• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.89-99
• /
• 2008

In this paper, the position tracking control problem of the servo system with nonlinear dynamic friction is issued. The nonlinear dynamic friction contains a directly immeasurable friction state variable and the uncertainty caused by incomplete parameter modeling and its variations. In order to provide the efficient solution to these control problems, we propose the composite control scheme, which consists of the robust friction state observer, the FNN approximator and the approximation error estimator with sliding mode control. In first, the sliding mode controller and the robust friction state observer is designed to estimate the unknown internal state of the LuGre friction model. Next, the FNN estimator is adopted to approximate the unknown lumped friction uncertainty. Finally, the adaptive approximation error estimator is designed to compensate the approximation error of the FNN estimator. Some simulations and experiments on the servo system assembled with ball-screw and DC servo motor are presented. Results show the remarkable performance of the proposed control scheme. The robust friction state observer can successfully identify immeasurable friction state and the FNN estimator and adaptive approximation error estimator give the robustness to the proposed control scheme against the uncertainty of the friction parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.513-518
• /
• 1998

In this paper, a robust fault-tolerant control scheme for robot manipulators overcoming actuator failures is presented. The joint(or actuator) fault considered in this paper is the free-swinging joint failure and causes the loss of torque on a joint. The presented fault-tolerant control framework includes a normal control with normal(non-failed) operation, a fault detection and a fault-tolerant control to achieve task completion. For both no uncertainty case and uncertainty case, a stable normal con-troller and an on-line fault detection scheme are presented. After the detection and identification of joint failures, the robot manipulator becomes the underactuated robot system with failed actuators. A robust adaptive control scheme of robot manipulators with the detected failed-actuators using the brakes equipped at the failed(passive) joints is proposed in the presence of parametric uncertainty and external disturbances. To illustrate the feasibility and validity of the proposed fault-tolerant control scheme, simulation results for a three-link planar robot arm with a failed joint are presented.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.17-18
• /
• 2006

In this paper, we propose a robust detection scheme of OSTBCs with channel estimation errors over time-selective fading channels. Channel estimation errors are inevitable over time-selective fading channels and even small channel estimation errors dramatically degrade the performance of space-time block coding schemes. Therefore, it is desired to investigate the effect of channel estimation errors on the performance of the proposed detection scheme compared with the existing detection scheme. The proposed detection scheme minimizes noise enhancement and impact of channel estimation errors which occur in an existing detection scheme. It is shown by simulations that the proposed detection scheme performs better than the existing detection scheme over time-selective fading channels.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.1-4
• /
• 1996

The purpose of this treatise is to estimate speed of an induction motor and realize a robust speed control system with estimated speed in field-weakening region. A speed estimation is based on Model Reference Adaptive System(MRAS) technique and two flux estimator are designed to be robust against parameter variation. The MRAS-based overall control scheme has been implemented on 7.5kW Spindle induction motor control system. And it is verified that the proposed control scheme is very stable and robust in field-weakening region.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.85-85
• /
• 2000

In this paper, we propose a novel robust fault isolation filter design method using the left eigenstructure assignment scheme proposed b\ulcorner author. An eigenstructure assignment methodology that satisfies the required fault isolation conditions is also proposed. The proposed method guarantees that the corrupted ${\gamma}$ simultaneous faults can be isolated when the numbers of available output measurements are ${\gamma}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.428-430
• /
• 1997

An LQG/LTR based gain scheduling control scheme for the two link inverted pendulum is presented. It is shown by simulation that the gain scheduling scheme based on the robust linear control theory still preserves the robust property of the linear control scheme and can be applied to control a class of nonlinear systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.573-576
• /
• 1996

We propose robust control scheme for flexible joint manipulator in the presence of nonlinearity and mismatched uncertainty. The control is designed based on Lyapunov approach. The robust control which is based on the computed torque scheme and state transformation via implanted control is introduced. The design procedure starts with the construction of linearized subsystems via the computed torque method and then uses state transformation. With this approach we do not impose an upper-bound constraint on the inertia matrix in case it is known. Thus, this control can be applied to arbitrary manipulators. The resulting robust control guarantees practical stability for both the transformed system and the original system. The transformation is only based on the possible bound of uncertainty.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.282-284
• /
• 1995

A robust nonlinear control technique for brushless DC(BLDC) motors is presented using a feedback linearizing technique. The nonlinear model of the BLDC motor is first linearized far the exactly known system by an input-output linearizing method. Then, the robust control is designed for the unknown parts of the system using the Lypunov second method. By employing the proposed control scheme, the a robust control performance against the parameter uncertainties is obtained and therefore a robust feedback linerizing control of the BLDC motor is realized. The effectiveness of the proposed control scheme is well demonstrated through the comparative simulations.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권5호
• /
• pp.1131-1145
• /
• 2013

Energy detection is a widely used method for spectrum sensing in cognitive radios due to its simplicity and accuracy. However, it is severely affected by the noise uncertainty. To solve this problem, a blind multiband spectrum sensing scheme which is robust to noise uncertainty is proposed in this paper. The proposed scheme performs spectrum sensing over the total frequency channels simultaneously rather than a single channel each time. To improve the detection performance, the proposal jointly utilizes the likelihood function combined with Gerschgorin radii of unitary transformed covariance matrix. Unlike the conventional sensing methods, our scheme does not need any prior knowledge of noise power or PU signals, and thus is suitable for blind spectrum sensing. In addition, no subjective decision threshold setting is required in our scheme, making it robust to noise uncertainty. Finally, numerical results based on the probability of detection and false alarm versus SNR or the number of samples are presented to validate the performance of the proposed scheme.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.182-192
• /
• 2015

This study develops a digital control scheme with power factor correction for a front-end converter in an electric vehicle battery charger. The front-end converter acts as the boost-type switching-mode rectifier. The converter assumes the two roles of the battery charger, which include power factor control and robust charging performance. The proposed control scheme consists of a charging control algorithm and a grid current control algorithm. The scheme aims to obtain unity input power factor and robust performance. Based on the linear average model of the converter, a constant-current constant-voltage charging control algorithm that passes through only one proportional-integral controller and a current feed-forward path is proposed. In the current control algorithm, we utilized a second band pass filter, a single-phase phase-locked loop technique, and a duty-ratio feed-forward term to control the grid current to be in phase with the grid voltage and achieve pure sinusoidal waveform. Simulations and experiments were conducted to verify the effectiveness of the proposed control scheme, both simulations and experiments.