• Journal of the Korean Society of Safety
• /
• v.37 no.5
• /
• pp.22-32
• /
• 2022

The domestic smart factory is being built and spread rapidly, mainly by mid-sized companies and large enterprises according to the government's active introduction and support policy. But these factories only promote production system and efficiency, so harmfulness and risk factors are not considered. Therefore, to derive harmful risk factors in terms of industrial safety for 12,983 government-supported smart factory workplaces from 2014 to 2019, industrial accident status analysis compared workplaces with automation facilities and government-supported workplaces with automation facilities. Also, to reduce risks associated with domestic smart factory processes, twenty government-supported workplaces with automation facilities underwent analysis, evaluating risks through a status survey using the process evaluation table. In addition, the status survey considered region, size, industry, construction level, and accident rate; the difference in risk according to the structure of the process was confirmed. Based on the smart factory process evaluation results, statistical analysis confirmed that serial, parallel, and hybrid structures pose different risk levels and that the risks of mixed structures are greater. Finally, safety control system application was presented for risk assessment and reduction in the smart factory process, reflecting the results of disaster analysis and actual condition investigation.

• Journal of Technology Innovation
• /
• v.21 no.1
• /
• pp.165-198
• /
• 2013

The purpose of the study is to identify risk factors and analyze risk impacts to increase R&D outcome by taking into consideration the activities undertaken in each phase of New Product Development(NPD) process. The paper builds on survey research that has been developed new IT products within the past 5 years at SAMSUNG and LG subsidiaries in the Republic of Korea. This study identified risk factors in accordance with NPD process and evaluated the identified risk factors with survey questionnaires. To analyze the risk impacts were used to perform a logistic regression analysis based on R&D output. The impact of risk factors were higher for the low-output group. High-output group took a risk into consideration unique undertakings in project management and managed risk factors effectively in order to increase R&D output. Consequently, with the aim of improving output of R&D, a risk management is necessary to identify the risk factors for each phase of NPD and focus on managing risk factors with great effect.

• Toxicological Research
• /
• v.17
• /
• pp.17-24
• /
• 2001

Risk assessment is useful tool making good decisions on the risks of certain hazardous com-pound and suggests safe margin through scientific process using toxicological data, statistical tool, exposure value and relevant variants. The goal of risk management is to protect the public health from hazardous compound based on result of risk assessment having reality. For the suggestion of exact man-aging information, risk assessment must be designed to represent a "plausible estimate" of the exposure to the individuals and to minimize uncertainty. Risk assessment methodology and knowledge are expected to change more rapidly than before and up-to-date methodology should be applied in regulatory aspects through the Agency. For the useful application of risk assessment, the communication between the risk assessor and the risk manager is needed before the initiation of the risk assessment and upon its completion. Generally, the risk assessment itself as a practical tool in the regulatory decision making process would be regarded with social economic impact.ic impact.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.1
• /
• pp.265-274
• /
• 2016

In this paper, we consider a diffusion risk process, in which, its surplus process behaves like a Brownian motion in-between adjacent epochs of claims. We assume that the claims occur following a Poisson process and their sizes are independent and exponentially distributed with the same intensity. Our main goal is to derive the exact formula of the joint moment generating function of the ruin time and the total amount of aggregated claim sizes until ruin in the diffusion risk process. We also provide a method for computing the related first and second moments using the joint moment generating function and the augmented matrix exponential function.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.33-39
• /
• 2019

in 2010s, many factories are operating without any safety guarantees due to the aging process. Although it is difficult to fundamentally solve the problem of aging process and equipment, Prevent risk by risk assessment in advance. This study targets the corrosion caused by sulfur in the piping in the CDU(Crude Distillation Unit) process desulfurization equipment and conducts the risk assessment by RBI(Risk Based Inspection) referring to API RP 581. RBI expresses the risk by combining frequency and consequence, and creates a risk matrix based on these expression. In this study, the hole size of the pipe was selected as Small and Medium, and the sensitivity of the frequency was selected as 'Low'. You can refer to the Risk Matrix created from the standard to evaluate the risk of corrosion of sulfur from pipes in the piping and to plan future accident prevention. Similarly, prevention of aging in a similar way can prevent large and small incidents that are not visible.

