• Korean Journal of Environment and Ecology
• /
• v.30 no.6
• /
• pp.939-961
• /
• 2016

For effective conservation of endangered wild plants, it is necessary to understand their interactions with environmental factors in each habitat together with life traits of target species. First, the characteristics of their distribution were investigated followed by their monitoring for 4 years focusing on the habitats in the lagoon. Also, their life traits were compared including production of hibernacles, fruits, and seeds by the soil fertilization and light intensities. Next, the information on the species was secured by germination experiment using the generated seeds from the cultivation experiment. The habitat of Glaux maritima var. obtusifolia Fernald in Korea was located in the rear edge of the worldwide distribution and its four habitats were isolated and distributed far away each other. Two of them were located in small salt-marsh and fine sand estuaries formed in the rocky area of the seashore, and the other two were inhabited with the sandy soil in the lagoon which was connected by river-mouth to the sea. Glaux maritima var. obtusifolia Fernald tends to be distributed in the sites where the establishment and growth of the competitor were inhibited by salinity, periodic flooding, and lower layer of the soil to extend a roots. It maintained its population by recruitments of hibernacles and seedling. The production of hibernacle was assumed to be affected by the particle consist of the sand together with organic matters in the soil. Seedling recruitment was observed only in the salt-marsh area located in the rear sites of sand ridge where was the shore of the lagoon. Glaux maritima var. obtusifolia Fernald was observed to have different threatening factors by each population. Its population in Pohang seemed the sedimentation of fine sand which affected the recruitment of hibernacles had been eroded due to the construction of the coastal road. The population in Ulsan appeared rapid expansion of competitor and reduction of its distribution area due to the interruption of eluted water supplied to the habitat. On the other hand, the habitat in the lagoon maintained the population relatively stable. Especially, the population in Songji-ho was determined to be the most stable one. To sustain the population of Glaux maritima var. obtusifolia Fernald distributed in the lagoon, it is suggested that the wide ranged scale of conservational activities is necessary to maintain the mechanisms including the entrance of seawater which belongs to the lagoon, and periodic flooding.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.55-72
• /
• 1995

The purpose of this study is to evaluate the effects of mechanical and thermal fatigue on the shear bond strength(SBS) in orthodontic brackets bonded to human premolars with chemically cured adhesive(Mono-$Lok^2$, Rocky Mountain Orthodontics). Two types of metal brackets (Ormesh, Microloc) and three types of ceramic brackets (Fascination, Starfire, Transcend 2000) were used in this study. The $10^6$ loadcycles of $|7.4{\times}10{^2}sin2{\pi}ft|g{\cdot}cm$ and the 1,000 thermocycles of 15 second dwell time each in $5^{\circ}C\;and\;55^{\circ}C$ baths were acturated as mechanical and thermal fatigue stress, and SBS were measured after each fatigue test. The fracture sites were examined by stereoscope and scanning electron microscope. The results obtained were summarized as follows, 1. In static shear bond test, Fascination brackets showed the maximum SBS($20.78\pm3.45$ MPa) and Microloc brackets showed the minimum SBS($14.88\pm3.10$ MPa). Fascination and Starfire brackets showed significantly greater SBS than Microloc brackets(P<0.05). 2. In mechanical fatigue test, Fascination brackets showed the maximum SBS ($20.19\pm3.45$ MPa) and Starfire brackets showed the minimum SBS($9.10\pm8.33$ MPa). The SBS or Transcend 2000 brackets(P<0.01) and Starfire brackets(P<0.05) significantly decreased after $10^6$ loadcycles. 3. In thermocycling test, Ormesh brackets showed the maximum SBS ($19.36\pm2.76$ MPa) and Starfire brackets showed the minimum SBS($11.94\pm6.86$ MPa). The SBS of Transcend 2000(P<0.01), Microloc and Starfire brackets(P<0.05) significantly decreased after $10^3$ thermocycles. 4. Failure sites of thermocycling groups were similar to those of static groups but after mechanical fatigue test, Ormesh and Transcend 2000 brackets failed at the bracket/resin interface and Microloc brackets failed within adhesive. Facination brackets failed at the enamel/resin interface irrespective of experimental condition.

