• Korean journal of communication and information
• /
• v.62
• /
• pp.244-263
• /
• 2013

There have been enormous social impacts on many areas, including science journalism, since the so-called "Hwang Woo Suk" incident. Although wide demand for better science journalism has been aroused since then, but it is hard to find an evidence to prove we have reached the point. This study examines how major Korean newspapers report Unidentified Flying Objects in order to test if the level of science journalism had been elevated. As results, still it is a long road ahead to achieve the goals because most reports were taken from the international news agents or from the witnesses rather than scientific researches and analyses; terminologies used in the stories were ambiguous; follow-up stories were rare, the sources were usually pseudo-scientific, wanton errors in basic facts and coherence, and other problems were found. It could be suggested that the dependency on supplied news to be reduced, journalists who understand both science and journalism are required, inner regulations on science reporting to be established, correct quotations and fact-checks to be accomplished, fairness to be maintained within the boundary of normal science.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.543-553
• /
• 2010

Almost five million citizens a day are using subways as a means of traffic communication in the Seoul metropolitan. As the subway system is typically a closed environment, indoor air pollution problems frequently occurs and passengers complain of mal-health impact. Especially $PM_{10}$ is well known as one of the major pollutants in subway indoor environments. The purpose of this study was to compare the indoor air quality in terms of $PM_{10}$ and to quantitatively compare its source contributions in a Seoul subway platform before and after installing platform screen doors (PSD). $PM_{10}$ samples were collected on the J station platform of Subway Line 7 in Seoul metropolitan area from Jun. 12, 2008 to Jan. 12, 2009. The samples collected on membrane filters using $PM_{10}$ mini-volume portable samplers were then analyzed for trace metals and soluble ions. A total of 18 chemical species (Ba, Mn, Cr, Cd, Si, Fe, Ni, Al, Cu, Pb, Ti, $Na^+$, $NH_4^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, and ${SO_4}^{2-}$) were analyzed by using an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the source of particulate matters. $PM_{10}$ for the station was characterized by three sources such as ferrous related source, soil and road dust related source, and fine secondary aerosol source. After installing PSD, the average $PM_{10}$ concentration was decreased by 20.5% during the study periods. Especially the contribution of the ferrous related source emitted during train service in a tunnel route was decreased from 59.1% to 43.8% since both platform and tunnel areas were completely blocked by screen doors. However, the contribution of the fine secondary aerosol source emitted from various outside combustion activities was increased from 14.8% to 29.9% presumably due to ill-managed ventilation system and confined platform space.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.99-106
• /
• 2006

During the dry periods, many types of pollutant are accumulating on the paved surface by vehicle activities. Particularly, the highways are stormwater intensive landuses because of high imperviousness and high pollutant mass emissions from vehicles. The accumulated pollutants in highways are washed-off during a rainfall event and are highly contributing on water quality of receiving water bodies. The stormwater runoff from the highways are containing various pollutants such as metals, oil & grease and toxic chemicals originated from vehicles. Therefore, this research is performed to find pollutant characteristics in the magnitude of statistical pollutant concentrations during storm periods. During the monitoring periods, the first-flush phenomenon is visibly occurred on most storm events, which is confirmed from hydro- and pollute-graphs. The 95% confidence intervals of washed-off pollutant concentration are ranged to 154.7-257.1 mg/L for 755,138.9-197.6 mg/L for COD, 3.5-6.4 mg/L for oil & grease, 6.3-9.2 mg/L for TN and 2.3-3.31 mg/L for TP. The first flush effect is mostly occurred within initial 30 min of storm duration.

• Journal of KIISE:Software and Applications
• /
• v.37 no.2
• /
• pp.104-109
• /
• 2010

The lighting reflection is a common problem in image analysis and causes the many difficulties to extract distinct features in related fields. Furthermore, the problem grows in the rainy night. In this paper, we aim to remove light reflection effects and reconstruct a road surface without lighting reflections in order to extract distinct features. The proposed method utilizes a 3D analysis based on a multiple geometry using captured images, with which we can combine each reflected areas; that is, we can remove lighting reflection effects and reconstruct the surface. At first, the regions of lighting sources and reflected surfaces are extracted by local maxima based on vertically projected intensity-histograms. After that, a fundamental matrix and homography matrix among multiple images are calculated by corresponding points in each image. Finally, we combine each surface by selecting minimum value among multiple images and replace it on a target image. The proposed method can reduces lighting reflection effects and the property on the surface is not lost. While the experimental results with collected data shows plausible performance comparing to the speed, reflection-overlapping areas which can not be reconstructed remain in the result. In order to solve this problem, a new reflection model needs to be constructed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.34 no.2
• /
• pp.269-280
• /
• 2018

