• 대한전자공학회논문지SD
• /
• 제49권1호
• /
• pp.15-24
• /
• 2012

본 논문에서는 Switched-Capacitor 지연 기법의 새로운 고해상도 DPWM 발생기를 사용한 Dynamic-Response-Free SMPS를 제안한다. 제안된 회로는 Switched-Capacitor 지연 기법을 이용한 DPWM 발생기의 내부 커패시터 전압 기울기를 제어하는 방식으로 DPWM의 duty ratio를 결정한다. 제안된 회로는 컨버터의 피드백 전압과 기준전압을 비교하여 DPWM 발생기의 내부 캐패시터에 충방전되는 전류량을 제어하는 방식으로 출력전압 tracking이 가능하다. 따라서 제안된 회로는 기존 closed loop 제어 방식의 SMPS들에서 문제점이 되고 있는 동적 응답특성을 고려할 필요가 없으며, 출력 전압에 overshoot/undershoot로 인한 ringing 현상이 발생하지 않는다는 큰 장점을 가진다. 제안된 회로는 1MHz~10MHz까지 스위칭주파수를 사용자가 선택할 수 있으며, 100MHz의 내부 제어 동작 주파수로 10MHz 최대 스위칭 주파수(DPWM) 발생이 가능하다. 100MHz의 내부 제어 동작 주파수를 사용하여 10MHz 스위칭 주파수 발생시 소모되는 내부 회로의 최대 전류는 2.7mA이며, 출력 버퍼를 포함한 전체 시스템의 전류 소모는 15mA이다. 제안된 회로는 0.125%의 DPWM duty ratio 해상도를 가지고 부하에 최대 1A까지 전류공급이 가능하며, 최대 리플 전압은 8mV이다. 동부하이텍 BCD $0.35{\mu}m$ 공정 파라미터를 이용해 시뮬레이션을 수행하여 제안된 회로의 동작을 검증하였다.

• 한국군사과학기술학회지
• /
• 제15권2호
• /
• pp.201-207
• /
• 2012

Pulsed lasers at the 613 nm and 1064 nm wavelengths on nanoseconds have been utilized to characterize the damage on Si photodiode exposed to intense illumination. Morphological damages and structural changes at sites on the photodiode irradiated during microseconds of laser pulses were analyzed by FE-SEM images and XRD patterns, respectively. The removal of oxide coating, ripple, melting marks, ridges, and crater on photodiodes were definitely observed in order of increasing the pulse intensities generated above the damage threshold. Then, the degradation in photosensitivity of the Si photodiode irradiated by high power density pulses was measured as a function of laser irradiation time at the various wavelengths. The free charge carrier and thermal diffusion mechanisms could have been invoked to characterize the damage. The relative photosensitivity data calculated using the thermal diffusion model proposed in this paper have been compared with the experimental data irradiated above the damage threshold.

• Journal of Preventive Medicine and Public Health
• /
• 제45권4호
• /
• pp.267-275
• /
• 2012

Objectives: This study was conducted to assess the potential health impacts and improve the quality of the free immunization program in Jinju City by maximizing the predicted positive health gains and minimizing the negative health risks. Methods: A steering committee was established in September 2010 to carry out the health impact assessment (HIA) and began the screening and scoping stages. In the appraisal stage, analysis of secondary data, a literature review, case studies, geographic information systems analysis, a questionnaire, and expert consultations were used. The results of the data collection and analyses were discussed during a workshop, after which recommendations were finalized in a written report. Results: Increased access to immunization, comprehensive services provided by physicians, the strengthened role of the public health center in increasing immunization rates and services, and the ripple effect to other neighboring communities were identified as potential positive impacts. On the other hand, the program might be inaccessible to rural regions with no private clinics where there are more at-risk children, vaccine management and quality control at the clinics may be poor, and vaccines may be misused. Recommendations to maximize health gains and minimize risks were separately developed for the public health center and private clinics. Conclusions: The HIA provided an opportunity for stakeholders to comprehensively overview the potential positive and negative impacts of the program before it was implemented. An HIA is a powerful tool that should be used when developing and implementing diverse health-related policies and programs in the community.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.221-230
• /
• 1988

본 연구의 목적은 마이크로컴퓨터를 사용하여 유압모터로 구성된 전기 유압 서보 시스템의 속도제어를 하는데 있어서 제어방법과 제어기 기본 하드웨어인 마이크로프로세서와 A/D, D/A 변환기의 해상도(resolution)가 전체 시스템의 성능에 미치는 영향을 주로 실험적으로 연구하는데 있다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권7호
• /
• pp.315-322
• /
• 2001

High speed brushless permanent magnet(PM) machines need a key technology to minimize the iron core losses in stator and the eddy current losses in the retained sleeve and magnets caused by slotting harmonics. Thus, slotless or iron-coreless brushless PM machines have been applied for a very high rotational speed and/or the ripple-free torque. Unfortunately, slotless or coreless PM machines have lower open-circuit field than slotted and/or iron-cored types, which cause to reduce power density. Fortunately, Halbach array can generate the strong magnetic field systems without additional magnetic materials. In this paper, the 4-pole Halbach array is applied to the high speed machine and is compared with the radial magnetized PM array in field system. The iron-/air-cored stator of PM machine is constructed with/without winding slots. Open circuit magnetic fields of each type are presented from the analytical method and finite element method. Consequently, it is confirmed that the Halbach array field system with slotless stator is more suitable to the high speed motor because it has high flux density, sinusoidal flux distribution than others.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.292-300
• /
• 2009