• Korean Journal of Ichthyology
• /
• v.1 no.1_2
• /
• pp.9-18
• /
• 1989

Blenniid fish, Istiblennius stellifer(jordan et Snyder) is distributed in the coastal waters of south-eastern Korea and Japan. Matured adults of blenniid fish were collected from the rocky shore of Namchun-dong, Nam-gu, Pusan, Korea on May 15, 1988. The fertilized eggs were incubated and the larvae were reared in laboratory. The eggs of this species were demersal and adhesive, and their diameters varied from 0.84 to 0.88 mm(mean 0.86 mm, n=30). They have a number of small oil globules. The water temperature throughout incubation ranged from 18.5 to $23.3^{\circ}C$ and salinity was maintained at $28.2-29.5\;^{\circ}/_{\circ\circ}$. The hatching took place in 130 hours after fertilization. The newly hatched larvae were 2.70 mm in total length with 11 (abdominal)+22~25 (caudal)=33-36 myomeres. The larvae absorbed the yolk material and oil globule completely in 10 days after hatching and became postlarvae. Total lengths of the larvae reached 4.65 and 5.75 mm in 10 and 13 days after the hatching, respectively.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.69-88
• /
• 2005

Distribution of benthic macrofauna was surveyed in the subtidal area and on the sand flat of Sindu-ri coast during July 2002. A total of 134 species, 3,511 individuals and 388g biomass of macrobenthos were sampled inclusively from the study sites. 109 species with a mean density of $1,298ind./m^2$ and biomass of $69.4g/m^2$ were collected from 10 stations established in the subtidal area. Polychaetes were represented as a dominant faunal group of the subtidal area in both species richness and density with values of 54 species and $813ind./m^2$. Cluster analysis based on the faunal composition showed that the subtidal area could be divided into four stational groups according to sedimentary characteristics: Cirrophorus armatus - Lumbrineris longifolia association on the mud sediment with pebbles near aqua-farms; Aonides oxycephala association on the rocky bed; Scoloplos armiger - Grandifoxus cuspis association on the sand-dominated sediment along the lowest low water; a association with higher evenness on the sand-dominated sediment in the depth. Although having characteristics of high value in species richness, density and species diversity, the macrobenthic association around the farming area was dominated by the opportunistic species such as Lumbrineris longifolia and Tharyx sp. Natural community represented by S. armiger and G. cuspis was developed in most sand-dominated areas. 50 species were sampled with a mean density of $2,443ind./m^2$ and biomass of $381.3g/m^2$ from eight+ stations along two transects on Sindu-ri sand flat. Mollusks were represented as a dominant faunal group of the sand flat in species richness, density and biomass with values of 20 species, $1,345ind./m^2$ and $350.4g/m^2$, respectively. Umbonium thomasi, Veneridae sp., Mandibulophoxus mai, Armandia lanceolata, Eohaustorius spinigerus, Urothoe convexa were dominant species and these species accounted for over 83% of total individuals. There were three distinct zones of macrobenthos on Sindu-ri sand flat according to the extent of exposure time. The upper zone was dominated by Scopimera globosa, the middle zone was characterized by M. mai, and the lower zone was dominated by E. spinigerus. Sindu-ri coastal area was considered as a healthy habitat for macrobenthos, except for around the farming area. It was considered that Sindu-ri coastal area including the sand flat connected to the sand dune of natural monument was a valuable habitat as a protected site in having no pollution source and no artificial structure.

• Korean Journal of Environment and Ecology
• /
• v.26 no.2
• /
• pp.219-232
• /
• 2012