• Korean Management Science Review
• /
• v.28 no.3
• /
• pp.73-82
• /
• 2011

Basel II advanced measurement approaches for operational risk need to estimate the frequency and severity distribution of operational losses. Due to lack of internal loss data, the estimation is impossible in many cases and so external loss data might be used by scaling on asset or gross income. To get around lack of loss data, scenario analysis combined with loss distribution approach can be useful in calculating the capital charge of operational risk. However, scenario based loss distribution approach requires much time and effort. Instead we may apply the analytic hierarchy process to measure operational risk of financial institutions. The analytic hierarchy process combined with loss distribution approach is to estimate the capital charge of operational risk in other areas based on the operational VaR in an area with sufficient loss data. AHP provides a tool for timely measurement of operational risk in this rapidly changing global environment.

• Journal of the Korean Society of Safety
• /
• v.35 no.2
• /
• pp.61-66
• /
• 2020

As asbestos-containing buildings are getting older, asbestos deconstruction works are increasing. As a result, accident risks such as falls, cuts, electric shocks, and suffocation are increasing. Existing studies are mostly about health management and institutional policy research and there is little research on work risk. So workplace risk assessments that are easily applicable in the field are required to be applied. Sealing is the first process of asbestos deconstruction and is the first step to ensure worker's safety. Job Safety Analysis(JSA) and Checklist were used to identify the risk factors and to calculate the level of the risk. By comparing the two risk assessment tools, it was figured out that the JSA is appropriate for the initial process and change of work procedure while Checklist is appropriate for repetitive work. Because the sealing process is sort and simple, it is unlikely to cause serious injury. But since the risk of falling and cuts are exist, safety education and supervision are necessary to maintain a safe working environment.

• KIEAE Journal
• /
• v.8 no.2
• /
• pp.79-86
• /
• 2008

A housing project is very sensitive the changing environment. Therefor, a housing project is the high risk. Therefor in order to be succeed the project it becomes necessary to effectively manage the risk involved in the process of the housing project. This study analysed the risk factors that involved in the process of the housing project as compared with the precede research. The results of this research are as follows : First, complete feasibility study and verification with conviction in market and environment are required. And, securing organization and specificity for simulation and variation of environment are required in the process by step. And then, complaint and flaw are required in the final stage. The results of this study can be used as the guideline to make the risk management system for the housing project.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.3
• /
• pp.257-263
• /
• 2013

The classification of risk factors and the identification of risk acceptance criteria are core works to assess risk levels with high enough confidential level in the field of marine traffic environment. In the previous study work, the twenty kinds of risk factors and its assessment criteria for the domestic marine traffic environment were proposed. In this paper, with these previous studying results, the relative importance of the risk factors were analyzed by questionnaire survey of marine traffic experts using the analytic hierarchy process. The analysis results showed that the relative importance of the visibility restriction is the highest among the twenty kinds of risk factors, and the relative importance of the traffic condition is the highest among the five kinds of risk categories. As results from analysis, it is expected that the approaching method on the relative importance is to be one of basic techniques for the development of risk assessment models in the domestic marine traffic environment.

• Journal of Fashion Business
• /
• v.9 no.3
• /
• pp.22-36
• /
• 2005

This research is to classify psychological risk perceptions in purchases process at counterfeit at fashion luxury brands, into a risk perception on purchase activity itself and a risk perception on the post-purchase situation, and to analyze types and characteristics at risk reduction behaviors to reduce each risk perception. In this research a qualitative method was employed, and research-related data were collected and analyzed through in-depth interviews. Results were shown that risk reduction behaviors at psychological risk perception on purchase activity itself included rationalization of purchase, accompanied purchase, reduction and discontinuance of purchase, and that risk reduction behaviors of psychological risk perception on the post-purchase situation included information search, establishment of selection criteria, establishment of marginal limit, selective purchase, planned and compared purchase, and reduction and discontinuance of purchase. Previous researches suggested brand loyalty, selection of famous brands, utilization of information agents by marketers, pre-purchase usage and guaranteed purchase, but these risk reduction methods were not utilized, this probably being interpreted as a result of characteristics of counterfeit. In addition, risk reduction behavior of one type tended to reduce risk perception of several other types, and risk reduction behaviors of various types were utilized to reduce a certain type's risk perception. Not only types of risk perception but also levels of risk perception appeared to have exerted influence to risk reduction behaviors.