• Informatization Policy
• /
• v.28 no.4
• /
• pp.54-75
• /
• 2021

The right to data portability needs to be introduced to strengthen the self-control of data subjects and promote personal data use. However, the right to data portability constitutes a high risk of invasion of privacy of data subjects and may infringe on the property rights of data controllers, so careful and thorough design is warranted. The right to data portability can intensify the concentration and monopoly of personal data, result in problems of overseas transfer of personal data held by public institutions, and enrich only the profits of giant platforms by burdening the data subject with high transfer cost. By contrast, SMEs are more likely to endure a personal data deprivation. From the proposed amendment to the Personal Data Protection Act are raised various legal issues such as. i) Whether to include inferred/derived data, personal data held by public institutions, activity data, sensitive data, and personal data of third parties within the scope of data portability; ii) whether SMEs are included in the data porting organization; iii) whether to exclude SMEs or large platforms from the scope of the data receiving organization; iv) Whether to allow the right to transmit to other data controllers, v) Whether to allow the overseas transfer of personal data held by public institutions, vi) How to safely exercise the right to data portability, vii) the scope of responsibility and immunity of a data porting organization, etc. The purpose of this paper is to propose the direction for legislative action based on various legal issues related to data portability.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1758-1769
• /
• 1995

The heat transfer of oscillating flow in a cylinder with regenerator was investigated by the moving boundary technique. The flow in regenerator was modeled by means of Brinkman Forchheimer-Extended-Darcy equation . Results showed that when piston moved toward right, velocity vectors near cylinder wall at left piston and right side of regenerator inclined to symmetric axis and velocity vectors near cylinder wall at right piston and left side of regenerator inclined to cylinder wall. And the time averaged Nusselt number was increased by 46.73% when the oscillatory frequency became twice and decreased by 31.46% when the oscillatory frequency became half. The time averaged Nusselt number was increased by 18.09% when thickness of the regenerator became twice and decreased by 7.53% when thickness of the regenerator became half. But mesh size of regenerator hardly affected the Nusselt number. And efficiency of regenerator was larger as the oscillatory frequency was smaller, thickness and mesh size of regenerator was larger.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.4
• /
• pp.266-271
• /
• 2018

A 66-year-old woman was referred for treatment of incidental detection of two intracranial aneurysms. Time-of-flight MR angiography (TOF MRA) revealed two aneurysms at the M1 segment of the right middle cerebral artery, and clinoid segment of left internal carotid artery, respectively. On digital subtraction angiography, there was a saccular aneurysm on the left internal carotid artery, but the other aneurysm was not detected on the right middle cerebral artery. Based on comprehensive review of imaging findings, organized thrombosed aneurysm was judged as the most likely diagnosis. In the presented report, magnetization transfer (MT) pulse to TOF MRA was used, to differentiate aneurysm-mimicking lesion on TOF MRA. We report that MT technique could be effective in differentiating true aneurysm, from possible T1 high signal artifact on TOF MRA.

• Archives of Plastic Surgery
• /
• v.32 no.3
• /
• pp.319-326
• /
• 2005

This study was designed to investigate the optimal period of pedicles implantation in the prefabricated periosteofascial flap using a vascular tissue transfer. Flap prefabrication was prepared with a transposition of the central pedicles of right auricle on the calvarium of the New Zealand white rabbit. Thirty flaps were divided into five groups of six flaps, including control group (group I) of the conventional periosteofascial flap based on the right lateral border of parietal bone. The prefabricated flap was elevated as a $2{\times}2cm$ sized island flap and reposed in place in 1, 2, 3, and 4 weeks after the pedicles transfer in groups II, III, IV, and V, respectively. Five days after flap repositioning, the flap viability and vascularity were evaluated with microangiography and histological study quantitatively. The flap survival was increased in accordance with the implanted period of the pedicle. New vessels developed around the implanted pedicle in the 2nd week, and overall vascularization of the flap was accomplished in the 3rd week. The flap with 4 weeks of implantation period, however, showed the same survival rate as the control group. In conclusion, prefabricated periosteo- fascial flap can be created with a vascular tissue transfer, and the optimal duration of the pedicle implantation is more than 4 weeks to obtain adequate flap survival.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.3
• /
• pp.361-373
• /
• 2011

In line with post-1970s industrialization, the manpower shortage in fishing villages has been fueled by rapid desertion; young adults and middle-aged people have tended to avoid fishing by migrating to cities, driving the emergence of a national issue in terms of securing fisheries management succession. For the fisheries industry to maintain competitiveness, we need to cultivate young adults and middle-aged people to be leaders of the domestic fishing industry through promoting inspiration for the fishing industry, teaching fisheries expert knowledge, and fostering the ability to promote business. In addition to safe supply of marine products through continued fisheries operation, securing young and skilful workers is essential in order to promote balance development of domestic industries, including job creation. The study therefore seeks to provide measures to foster specialists in order to enable the transfer of management through an opinion survey of fishermen. To cultivate specialists for enabling the transfer of management, the following solution should be promoted at the state level. First, to support the introduction of young and talented workers to the fisheries industry through transfer of management, Second, in order to enable the transfer of management, change is required first in the fisheries industry for it to become a value-added industry. Third, despite fisheries being a composite industry that is syncretized to tertiary industries from primary industries, the fisheries industry is still recognized as a labor intensive industry, which reflects the current status of fisheries education.