The purpose of this study was to find characteristics of $Pinus$ $densiflora$ forests in previous records and cultural landscape regions and to establish a management method for recovery of $P.$ $densiflora$ landscape. A total of 16 landscape paintings were analyzed to study $P.$ $densiflora$ forests in Inwangsan(Mt.) shown in figure data. As a result of analyzing figure data, $P.$ $densiflora$ $forests$ were found to be distributed mainly in the ridge line of east slope side of Inwangsan(Mt.) from landscape paintings of Jung Seon, Jang Si Heung and Gang Hee Un. In order to analyze the landscape of $P.$ $densiflora$ forests shown in photograph data on Inwangsan(Mt.), photographs of Inwangsan(Mt.) since late 1800s were searched and a total of 24 photographs were used for analysis. As a result of photographic analysis, $P.$ $densiflora$ forests were found to be distributed mainly in the low area and ridge line of western slope side of Inwangsan(Mt.). As a result of analyzing the distribution status of 10 cultural heritages of Inwangsan(Mt.), cultural heritages in the mountain were mainly established with rocks and $P.$ $densiflora$ forests as the background and are establishing their landscape not only as a form of cultural heritage but also including the natural landscape in the background. A method of restoring cultural landscape of P. densiflora forests was necessary. As a result of analyzing 26 rock beds of Inwangsan(Mt.), most of $P.$ $densiflora$ forests were distributed nearby rock beds since the past. Among such regions, restoration and management of introduced species in the accumulated soil regions to $P.$ $densiflora$ forests were deemed necessary. As a result of analyzing current vegetation of $P.$ $densiflora$ forest areas of the past, 51.87% of areas maintained $P.$ $densiflora$ forest and 25.80% were changed to artificial forests. Most of low areas of the mountain were turned into urban area (10.16%). Management type for restoration of $P.$ $densiflora$ landscape of Inwangsan(Mt.) was classified into preservation, $P.$ $densiflora$ restoration and maintenance. Preservation management was configured as $P.$ $densiflora$ distribution and rocky area distribution. The targets of $P.$ $densiflora$ restoration were indigenous broad-leaf trees, vegetation areas with introduced species and damaged regions within the mountain. The targets of maintenance were urban area in the low area of Inwangsan(Mt.) and military base at the top of the mountain.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.183-196
• /
• 2017

Objective: The purpose of this research was to assess the agreement between job physical risk factor analysis by ergonomists using ergonomic methods and physical examinations made by occupational physicians on the presence of musculoskeletal disorders of the upper extremities. Background: Ergonomics is the systematic application of principles concerned with the design of devices and working conditions for enhancing human capabilities and optimizing working and living conditions. Proper ergonomic design is necessary to prevent injuries and physical and emotional stress. The major types of ergonomic injuries and incidents are cumulative trauma disorders (CTDs), acute strains, sprains, and system failures. Minimization of use of excessive force and awkward postures can help to prevent such injuries Method: Initial data were collected as part of a larger study by the University of Utah Ergonomics and Safety program field data collection teams and medical data collection teams from the Rocky Mountain Center for Occupational and Environmental Health (RMCOEH). Subjects included 173 male and female workers, 83 at Beehive Clothing (a clothing plant), 74 at Autoliv (a plant making air bags for vehicles), and 16 at Deseret Meat (a meat-processing plant). Posture and effort levels were analyzed using a software program developed at the University of Utah (Utah Ergonomic Analysis Tool). The Ergonomic Epicondylitis Model (EEM) was developed to assess the risk of epicondylitis from observable job physical factors. The model considers five job risk factors: (1) intensity of exertion, (2) forearm rotation, (3) wrist posture, (4) elbow compression, and (5) speed of work. Qualitative ratings of these physical factors were determined during video analysis. Personal variables were also investigated to study their relationship with epicondylitis. Logistic regression models were used to determine the association between risk factors and symptoms of epicondyle pain. Results: Results of this study indicate that gender, smoking status, and BMI do have an effect on the risk of epicondylitis but there is not a statistically significant relationship between EEM and epicondylitis. Conclusion: This research studied the relationship between an Ergonomic Epicondylitis Model (EEM) and the occurrence of epicondylitis. The model was not predictive for epicondylitis. However, it is clear that epicondylitis was associated with some individual risk factors such as smoking status, gender, and BMI. Based on the results, future research may discover risk factors that seem to increase the risk of epicondylitis. Application: Although this research used a combination of questionnaire, ergonomic job analysis, and medical job analysis to specifically verify risk factors related to epicondylitis, there are limitations. This research did not have a very large sample size because only 173 subjects were available for this study. Also, it was conducted in only 3 facilities, a plant making air bags for vehicles, a meat-processing plant, and a clothing plant in Utah. If working conditions in other kinds of facilities are considered, results may improve. Therefore, future research should perform analysis with additional subjects in different kinds of facilities. Repetition and duration of a task were not considered as risk factors in this research. These two factors could be associated with epicondylitis so it could be important to include these factors in future research. Psychosocial data and workplace conditions (e.g., low temperature) were also noted during data collection, and could be used to further study the prevalence of epicondylitis. Univariate analysis methods could be used for each variable of EEM. This research was performed using multivariate analysis. Therefore, it was difficult to recognize the different effect of each variable. Basically, the difference between univariate and multivariate analysis is that univariate analysis deals with one predictor variable at a time, whereas multivariate analysis deals with multiple predictor variables combined in a predetermined manner. The univariate analysis could show how each variable is associated with epicondyle pain. This may allow more appropriate weighting factors to be determined and therefore improve the performance of the EEM.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.45-76
• /
• 2000

