• Journal of the Korean Geographical Society
• /
• v.52 no.1
• /
• pp.73-103
• /
• 2017

This paper reports the distribution of soil piles set up during the Yimjin(1712) Boundary Making and Demarcation(YBMD). Through the survey on the distribution of soil piles the location of 'Suchul'(水出: seepage zone) could be identified. The endpoint soil pile set up on the east-south bank of Heishigou(黑石溝) stream locates on $42^{\circ}04^{\prime}20.09^{{\prime}{\prime}}N$, $128^{\circ}16^{\prime}08.42^{{\prime}{\prime}}E$. The west beginning point of soil piles distributed in the south side of Tuhexian road locates on $42^{\circ}02^{\prime}20.14^{{\prime}{\prime}}N$, $128^{\circ}18^{\prime}53.40^{{\prime}{\prime}}E$. And the east endpoint of them locates $42^{\circ}01^{\prime}32.97^{{\prime}{\prime}}N$, $128^{\circ}21^{\prime}24.59^{{\prime}{\prime}}E$. From the west beginning point to the soil pile located in 2.1km distance from the beginning point, the distribution direction is west-east. The direction of soil piles after them is northwest-southeast. The total real length of soil piles distributed in the south side of Tuhexian(圖和線) road is about 4.2km more or less. The location of 'Suchul' written on the Mukedeng's map locates on $42^{\circ}01^{\prime}30.36^{{\prime}{\prime}}N$, $128^{\circ}21^{\prime}3.62^{{\prime}{\prime}}E$, The point locates in southeastward 222m distance from the soil piles endpoint of the south side of Tuhexian road. In reference of these reports this paper develops some reinterpretation on the YBMD.

• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.16-20
• /
• 2020

The fatigue happening during the road riding of the vehicle and for the moment the aircraft lands on the runway is closely related to the life cycle of the landing gear, the airframe, the vehicle's suspension, etc. The multiple loads acting on the wheel are longitudinal, lateral, vertical, and braking forces. To study the dynamic characteristics and fatigue stiffness of the vehicle, the dynamic fatigue simulator generally has been used to represent the real road vibration in the lab. It can save time and cost. In hardware, the critical factor in the hydraulic fatigue simulator structure is to decouple each axis and to endure several load vibration. In this paper, the inverse kinematic analysis method derives the magnitude of movement of the hydraulic servo actuator by the coupling after rendering the maximum movement displacement in the axial direction at the center of the dummy wheel. The result of the analysis is that the coupling between the axes is weak to reproduce the real road vibrations precisely.

• Tunnel and Underground Space
• /
• v.13 no.6
• /
• pp.434-443
• /
• 2003

In this study, it was purposed to develop the new method for the prediction of pollutant concentration in road tunnels. The new method was the use of artificial neural network with the back-propagation algorithm which can model the non-linear system of tunnel environment. This network system was separated into two parts as the visibility and the CO concentration. For this study, data was collected from two highway road tunnels on Yeongdong Expressway. The tunnels have two lanes with one-way direction and adopt the longitudinal ventilation system. The actually measured data from the tunnels was used to develop the neural network system for the prediction of pollutant concentration. The output results from the newly developed neural network system were analysed and compared with the calculated values by PIARC method. Results showed that the prediction accuracy by the neural network system was approximately five times better than the one by PIARC method. In addition, the system predicted much more accurately at the situation where the drivers have to be stayed for a while in tunnels caused by the low velocity of vehicles.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.89-97
• /
• 2014

This study investigated how much the spread of traffic control information affect the traffic congestion in order to identify the behavior of the individual drivers that impacts on the entire transport system. For this purpose, agent-based transportation model was constructed. GIS data were directly used for the transportation model and the processing steps of the simulation results are presented. The results showed that the average speed was not lowered when the traffic information was provided to 30 to 70% of total drivers. In contrast, the driver's average speed is reduced when he traffic information was provided to less than 20% or 80% or more. In summary, the provision of traffic information to drivers has an influence on the traffic flow and bypassing vehicles can generate local congestion. This results can be used as a basis for the future direction of road transport policy.

• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.211-219
• /
• 2005

A selection of the analysis section for traffic accidents is used to analyze definitely the cause of accidents sorting similar accidents by a group and to raise the effect of improvement projects deciding the priority of accidents. In the existing method, an uniformly dividing method based on road mileages has been used, which has no consideration for similarities among accidents. Consequently, in recent, a slider-length method considering accident types rather than road mileages is widely used. In this study, using K-mean method, a non-hierarchical grouping technique used in the Cluster Analysis ai a applicatory method for the slider length method, a method classifies accidents that occurred the most nearby mileages into one group is proposed. To verify the proposed method, a comparison between the f-mean method and the dividing method at regular intervals on the data of a total of 25.6km lengths along Kyung-bu freeway in Pusan direction was made so that the K-mean method was proved to an effective method considering the similarities and adjacencies of accidents.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1551-1558
• /
• 2013

The purpose of this study is deriving proper plan which is improving functionality of three-way intersection in two-way road by using shoulder. Alternatives of this study were considered as installation of yield lane and application of TWLTLs (Two-Way Left-Turn Lanes). Case studies to utilize alternatives were limited to national and local roadways which is wider than 11 meters due to be required 3 lanes. Under various traffic conditions such as traffic volume of each direction and left-turn, alternatives were analyzed by simulation. As a results, application of TWLTLs was better than installation of yield lane in terms of improving rate (8.0% vs. 3.7%). Application of TWLTLs is supposed to better alternative, however enough driver education is required to improving safety because it is different with existing driving pattern and/or behaviors. Some limitations and future research agenda have also been discussed by on-site inspections.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.10
• /
• pp.137-145
• /
• 2007

The purpose of this study is developing a virtual bicycle system for improving the ability of postural balance control for adults in various age groups. The system consists of an exercise bicycle that allows tilt in accordance with the postural balance of the subject in the system, a visual display that shows virtual road, and a visual feedback system. The rider of the system tries to maintain balance on the bicycle with a visual feedback of a virtual road while the pedaling speed, the heading direction, and various weight distribution information are updated to the subject as visual feedbacks in the display. A series of experiments were performed with various subjects to find the factors related to postural balance control in the system. The related parameters obtained were weight shift, magnitude of the deviation from the center of the virtual road, and variables related to the movement of the center of pressure. The results found that the ability to control postural balance in the system improved with the presentation of visual feedback information of the distribution of weight. It was also found that the general performance of the subject on balance in the system improved after ten days long training. The results show that the newly developed system can be used for the diagnosis of postural balance as well as for the stimulation of various senses such as vision and somatic sense in the field of rehabilitation training.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.51-56
• /
• 2011

The full-scale experiments are carried out to investigate the fire suppression characteristics of water-based fire fighting systems in a road tunnel. Applied systems are the low-pressure water spray system at 3.5 bar and the high-pressure water mist system at 60 bar. The water flow rate of the high-pressure system is one sixth only of the water spray system. A passenger car and a heptane fuel pan with area of $1.4m^2$ are used as fire sources. A blower system is installed at the tunnel exit to realize the longitudinal ventilation conditions (0.9~3.8 m/s) in the tunnel. Temperatures from the fire source to the down-stream direction are measured by K-type thermocouple trees. The experimental results show that the cooling effect of the high pressure water mist system in the test conditions were equivalent to that of the low pressure water spray system for B-class fire.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.4
• /
• pp.351-358
• /
• 2006

The farming and fishing village roads is located in a mountainous geographical feature, a resident's movement zone is followed by many restrictions in economic activities or social activities. Establishment of general planning gets into guide of long-term development direction for road in farming and fishing villages area. This study examined and analyzed a regional characteristics such as a regional environment and traffic condition, etc. and an actual condition of farming and fishing village roads, selected a factor affecting a priority to open a road, calculated a weight per each factor by AHP & Statistical analysis techniques, converted it into GIS database, and determined a priority for paying forming and fishing village roads. It is that development precedence and estimation calculation are decided applying result of research, GIS and AHP and statistical processing techniques.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.375-382
• /
• 2020

Rock drop obstacles on major roads in the border area in South Korea has been installed and operated to prevent and block the movement of enemy units. However, the increase in traffic volume due to the development of the border region causes many problems such as road traffic congestion due to rock drop, traffic safety, and impaired urban aesthetics. Therefore, this study aimed to provide guidelines for demolition and replacement facility installation for rock drop obstacles, which are differently applied to each unit, and to suggest the direction of the Ministry of National Defense's policy regarding maintenance cost for necessary rock drop obstacles required for operation. In this study, as part of a guideline study on the removal of rock drop obstacles and the installation of alternative facilities, a standard unit price was suggested for essential rock drop obstacles, so as to be used as judgment data when deciding whether to remove rock drop obstacles.