• Fire Science and Engineering
• /
• v.11 no.1
• /
• pp.21-35
• /
• 1997

The natural convection and combined heat transfer induced by fire in a rectangular enclosure is numerically studied. The model for this numerical analysis is partially opened right wall. The solution procedure includes the standard k-$\varepsilon$ model for turbulent flow and the discrete ordinates method (DOM) is used for the calculation of radiative heat transfer equation. In numerical study, SIMPLE algorithm is applied for fluid flow analysis, and the investigations of combustion gas induced by fire is performed by FAST model of HAZARD I program. In this study, numerical simulation on the combined naturnal convection and radiation is carried out in a partial enclosure filled with absorbed-emitted gray media, but is not considered scattering problem. The streamlines, isothermal lines, average radiation intensity and kinetic energy are compared the results of pure convection with those of the combined convection-radiation, the combined heat transfer. Comparing the results of pure convection with those of the combined convection-radiation, the combined heat transfer analysis shows the stronger circulation than those of the pure convection. Three different locations of heat source are considered to observe the effect of heat source location on the heat transfer phenomena. As the results, the circulation and the heat transfer in the left region from heating block are much more influenced than those in the right region. It is also founded that the radiation effect cannot be neglected in analyzing the building in fire. And as the results of combustion gas analysis from FAST model, it is found that O2 concentration is decreased according to time. While CO and CO2 concentration are rapidly increased in the beginning(about 100sec), but slowly decreased from that time on.

• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.321-325
• /
• 2013

The problem of mixed convection in a differentially heated lid-driven square cavity filled with Cu-water nanofluid under effect of a magnetic field is investigated numerically. The left and right walls of the cavity are kept at temperatures of $T_h$ and $T_c$ respectively while the horizontal walls are adiabatic. The top wall of the cavity moves in own plane from left to right. The effects of some pertinent parameters such as Richardson number (ranging from 0.1 to 10), the volume fraction of the nanoparticles (ranging 0 to 0.1) and the Hartmann number (ranging from 0 to 60) on the fluid flow and temperature fields and the rate of heat transfer in the cavity are investigated. It must be noted that in all calculations the Prandtl number of water as the pure fluid is kept at 6.8, while the Grashof number is considered fixed at 104. The obtained results show that the rate of heat transfer increases with an increase of the Reynolds number, while but it decreases with increase in the Hartmann number. Moreover it is found that based the Richardson and Hartmann numbers by increase in volume fraction of the nanoparticles the rate of heat transfer can be enhanced or deteriorated compared to the based fluid.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.68
• /
• pp.1-21
• /
• 2015

The purpose of this study is to propose a new mechanism for the global transmission of electronic trade documents and to promote them using it. Trade settlement methods are changed from L/C bases to non-L/C bases and in particular, the telegraphic transfer is dramatically increased since mid 1990. But the status of transmission of electronic trade documents still rely on the letter of credit and bill of lading. So it need to change the process of transmission of electronic trade documents utilizing non-negotiable sea waybill instead of bill of lading. In this study, I pointed out two problems as obstacle factors in global transmission of electronic trade documents. First is the system connection problem between domestic and foreign banks and second is the electronic right transfer problem in the bill of lading. Electronic bill of lading has already been made, but are not used and e-Nego has also not been activated under the above issues. Therefore, it should be solved previously the above problems for the global transmission of electronic trade documents under the letters of credit. However, in transactions of transfer, it does not need the inter-bank connection and also does not occur the electronic right transfer problem of bill of lading if using the non-negotiable seaway bill instead of bill of lading. In this paper, I recommend the global transmission strategies of e-trade documents using the non-negotiable sea waybill in transactions of transfer. Hopefully, I expect the activation of global transmission of e-trade documents through the utilization of electronic non-negotiable sea waybill as suggested by this study.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.64
• /
• pp.39-64
• /
• 2014

The object of International License Contract is technology. Technology is means to produce visible goods, which are human's intellectual creations such as Intellectual Property Right - patent, design, trademark- and Know-how. Unlike visible goods which decrease as being used, these technologies are possible to be produced expansively and develop additionally. Therefore, the way to make a contract of goods is a sales contract which transfers ownership while technology follows license contract which gives approval of use for a certain period. International license contract means that licensor has right to possess, allows licensee to use licensed technology for a fixed period and takes royalty. So there are various matters such as selection of the duration of a contract, confirmation of technology range, competition limitation, technique guidance and support, calculation of royalty, withholding tax between parties. This study examines licensor's grant of license and competition limitation. Intellectual property rights fundamentally give exclusive rights to the creator so the licensor use or dispose of his or her intellectual property rights at will. Technology transfer is possible through license contract because of this right. But licensor must exercise his or her intellectual property rights within a reasonable limit. It means, when licensor makes an unreasonable demand abusing his or her position, it is regarded as competition limitation clause and the deal itself may become null. Therefore, restraint on competition needs to be examined in detail as it influences on contract validity. Each country has their own competition laws for establishing a fair market order and inspection guide and guideline for judging whether there is any unfair act related to intellectual property rights. Judgment on intellectual property rights is subject the technology-introduced country's domestic laws and thus, contracting parties each need to precede opposite nation's domestic laws system.

• Solar Energy
• /
• v.12 no.2
• /
• pp.28-42
• /
• 1992

This investigation is carried out numerically for the two dimensional natural convection and surface radiation heat transfer in a square enclosure. The bottom wall is a constant heat flux at hot temperature and also top wall is isothermal at cold temperature whereas the left and right side walls are adiabatic except a transparent window on the right side partially. The exchange of radiant energy is obtained by the net radiation method and the shape factor by the crossed string method. The change in temperature and Nusselt number distributions of the walls due to the effect of the wall emissivity for various emissivities and for various dimensionless insolation energies are investigated. The dimensionless local convective heat flux and local radiative heat flux distributions in the wall except an adiabatic wall are also compared.