• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.326-331
• /
• 2005

In this study, bearing response in single lap riveted joint is investigated by menas of single lap shear specimens with different types of adherend and fastener. Single lap shear specimen consists of adherend of SUS403 and carbon fabric/epoxy composite. Rivet of Avdel 2691 with 9.6mm diameter is used. Two types of fastener in single lap riveted joint are considered. One is a single lap shear specimen with single fastener, and the other is a single lap shear specimen with double fasteners. Especially, in case of single lap shear specimen with single fastener, the width of the specimen is varied as 2D, 3D, 4D, 6D at a fixed edge distance of 3D. Also the edge distance of the specimen is varied as 1.0D, 1.5D, 2.0D, 2.5D, 3.0D at a fixed width of 4D. In case of single lap shear specimen with double fasteners, two types of specimen are considered. One is a specimen with the width of 6D and edge distance of 3D. The other is a specimen with the width of 4D and edge distance of 2D. Here D designates the hole diameter for riveted joint.

• Advances in aircraft and spacecraft science
• /
• 제5권5호
• /
• pp.595-613
• /
• 2018

The objective of our study is to analyze the behavior of bonded, riveted and hybrid (bonded / riveted) steel / steel assemblies by tensile tests and to show the advantage of a hybrid assembly over other processes. the finite element method with the ABAQUS numerical code was used to model the fracture behavior of the different assemblies. Cohesive zone models (CZM) have been adopted to model crack propagation in bonded joints using a bilinear tensile separation law implemented in the ABAQUS finite element code. The riveted assemblies were modeled with the XFEM damage method identified in this ABAQUS numerical code. Both CZM and XFEM methods are combined to model hybrid assemblies. The results are consistent with the experimental results and make it possible to guarantee the validity of the applied numerical model. The use of a hybrid assembly shows a high resistance compared to other conventional methods, where the number of rivets has been highlighted. The use of the hybrid assembly improves mechanical strength and increases service life compared to a single lap joint and a riveted joint.

• Advances in aircraft and spacecraft science
• /
• 제4권1호
• /
• pp.1-19
• /
• 2017

Fatigue life prediction of a multi-row countersunk riveted lap joint was performed numerically. The stress and strain conditions in a highly stressed substructure of the joint were analysed using a global/local finite element (FE) model coupling approach. After validation of the FE models using experimental strain measurements, the stress/strain condition in the local three-dimensional (3D) FE model was simulated under a fatigue loading condition. This local model involved multiple load cases with nonlinearity in material properties, geometric deformation, and contact boundary conditions. The resulting stresses and strains were used in the Smith-Watson-Topper (SWT) strain life equation to assess the fatigue "initiation life", defined as the life to a 0.5 mm deep crack. Effects of the rivet-hole clearance and rivet head deformation on the predicted fatigue life were identified, and good agreement in the fatigue life was obtained between the experimental and the numerical results. Further crack growth from a 0.5 mm crack to the first linkup of two adjacent cracks was evaluated using the NRC in-house tool, CanGROW. Good correlation in the fatigue life was also obtained between the experimental result and the crack growth analysis. The study shows that the selected methodology is promising for assessing the fatigue life for the lap joint, which is expected to improve research efficiency by reducing test quantity and cost.

• 비파괴검사학회지
• /
• 제21권2호
• /
• pp.163-168
• /
• 2001

접착제와 리벳으로 접합된 항공기 판재의 접합부는 접합 불량, 크랙, 피로 결함이나 부식등에 의해 손상되고 열화될 수 있으며 이런 결함을 전 영역에 걸쳐서 신속하고도 신뢰성 있게 검사하는 것은 항공기 안전을 위해 매우 중요하다. 본 연구에서는 이를 위해 항공기용 알루미늄 판재의 랩 스플라이스 접합 연결부의 접합 품질을 비접촉 방식으로 수행할 수 있는 초음파 비파괴 평가법을 제안한다. 여기서는 레이저를 이용해 램파를 발생시키고 비접촉식 트랜스듀서 (공기정합 용량형 트랜스듀서)를 이용해 피치-캐치 방식으로 검사한다. 레이저 소스로는 Q-스위치된 Nd:YAG 레이저가 이용되며 배열 형태의 직선 슬릿을 갖는 마스크를 이용해 특정 모드의 램파를 발생시켜 이용하였다. 접합부의 한 쪽에서 발생된 레이저 여기 초음파는 판을 따라 전파하여 접합부를 지나 반대편에서 수신되고 수신된 신호의 특성과 접합부의 품질과의 관련성을 조사하였다.

• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.841-850
• /
• 2008

본 연구에서는 탄소 복합재와 알루미늄 2024-T3 단일겹침 체결부에 대해, 체결방법을 접착, 리벳, 리벳/접착 하이브리드의 세 가지로 변화시키면서 체결방법에 따른 파손하중과 파손모드를 실험을 통해 연구하였다. 세 가지 체결방법에 대해 각각 겹침길이 3가지와 적층순서 2가지, 총 82개의 시편을 제작하였다. 접착제는 FM73m, 리벳은 NAS9308-4-03을 사용하였다. 접착 체결과 하이브리드 체결에서는 겹침길이가 커짐에 따라 파손하중이 증가하였고, 리벳 체결에서는 겹침길이에 따른 파손하중 변화가 나타나지 않았다. 단순 접착 및 리벳 체결부에서는 적층순서에 따른 일관된 경향을 발견하기 어려운 반면, 하이브리드 체결부에서는 인접층의 적층각 차이가 작은 적층판을 사용한 체결부의 파손하중이 높게 나타났다. 접착 체결과 하이브리드 체결의 주된 파손모드는 층간분리이고 리벳 체결은 국부적 베어링 파손을 동반한 리벳 파손으로 나타났다.