This paper presents an LED BLU driving circuit with a local-dimming structure. The efficiency of the proposed LED driver has been improved by parallel driving 8 serial-connected LED arrays. It employed the soft-switching boost converter topology to reduce the switching power loss of the hard switching boost converter. Soft- and hard-switching converters have the same structure except that the free-wheeling diode in the hard-switching converter is replaced with the n-channel MOSFET in the soft-switching one. The proposed boost converter was compared with the hard switching converter. The soft-switching converter reveals superior ripple and efficiency. A smaller inductance can be used for the soft-switching converter contrasting to the hard-switching one. We also studied on an over-voltage protection circuit of the output of the driver at the no load condition. The protection circuit was applied to the proposed driver, and its operation was confirmed by experiment. Using a local-dimming technique, power consumption of LCD BLUs can be reduced as low as possible according to the brightness of its image.

• 디지털산업정보학회논문지
• /
• 제9권4호
• /
• pp.251-265
• /
• 2013

The emergence of social network services, is changing the foundation of human relationship formation and method of communication of individuals through sharing of free information. Social network service is a service to support or facilitate an on-line extension of off-line network among people by helping them to share personal profile. History of social network services very short. But users of the various layers is increasing rapidly and ripple effect social as a result is very large. The focus of existing research was mainly devoted to motivation of use and acceptance of social network services. Currently the use of SNS was maturing. Thus, in-depth research on the use pattern of SNS users is needed. The purpose of this study is that, for Facebook in social network services, to analyze the changes in the initial stage of use, medium-term, usage patterns at the current time. Results of the study by analyzing the characteristics of the change in the pattern of usage of user of Facebook, it can be used as basic materials for SNS researchers and service provider.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 춘계학술대회
• /
• pp.193-197
• /
• 2004

The four-leg Voltage Source Converter(VSC) can use the DC link voltage effectively by the 3-D SVPWM method. Hence the DC battery voltage can be reduced by $15\%$ in comparison to that of the conventional line-interactive UPS system. In this paper a novel line interactive Uninterruptible Power Supply(UPS) using the two four-leg VSCs is proposed. One VSC is in parallel with the ac link reactor of the power source side, and the other is in series with the load. The parallel four-leg voltage source inverter controls the three-phase line voltage independently in order to control the line reactor current indirectly. It eliminates the neutral line current and the active ripple power of the source side using the pqr theory so that unity power factor and the sinusoidal source current can be achieved even though both the source and the load voltages have zero sequence components. The series four-leg voltage source inverter compensates the line voltage and allows it to be balanced and harmonic-free. Both of the parallel and series four-leg voltage source inverters always act as independently controllable voltage sources, so that the three-phase output voltage shows a seamless transition to the backup mode. The feasibility of the proposed UPS system has been investigated and verified through computer simulations results.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.384-390
• /
• 2022

In this study, a single-stage, four-phase, interleaved, totem-pole AC-DC converter is proposed for a super-fast charger station that requires high power, a wide voltage range, and bidirectional operation capabilities and adopts various types of electric transport vehicles. The proposed topology is based on current-fed push-pull dual active bridge converter combined with the totem-pole operation. Owing to the four-phase interleaving effect, the bridge on the grid side can switch at 0.25, 0.5, and 0.75 to achieve a ripple-free grid current. The input filter can be removed theoretically. Switching methods for the duty of the secondary-side duty cycle are proposed, and they correspond to the primary duty cycle for reducing the circulating power and handling the total harmonic distortion. Therefore, the converter can operate under a wide voltage range. Experimental results from a 7.5 kW prototype are used to validate the proposed concept.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.77-81
• /
• 2004

In this paper a novel line interactive UPS (Uninterruptible Power Supply) using the two 4-leg VSCs and AC line reactor is proposed. The 4-leg Voltage Source Converter(VSC) can use the DC link voltage effectively by the 3-D SVPWM method. Hence the DC battery voltage can be reduced by $15\%$ in comparison to that of the conventional line-interactive UPS system. One VSC is in parallel with the AC line reactor of the power source side, and the other is in series with the load. The parallel 4-leg voltage source inverter controls three-phase line voltage independently in order to control the line reactor current indirectly. It eliminates the neutral line current and the active ripple power of the source side using the pqr theory so that unity power factor and the sinusoidal source current can be achieved even though both the source and the load voltages have zero sequence components. The series 4-leg voltage source inverter compensates the line voltage and allows the load voltage to be balanced and harmonic-free. Both of parallel and series 4-leg voltage source inverters always act as independently controllable voltage sources, so that three-phase output voltage shows a seamless transition to the backup mode. The feasibility of the proposed UPS system has been investigated and verified through computer simulation results.