This paper reports the results of field evaluation to determine the levels of heavy metals in major industrial complexes in Korea over a seven year period (2007~2013). The measurement of heavy metal was conducted using quartz fiber filter sampling and ICP-AES analysis. In order to validate the analytical performance of these methods, studies were also carried out to investigate data quality control(QC) parameters, such as the method detection limit (MDL), repeatability, and recovery efficiencies. The average concentrations of total suspended particulates (TSP) for the nine industrial complexes in Korea were $104{\sim}169{\mu}g/m^3$, which was higher than other industrial complexes and urban areas. The Sihwa and Banwol industrial complexes were shown to be the biggest contributing sources to high TSP emission ($159{\mu}g/m^3$ and $169{\mu}g/m^3$, respectively). The concentrations of heavy metals in TSP were higher in the order of Fe>Cu>Zn, Pb, Mn>Cr, Ni, As and Cd. It was observed that Fe was the highest in the Gwangyang and Pohang steel industrial complexes. The concentrations of Zn and Pb were high in Onsan, Sihwa and Banwol industrial complexes, and this was attributed to the emission from the nonferrous industry. Additionally, Cr and Ni concentrations were high in the Sihwa and Banwol industrial complexes due to plating industry. On the other hand, Ulsan and Onsan industrial complexes showed high Cr and Ni concentrations as a response to the emission of metal industry related to automobile. The correlation analysis revealed the high correlation between Cr and Ni in plating industry from Sihwa and Banwol industrial complexes. Adding to this, components related to coal combustion and road dust showed high correlation in Pohang and Gwangyang industrial complexes. Then Onsan and Ulsan industrial complexes showed high correlation among components related to the nonferrous metals.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.146-156
• /
• 1998

To mitigate excessive noise from highways, and high speed rail road, it is often necessary to construct a noise barrier. Absorptive barroer attenuation solution is obtained for the problem of diffration of a plane wave sound source by a semi-infinite plane. A finite region in the vicinity of the edge has an highly absorbing boundary condition ; the remaining portion of the half plane is rigid. The problem which is solved is a mathematical model for a hard barrier with an absorbing edge. If the wavelength of the sound is much smaller than the length scale associated with the barrier, the diffraction process is governed to all intents and purpose by the solution to a standard problem of diffraction by a semi-infinite hard plane with an absorbent edge. It is concluded that the absorbing material that comprises the edge need only be of the order of a wavelength long to have approximately the same effect, on the sound attenuation in the shadow side of the barrier. Traffic noise is composed of thousands of sources with varying frequency content. To simplify noise predictions when barriers are present, an effective frequency of 550Hz may be used to represent all vehicles. The wavelength of sound at f=550Hz for traffic noise is about 2 feet. According to the above conclusion, an absorptive highway noise barrier is only needed to cover to cover approximately a 2 foot length of absorbing material. It would be more economical to cover only the region in the immediate vicinity of the edge with highly sound obsorbent material.

• Journal of Korean Society of Rural Planning
• /
• v.17 no.1
• /
• pp.67-77
• /
• 2011

This survey is focused on analyzing amenity resources for the purpose of offering basic sources for balanced development and the activation of sightseeing in Anmyen-island which has superior landscape resources and the result follows as this. 1. As a result of selecting "Amenities characterized in isles" and comparing their applications in order to choose amenity resource surveying method which is suitable for the isle districts where beaches, tidelands, fishing villages and so on are formed, it was considered that the surveying method of the rural amenity resource in the Korean Society of Rural Planning could be properly used. 2. In spite of a variety of amenity resources besides ten beaches, Anmyeon-island has been developed only focused on beaches. Therefore, it is highly recommended to develop new sightseeing courses which connect beaches with adjacent amenity resources such as theme programs. 3. It proved that compared with Anmyeoneup, Gonammyeon has superior landscape resources and higher special product rates, which is caused by the fact that it doesn't have various kinds of amenities. As diverse fish inhabit the sea and tidelands in Gonammyeon, it is beneficial for activating sightseeing tours to develop fishing village experiencing programs including going fishing. 4. Anmyen-island can be divided into East district and West distict by the national road no,77 and two districts have different distributional features of sightseeing amenity resources. In the west district, amenity resources such as coastal sightseeing routes, large event halls, and resorts have been activated in addition to fourteen beaches which have already been developed while the amenity resources in the east like fishing villages, tidelands, and salt fields have not been activated. Accordingly, for activating balanced sightseeing development in Amyeon-island, it is required to make plans which can incorporate the east amenity resources of sea sightseeing and the west amenity resources of fishing village experiencing programs. As a way, constructing sightseeing routes connecting the west and the east district or making a detour lane connecting beaches in the west, Anmyeon pine trees in the center, and fishing villages in the east.

