic Erwinia carotovora subsp. carotovora 9-3 (Ecc 9-3) during drying and storage was studied. Growth rate of Ecc 9-3 was not much different up to 0.5 M NaCl in NB while it was lower significantly with 0.7 M NaCl. Survival rates were twice and 3 times higher with 0.5 M NaCl than with no additional NaCl during drying at room temperature and freeze-drying, respectively. Survival rate was also higher with high NaCl in culture medium during storage after drying. It was not much different on storage at $4^{\circ}C$ both of drying at room temperature and freeze-drying. However, the survival rate was higher on storage at $27^{\circ}C$ and $37^{\circ}C$ with high NaCl concentration. Among the additives tested, lactose affects most to survival rate both of drying at room temperature and freeze-drying, and dextrin influenced significantly to survival rate of drying at room temperature.

• Korean Journal of Plant Resources
• /
• v.35 no.4
• /
• pp.455-463
• /
• 2022

The effects of freeze-drying (FD), room-temperature drying (RD), and room-temperature drying after roasting (RDAR) on the volatile organic compounds (VOCs), sugar content, flavonoids, and antioxidant activity of Hallabong peel tea were tested. This experiment was conducted to collect a basic information for developing of peel tea. FD samples showed lower total soluble solids and VOCs than other drying treatments. RDAR samples showed a significant difference in VOCs and visual color of FD samples. The reduced VOCs in FD samples was caused by freeze drying treatment; identical VOCs composition of hallabong peel was detected from condensed ice of freeze-drying machine. Metabolomics analysis showed no difference among three drying treatments. In addition, antioxidant activity and total phenolic compounds were not significantly different from three different drying treatments. Thus, RD or RDAR is a suitable drying method for hallabong peel tea rather than FD method in terms of VOCs and economical reasons.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.9
• /
• pp.1452-1460
• /
• 2013

The purpose of this study was to investigate secondary drying effects on garlic quality, and to define the optimal secondary drying conditions for garlic preservation. The secondary drying tests used garlic that was naturally dried once and stored at low temperature. After secondary drying, the garlic was stored in a warehouse at room temperature. Tests were performed at different low-temperature storage periods (60, 105, 150, 195, and 240 days), secondary drying temperatures (35 and $40^{\circ}C$), drying times (1, 2, 3 days), and room temperature storage periods (15, 30, and 45 days). The results were compared with a non-secondary drying condition control. In general, the $40^{\circ}C$-2 days dry conditions showed the lowest weight-loss rate (5%) and rotting rate during room temperature storage. The sprouting rate increased by 20% during the initial 15 day-room temperature storage, along with a small increase after 30 days of room temperature storage. Increases in drying temperature and the period of secondary drying conditions caused a decrease in firmness. In addition, the sprouting rate was 10% higher, and rotting rate 5~10% higher, for the non-drying condition, compared to drying conditions. Based on our results, the $40^{\circ}C$-2 days drying condition is the optimal secondary drying condition for garlic storage.

• Journal of Biosystems Engineering
• /
• v.19 no.2
• /
• pp.112-123
• /
• 1994

At present, no appropriate drying conditions can be found for the heated-air drying of mushroom in Korea. Usually, mushroom is being dried at the temperature range of 40 to $50^{\circ}C$ until the moisture content reaches 10~13% (wb). However, drying characteristics of the mushroom should be investigated for quality improvement and efficient drying operation of the mushroom. The results of this study may be summarized as follows ; 1. The effect of air temperature on the rate of drying was greater than that of relative humidity for drying of mushroom, and the rate of drying was increased with increase in the air temperature. 2. Drying rate for Shiitake mushroom showed falling-rate period of drying without constant-rate period of drying. Drying rate for Oyster mushroom showed a short constant-rate period at the initial stage of drying process, and followed by falling-rate period of drying. 3. Exponential and App.-Diffusion models were found to describe well the drying process of Shiitake mushroom. Exponential and Thompson models for Oyster mushroom in which Thompson model was the most suitable for Oyster mushroom. 4. The equilibrium moisture content of the mushroom decreased with decrease in the air temperature and increase in the relative humidity. In room condition($20^{\circ}C$, 54% RH), the calculated values of the equilibrium moisture content showed 11.17% for Shiitake mushroom and 13.19% for Oyster mushroom, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.459-464
• /
• 2002

This experiment was conducted to know the changes of bioactive component content in four-year-old peony (Paeonia lactiflora Pall.) root with various drying methods such as room temperature drying, $50^{\circ}C$ heat-air drying, room temperature drying after $80^{\circ}C$ boiling water treatment and freeze drying, and to establish the optimum drying method for high quality production of Paeoniae Radix. For this purpose, the contents of paeoniflorin, albiflorin and five phenolic compounds (gallic acid, benzoic acid, (+)-catechin, (-)-epicatechin and (+)-taxifolin 3-O-$\beta$-D-glucopyranoside) in peony root with different drying methods were analyzed by RP-HPLC. The contents of paeoniflorin, albiflorin and (+)-taxifolin 3-O-$\beta$-D-glucopyranoside at room temperature drying were higher than in the other drying methods and that of gallic acid at 8$0^{\circ}C$ boiling water treatment was the highest among that of all drying methods. In the case of freeze drying, the contents of (+)-catechin, benzoic acid and (-)-epicatechin were the highest among those of all drying methods. As increase of drying and treatment temperature, the contents of paeoniflorin, albiflorin, (+)-taxifolin 3-O-$\beta$-D-glucopyrano-side, (+)-catechin and benzoic acid were decreased.