The purposes of this study were to investigate and understand the present status of various types of "deserts", such as sand desert, gravel desert, rock desert, earth desert, salt desert, desert, rocky desert, gobi desert, sandy desert, clay desert, etc., and the general countermeasures for the combating "desertification" "desertization", and to develop the technologies on the revegetation and restoration for the combating desertification in China. The methods of this study were mainly composed of field surveys on the several experimental sites and research institutes related to combating desertification in China, and examinations on the various technologies for the combating desertification at the Daxing Experimental Station of Beijing Forestry University. The conclusion from this study may be summarized as follows; 1. Status and tendency of desertification in China : China is one of the countries seriously threatened by desertification. Desertification affected areas in China are mainly distributed in arid, semi-arid and dry sub-humid areas in China, covering the most regions of the Northeast China (eastern region of Inner-Mongolia), the northern part of the North China (middle and western region of Inner-Mongolia, Shaanxi, Ningsha, Gansu) and the western part of the Northwest China (Xinzang, Qinghai, Xizang). The total area affected by desertification in China is approximately 2.622 million $km^2$. It covers 27.3% of the total territory of China. Until recently, it is estimated that the annual spreading ratio of desertification in China is 2,460 $km^2$. Therefore, desertification is mostly serious problems facing to the Chinese people. 2. The causes and environmental effect of desertification : The desertification in China is mainly caused by compound factors, including natural condition and human activities. In China, the desertification is started by the decrease of precipitation, continuous dry and drought, strong wind, wind and water erosion, land degradation and loss of natural vegetation caused by climate variation, and accelerated by the human activities, such as over-cultivating, over-grazing, over-cutting of woods, irrational use of water resources. Because desertification has affected the geographical features, soil nutrients contents, salinity, vegetation coverage and the functions of ecosystem, the environmental deteriorations in the desertification affected areas are very seriously. 3. The fundamental strategies of combating desertification in China are the increase of education and awareness of people through various mass media, the revision of laws to guarantee operation of Desertification Combating Law and to improve many relating laws and regulations, the application of advanced technologies and training of experts, the establishment of discriminative policies, and increasing arrangement of budget-investment, and so on. China, as a signed country in UNCCD, has made efforts for the combating desertification. Korea is also signed country in UNCCD, so we should play an important role in the desertification combating projects of China for the northest asia and global environmental conservation as well as environmental conservation of Korea.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.141-158
• /
• 2004

The dependency of criteria used to terminate compatibility tests on the prehydration and quality of bentonite in geosynthetic clay liners (GCLs) is evaluated based on permeation with chemical solutions containing 5, 10, 20, 50, and 100 mM calcium chloride ($CaCl_2$). The hydraulic conductivity tests are not terminated before chemical equilibrium between the effluent and the influent chemistry has been established, resulting in test durations ranging from < 1 day to > 900 days, with longer test durations associated with lower $CaCl_2$ concentrations. The evaluation includes both physical termination criteria (i.e., volumetric flow ratio and steady hydraulic conductivity based on ASTM D 5084, ${\ge}2$ pore volumes of flow, constant thickness of specimen) and chemical termination criteria requiring equilibrium between influent and effluent chemistry (viz., electrical conductivity, pH, and $Ca^{2+}\;and\;Cl^-$ concentrations). For specimens permeated with 5, 10, and 20 mM $CaCl_2$ solutions, only the criterion based on chemical equilibrium in $Ca^{2+}$ concentration correlates well with equilibrium in hydraulic conductivity, regardless of prehydration or quality of bentonite. However, all of the termination criteria, except for the volumetric flow ratio and 2 pore volumes of flow for the prehydrated specimens, correlate well with equilibrium in hydraulic conductivity regardless of prehydration or quality of bentonite when permeated with 50 and 100 mM $CaCl_2$ solutions. The results illustrate the uniqueness of the termination criterion based on solute concentration equilibrium between the effluent and the influent with respect to both prehydration and quality of bentonite in the GCLs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.6
• /
• pp.533-540
• /
• 2000