• Environmental and Resource Economics Review
• /
• v.20 no.1
• /
• pp.1-31
• /
• 2011

By employing Environmental Input-Output Table 2005, which has 76 intermediate sector and 21 energy sources, this paper analyses the flow of energy demand and $CO_2$ after estimating an induced $CO_2$ emissions from 76 industrial sectors. Index of $CO_2$ intensity($CO_2/GDP$) and other index of $CO_2$ intensity($CO_2/calory$) showed that final demand sector uses more high calory energy source. Intermediate sector used less environmental friendly energy source and emit more $CO_2$ at same calory. Industries those has high induced $CO_2$ emissions are Thermal Power($32.587CO_2-g/Won$), Cement($10.370CO_2-g/Won$), Road Transportation($7.255CO_2-g/Won$), Cokes and Other Coal Products($5.791CO_2-g/Won$), Steam and Hot water supply, Sewage, Sanitary services($4.575CO_2-g/Won$). It is shown that industry such as Iron and Steel which has low $CO_2$ intensity, high backward linkage effect and high forward linkage effect makes high induced $CO_2$ emissions. Environmental load and $CO_2$ emissions in overall economy will decrease when not high $CO_2$ intensity industry but also low $CO_2$ intensity industry makes lower $CO_2$ intensity.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.313-321
• /
• 2004

Korean government has offcially decided to adopt global geodetic reference system(ITRF and GRS80) from 2007 keeping pace with the spread of GNSS. Industries related with LBS and telematics have called for use of the new coordinate system suitable for GIS/GPS applications. The government also defined the single plane coordinate system that covers entire korean peninsula as UTM-K considering DB-based framework data and user-friendliness, and its defects were corrected while being applied to the building of road framework data. The TM projection, and origin scale factor of plane coordinate system, 0.9996were employed in order to satisfy the single plane coordinate system for the entire Korean peninsula. For the origin of plane coordinate system, longitude of $127^{\circ}$30'00" and latitude of $38^{\circ}$00'00" were applied and, for the initial value of plane coordinate system, N=2,000.000m and E=1,000,000m were used. In addition to considerable savings in costs, it is expected that the UTM-K is applicable for correcting errors occurred during acquisition of geographic information and for aggregating map data produced by different sources. However, during the initial stage for introduction, confusion is forecasted due to the use of two different coordinate systems, which may be minimized by continued publicity and education.

• Journal of Korean Society of Rural Planning
• /
• v.6 no.1 s.11
• /
• pp.19-28
• /
• 2000

Now in order to overcome the weakest points of the rural areas of the city of Kimje and, transform them into rural cultural villages which have local governing systems suitable to new localization age and activate this plan, we selected Daesan Village as a model village which had shown a lot of potentials in the basic research and studied it dividing it into the former part and the latter part. We studied Daesan village in the former part focusing on state analysis and basic ideas and in the latter part focusing on master plan and detail planning. We can summarize the conclusion like the followings. 1. Daesan Village located 8 kilometer away from the downtown Kimje and the city of Iksan respectably has comparatively good environment of good sunny place as an open field whose surrounding configuration of the ground consists of farming lands and low hills in front and rear. It has 38 farming households in all. 2. Human environment(인문환경); the village road whose width is about 4 meters is forming a flow system forking off into three. There is a route bus which operates three times a day even into the inside of the village. The main sources of revenue are vegetables in facilities, fruits and floriculture. Their average revenue is about 10.5 million won. 3. Here in DaeSan Village a legend dealing with Teasan literally meaning a big mountain consist of th village's tradition and you can see the tombs of a very faithful son and Anwi an army general in the age of the Japanese Invasion of Korea of 1592 to 1598 inside the village. 4. 85 out of the eitire population 141 whose age are over 20 showed very positive attitudes in a questionnaire about, making the village a cultural one and its development. 5. The basic of planned ideas is to increase the revenue of the farming household by making the village a professional farming one which has a state-of the-art production facility and agricultural technique. It is to make the village the one where people can enjoy the sense of the rural life and the farmer can enjoy their lives through consumptive and consistant leisure and resting activities. 6. We are planning to make entrance space, life space, rest and sport space, and cultural space considering the characteristics of the village and the demand of the resident. We are also planning to make tile entire city of Kimje an information transmitting base in short and long term perspectives. 7. DaeSan Village was planned as a place where tradition and the future exist together. On the basis of this concept we planned future programs for Daesan Village and in the latter part of the study master plans and detail plans will be continued.the regional agricultural condition. The development permissions were only during the period of restricted to use ($1979.12{\sim}1993.11$). We propose that the authority of development permission should be given to the local autonomy government, because the local government has the knowledge of its individual agricultural conditions.