• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.145-150
• /
• 2003

Mobile mapping system is a surveying system that use vehicle carrying various sensors as CCD camera, GPS and IMU(Inertial measurement Unit). This system capturing images of forward direction continuously while running road. Use these images, then acquire road and road facilities information as facilities position, size or maintenance condition. In this study, we organized data and each data processing steps that are needed for 3 dimensional positioning. And develop digital photogrammetry S/W easy to use and accurate for mobile mapping system.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.75-81
• /
• 2005

The Necessity of TAB for the facilities of Ventilation and Safety system in a road tunnel is studied. TAB is to test, adjust and balance a system. The study is to investigate the advantage which results from carrying out TAB, with the measurement of temperature, velocity and pressure. The method of measurement of these factors and TAB procedure are a]so explained.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.451-458
• /
• 2023

As forest fires continue to increase in scale worldwide, the importance of forest roads in relation to forest fire prevention and suppression has become increasingly evident. To ensure effective functioning during a forest fire disaster, it is crucial to apply appropriate road planning and ensure roads' structural integrity. However, previous studies have predominantly focused on the impact of forest fires on firebreak efficacy and road placement, meaning that insufficient attention has been paid to ensuring the safety of these facilities. Therefore, this study sought to compare the strength of concrete facilities within areas damaged by forest fires over the past three years by using the rebound hammer test to identify signs of thermal degradation. The results revealed that concrete facilities damaged by forest fires exhibited significantly lower strength (15.6 MPa) when compared with undamaged facilities (18.0 MPa) (p<0.001), and this trend was consistent across all the target facilities. Consequently, it is recommended that safety assessment criteria for concrete forest road facilities be established to prevent secondary disasters following forest fire damage. Moreover, continuous monitoring and research involving indoor experiments are imperative in terms of enhancing the stability of forest road structures. It is expected that such research will lead to the development of more effective strategies for forest fire prevention and suppression.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.122-131
• /
• 2015

Recently, starting with the deep underground road construction plan in Seobu Expressway, Korea, there area many studies on deep underground roads to be newly built. However, there is an extreme lack of safety standards, which does not consider traffic conditions and road driving characteristics. Therefore, this study reviewed safety elements to reflect in the deep underground road planning by analyzing driving stability of longitudinal tunnels with road environments, which resemble deep underground roads. For comprehensive analysis, the characteristics and causes of the accidents that have occurred in seven longitudinal tunnels with a length of 2km or over in Gangwon area, were collected. Specifically, geometric structures and facilities of each tunnel were investigated. Also, the present state of facility installation and the changes in driving speed of vehicles passing through each tunnel were observed to analyze the causes for the traffic accidents in each tunnel and accident reduction alternatives. It was revealed that the most frequent accidents in the tunnels resulted from the changes of traffic flow due to the abrupt speed reduction of forward vehicles, or the failure in speed control of following vehicles during the traffic congestion situation. Moreover, installing facilities such as plane and longitudinal curves, median strips and marginal strips seem to induce consistent driving speed. These results mean that for accident prevention, speed management must be preceded and there is a need to develop and introduce safety facilities actively to control the driving flow of forward and following vehicles.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.256-261
• /
• 2020

Roadside non-point pollution reduction facilities are classified as infiltration, vegetation, reservoir, and wetland types based on their respective pollution reduction mechanisms. However, without a detailed analysis of the road and traffic conditions it is very difficult for civil engineers to determine which category of pollution reduction facility is best suited to their planning requirements. To address this issue, we propose a new decision-making method for the selection of roadside non-point pollution reduction facilities. The principal factors informing the proposed decision-making methods are the road characteristics, including location, structure, number of lanes, and traffic volume. As a result of the study, a total of new pollution reduction plans were developed, with their selection conditions and the corresponding applicable facilities established. The effectiveness of the proposed pollution reduction schemes was demonstrated for roads in Kyounggi-do, providing a valuable basis for future pollution reduction plans.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.44-51
• /
• 2005