Gonadal development, gametogenesis, reproductive cycle, gonad index, flesh weight rate, and first sexual maturity of the turban shell, Lunella coronata coreensis were investigated by histological observation. The materials used were collected monthly from the rocky intertidal zone of Daehang-ri, Buan-gun, Jeollabuk-do, on the west coast of Korea, from July 1998 to June 1999. Sex of L coronata coreensis was separate. The gonad was widely located in the spirals of the visceral mass buried in the digestive gland. The ovary and testis were composed of a number of oogenic follicles and speymatogenic follicles, respectively. Monthly variations in the gonad index increased from March ($23.86{\pm}3.73$) when the water temperature increased and reached the maximun in July ($49.76{\pm}6.47$). And then, the gonad index sharply decreased in September ($15.58{\pm}2.33$). The flesh weight rate ranged from $25.2{\%}$ to $32.3{\%}$, and its variation showed a similar pattern to the gonad index. Individuals $<5.9 mm$ in shell height could not take part in reproduction in both sexes. Percentages of first sexual maturity of female and male specimens ranging from $7.0{\~}7.9 mm$ in shell heights were $84.6{\%}\;and\;91.7{\%}$, respectively, and $100{\%}$ in those over 8.0 mm in shell height in both sexes took part in reproduction. By studying the monthly changes of the morphological features and sizes of germ cells during gametogenesis in the gonad, the reproductive cycle of this species could be devided into five successive stages: early active (December to April), late active (January to July), ripe (May to August), spawning (July to September), and recovery (September to March). The spawning period of this species was once a year between July and September, and the main spawning occurred in July when the seawater temperature reached above $24.8^{\circ}C$. The fully ripe eggs were $150{\~}160\;{\mu}m$ in diameter.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.36-48
• /
• 2010

The objectives of this study are to research and analyze the positioning of Mt. Back Hwa(白華山) and the characteristics of its neighboring cultural scenery based on the Two Seated Buddah Temple, a small Buddhist temple of Taeul in Taean and to view both landscape geographic codes and religious attractions over Mt. Back Hwa by discussing its expression and meaning for the scenery scattered or nested over this districts. The panoramic view of west shows the character of Mt. Back Hwa as a magnanimity of Buddhist Goddess of Mercy which is viewed as a view point field no less than its location as a landscape target and its singularity as a rocky mountain. The ancient castle, signal beacon post and the small Buddhist temple of Taeul to be read importantly in the old map and SinjeungDongkukyeojiseungram(新增東國輿地勝覽) form the core of place identity, and a number of carve(engrave) letters such as Eopungdae(御風臺), Youngsadae(永思臺), etc. show the prospect of this mountain and monumentality derived from place characteristics. In addition removing of Taeiljeon, a portrait scroll of Dangun, national ancestor makes possible to guess the national status hold by Mt. Back Hwa in advance and to know that it has symbiotic relationship with indigenous religion and shares with the universal locality which have been continued for a long time through a portrait scroll of Dangun enshrined in Samsunggak. More than anything else, however the Rock-carved Buddha Triad in Taean, Giant Buddha of Baekjae era enshrined in the small Buddhist temple of Taeul is not only why Mt. Back Hwa, magnanimity of Buddhist Goddess of Mercy exists but also a signifier. In spite of such a placity, the union ideas of confucianism, buddhism and doctrinism of buddhism prevailed in the Late Joseon Dynasty allows the cultural phenomenon of taoism to be read in the same weight through Ilsogae(一笑溪) and Gammodae(感慕臺) which are mountain stream and pond area respectively centered in the carve letter, 'Taeeuldongcheon(太乙洞天)' constructed in front of the small Buddhist temple of Taeul, the Baduk board type of rock carvings engraved over them and a number of traces of carve letters made by confucian scholars since the Middle of Joseon Dynasty. The reason such various cultural sceneries are mixed in Mt. Back Hwa is in the results of inheritance of religious places and fusion of sprit of the times, and the various type of cultural scenery elements scattered in Mt. Back Hwa are deemed as unique geographic code to understand the multi-layered placity and the characteristics of scenery of Mt. Back Hwa in Taean.