In this study, the method of extracting road centerline's coordinate and road facilities is presented using RC helicopter photogrammetry system. From the survey of extracted road centerline, the errors turned out to be -0.117m ~ 0.103m on the X-axis and -0.014m ~ 0.009m on the Y-axis when RC Helicopter photogrammetry system utilized. By application of this system, hereafter, not only management of road facilities but also construction of DB would be enable which need positioning and design of alignment on the access is not easy area such as traffic congestion or toparchy area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5987-5992
• /
• 2013

The authors suggest the extension IFC schema of drainage facilities for the purpose of establishment the information model standard for the roads. IFC entities, types and properties for drainage facilities are defined by the analysis of road design documents for extraction physical component and design information IFC schema is able to be extended through the result of this research. Futhermore, IFC for additional road facilities is able to be used as construction process control, quantity take off, and simulation applications with the interoperability of the IFC.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.11-20
• /
• 2011

This study aimed to devise the method to construct safe and convenient bicycle road by considering the peripheral environmental factor related to using bicycle. Analyzing the existing design of bicycle road and construction case, this study established the method to design bicycle road that reflects site condition and presented the optimal design method for each type of bicycle road to construct safe and convenient bicycle road by analyzing the type of traffic accident for each type of bicycle road, surveying present situation and local survey. It was found that the optimum design of bicycle road for specification, width, curve radius, ascending slope, etc in consideration of peripheral environment and separating traffic between users of traffic means should be done by installing safety sign, safe facilities and separation facilities to design safe bicycle road. Further, the minimum traffic space of bicycle users and connection between bicycle roads should be ensured to design safe bicycle road. It is judged that information related to safety and convenience of bicycle road such as slope, route information, location of convenience facilities, information to the public traffic should be provided so as to activate the users of bicycle.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.9-17
• /
• 2014

PURPOSES : The purpose of this study is to assess removal efficiency of non-point pollutants and applicability for non-point pollutant reduction facilities by conducting the demonstration project operation. METHODS : In order to analyze removal efficiency of non-point pollutants for facilities such as a grassed swale, a small constructed wetland, a free water surface wetland, a horizontal sub-surface flow wetland, and a sand filtration, the field data including specifications of facilities, rainfall, inflow and runoff rainfall effluent etc. was acquired after occurring rainfall events, and the acquired data was analyzed for removal efficiency rate to assess road non-point pollutants facilities using event mean concentration (EMC) and summation of load (SOL) methods. RESULTS : The results of analyzing rainfall effluent, non-point pollutant sources showed that total suspended solid (TSS), chemical oxygen demand (COD), biochemical oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP), chrome (Cr), zinc (Zn), and lead (Pb) can be removed through non-point pollutant reduction facilities by 60.3% ~ 100%. Especially removal efficiency of TSS, COD and BOD is relatively higher than removal efficiency of other non-point pollutant sources in all kind of non-point pollutant facilities. CONCLUSIONS : Based on the result of this study, even though natural type of non-point pollutant reduction facilities for roads occupy small areas comparing with drainage basin areas, most of non-point pollutant sources would be removed through the facilities.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.12
• /
• pp.27-40
• /
• 2014

This paper is to provide the allowable limit blasting-induced vibration for road structures and facilities. For this purpose, first of all, this study examined various allowable limits of different structures from domestic and foreign countries, investigated related problems of the limits used in the country, and suggested the measures to minimize the related problems. Furthermore, this study proposed the blasting-induced vibration limit of road structures and facilities that could be used in the country from comparing and analyzing the various limits from foreign countries. To verify the proposed limit for a practical use in the field, field cases that had both a vibration magnitude and a damage level were collected and they were compared with the proposed limit. In addition, the proposed limit was also compared with the results of analytical and numerical analyses. The comparison and analysis indicated that the proposed limit of different road structures and facilities is valid for the practical use in the field. From this study, the proposed limit is expected to be used as the limit to estimate the damage levels of road structures and facilities due to blasting-induced vibrations in the field.